• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2489-2494
• /
• 2008

The two-dimensional circular cylinder freely falling in a channel has been simulated by using Immersed boundary - lattice Boltzmann method in order to analyze the characteristics of motion originated by the interaction between the fluid and the solid. The wide range of the solid/fluid density ratio has been considered to identify the effect of the solid/fluid density ratio on the motion characteristics such as the falling time, the terminal velocity and the trajectory in the vertical and horizontal directions. In addition, the effect of the gap between the cylinder and the wall on the motion of two-dimensional circular cylinder freely falling has been revealed by taking into account a various range of the gap size. The Reynolds number in terms of the terminal velocity is diminished as the cylinder becomes close to the wall at the initial dropping position, since the repulsive force induced between the cylinder and wall constrains the vertical motion. Quantitative information about the flow variables such as the pressure coefficient and vorticity on the cylinders is highlighted.

• 한국전자파학회논문지
• /
• 제23권8호
• /
• pp.995-1001
• /
• 2012

본 논문에서는 다기능 레이더를 이용한 탄도탄 추적을 위해 알파-베타 필터, 칼만 필터, 탄도탄 추적 필터의 성능을 분석하였다. 제시된 필터들은 탄도탄의 궤적과 다기능 레이더의 신호처리기를 모의하는 시뮬레이터를 기반으로 시뮬레이션 되었다. 그 결과, 제안한 탄도탄 추적 필터의 성능이 알파-베타 필터에 비해 최대 75.3 %의 속도 오차 감소 효과가 있음을 확인하였다. 또한, 추적 초기화 이후에 제안한 필터가 칼만 필터보다 거리, 속도 오차가 작아 안정적인 성능을 보였다. 마지막으로 각도 추적에서도 전체 시나리오 구간에서 안정적인 동작을 확인하여 초고속 탄도탄 표적의 추적에 적합함을 입증하였다.

• 전기학회논문지
• /
• 제61권7호
• /
• pp.1032-1040
• /
• 2012

This paper proposes controller of leader robot considering following robot with input constraints based on leader-following approach. In the previous formation control researches, it was assumed that leader and follower is same object. If leader robot drives as maximum speed that the initial position errors still remain even if following robot have same velocity as a leader. In the situation that velocity of following robot is lower than its leader robot, following robot cannot follow leader robot. Furthermore, the following robot will not be able to made formation with leader robot and keep proximity communication or sensing range. Therefore, multiple mobile robot system using leader-following method should be guaranteed range to get information each other. In this paper, Leader robot is driving to goal position using linear controller and following robot is following trajectory to be made from leader robot. We assume that following robot has input constraints to realize different performance between leader robot and following robot. We design controller of leader robot for desired goal position including the errors between formation and following robot. Thus, we propose leader robot controller considering input constraints of following robot. Finally, we were able to confirm the validity of the proposed method based on simulation results.

• 대한조선학회논문집
• /
• 제42권5호
• /
• pp.427-434
• /
• 2005

The free surface influenced the wake behind a rotating propeller and its effects were investigated experimentally in a circulating water channel with the variation of water depth. Instantaneous velocity fields were measured using two-frame PIV technique and ensemble-averaged to study the phase-averaged flow structure in the wake region. For an isolated propeller, the flow behind the propeller is affected only by the propeller rotation speed, the leading on the blades and the proximity of the propeller to the free surface. The phase-averaged mean velocity fields show that the potential wake and the viscous wake developed on the blade surfaces. The interaction between the tip vortices and the slipstream causes the oscillating trajectory of tip vortices. The presence of the free surface greatly affected the wake structure, especially for propeller immersion depth of 0.6D. At small immersion depths, the free surface modified the tip and trailing vortices and the slipstream flow structure downstream of X/D = 0.3 in the propeller wake.

• 한국기계기술학회지
• /
• 제20권6호
• /
• pp.809-817
• /
• 2018

The model predictive controller performance of the mobile robot is set to an arbitrary value because it is difficult to select an accurate value with respect to the controller parameter. The general model predictive control uses a quadratic cost function to minimize the difference between the reference tracking error and the predicted trajectory error of the actual robot. In this study, we construct a predictive controller by transforming it into a quadratic programming problem considering velocity and acceleration constraints. The control parameters of the predictive controller, which determines the control performance of the mobile robot, are used a simple weighting matrix Q, R without the reference model matrix $A_r$ by applying a quadratic cost function from which the reference tracking error vector is removed. Therefore, we designed the predictive controller 1 and 2 of the mobile robot considering the constraints, and optimized the controller parameters of the predictive controller using a genetic algorithm with excellent optimization capability.

• 한국해양공학회지
• /
• 제37권4호
• /
• pp.158-163
• /
• 2023

Objects adrift can cause considerable damage to coastal infrastructure and property during tsunami and storm surge events. Despite the potential for harm, the drifting behavior of these objects remains poorly understood, thereby hindering effective prediction and mitigation of collision damage. To address this gap, this study employed a motion analysis program to track a drifting container's location using images from an existing laboratory experiment. The container's trajectory and velocity were calculated based on the positions of five markers strategically placed at its four corners and center. Our findings indicate that the container's maximum drift velocity and distance are directly influenced by the scale of the solitary wave and inversely related to the container's weight. Specifically, heavier containers are less likely to be displaced by solitary waves, while larger waves can damage coastal structures more. This study offers new insights into container drift behavior induced by solitary waves, with implications for enhancing coastal infrastructure design and devising mitigation strategies to minimize the risk of collision damage.

• 대한기계학회논문집A
• /
• 제34권10호
• /
• pp.1359-1366
• /
• 2010

최근 많은 전자제어기술이 개발되고 있으며 또한 차량에 적용되고 있다. 이러한 기술들 중 throttle-by-wire, brake-by-wire, steer-by-wire 와 같은 X-by-wire 가 대표적이며 이는 기계적으로 연결된 부분이 전기적인 신호나 액추에이터로 대체된 것이다. 본 논문에서는 스쿨존에서의 차량의 속도 제어를 위하여 throttle-by-wire, brake-by-wire 가 고려되었으며 특히 스쿨 존에서는 다른 지역에 비해 사고가능성이 높다. 그 이유는 보행자가 횡단 시에 다수의 운전자들이 규정속도를 지키지 않기 때문이다. 따라서 본 논문에서는 스쿨 존에서 규정속도 내로 주행하도록 throttle-by-wire, brake-by-wire 를 이용하여 차량을 감속 제어하였으며 이를 위하여 양산차량의 엔진과 변속기의 제원을 사용하였다. 둘째, 차량의 감속에 있어서 운전자와 승객이 불쾌감을 느낄 수 있는 급격한 감속을 줄이기 위하여 제안된 3 차 궤적 추종법을 적용시켰으며 궤적 추종을 위하여 퍼지-PID 제어를 사용하였다. 마지막으로 시뮬레이션을 통하여 제안된 차량의 감속 제어 시스템의 성능을 확인하였다.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1996년도 The 9th KACG Technical Annual Meeting and the 3rd Korea-Japan EMGS (Electronic Materials Growth Symposium)
• /
• pp.179-200
• /
• 1996

The intrinsic instabilities of fluid flow occurred in the melt of the Czochralski crystal growth system Czochralski method, asymmetric flow patterns and temperature profiles in the melt have been studied by many researchers. The idea that the non-symmetric structure of the growing equipment is responsible for the asymmetric profiles is usually accepted at the first time. However further researches revealed that some intrinsic instabilities not related to the non-symmetric equipment structure in the melt could also appear. Ristorcelli had pointed out that there are many possible causes of instabilities in the melt. The instabilities appears because of the coupling effects of fluid flow and temperature profiles in the melt. Among the instabilities, the B nard type instabilities with no or low crucible rotation rates are analyzed by the visualizing experiments using X-ray radiography and the 3-D numerical simulation in this study. The velocity profiles in the Silicon melt at different crucible rotation rates were measured using X-ray radiography method using tungsten tracers in the melt. The results showed that there exits two types of fluid flow mode. One is axisymmetric flow, the other is asymmetric flow. In the axisymmetric flow, the trajectory of the tracers show torus pattern. However, more exact measurement of the axisymmetrc case shows that this flow field has small non-axisymmetric components of the velocity. When fluid flow is asymmetric, the tracers show random motion from the fixed view point. On the other hand, when the observer rotates to the same velocity of the crucible, the trajectory of the tracer show a rotating motion, the center of the motion is not same the center of the melt. The temperature of a point in the melt were measured using thermocouples with different rotating rates. Measured temperatures oscillated. Such kind of oscillations are also measured by the other researchers. The behavior of temperature oscillations were quite different between at low rotations and at high rotations. Above experimental results means that the fluid flow and temperature profiles in the melt is not symmetric, and then the mode of the asymmetric is changed when rotation rates are changed. To compare with these experimental results, the fluid flow and temperature profiles at no rotation and 8 rpm of crucible rotation rates on the same size of crucible is calculated using a 3-dimensional numerical simulation. A finite different method is adopted for this simulation. 50×30×30 grids are used. The numerical simulation also showed that the velocity and flow profiles are changed when rotation rates change. Futhermore, the flow patterns and temperature profiles of both cases are not axisymmetric even though axisymmetric boundary conditions are used. Several cells appear at no rotation. The cells are formed by the unstable vertical temperature profiles (upper region is colder than lower part) beneath the free surface of the melt. When the temperature profile is combined with density difference (Rayleigh-B nard instability) or surface tension difference (Marangoni-B nard instability) on temperature, cell structures are naturally formed. Both sources of instabilities are coupled to the cell structures in the melt of the Czochralski process. With high rotation rates, the shape of the fluid field is changed to another type of asymmetric profile. Because of the velocity profile, isothermal lines on the plane vertical to the centerline change to elliptic. When the velocity profiles are plotted at the rotating view point, two vortices appear at the both sides of centerline. These vortices seem to be the main reason of the tracer behavior shown in the asymmetric velocity experiment. This profile is quite similar to the profiles created by the baroclinic instability on the rotating annulus. The temperature profiles obtained from the numerical calculations and Fourier transforms of it are quite similar to the results of the experiment. bove esults intend that at least two types of intrinsic instabilities can occur in the melt of Czochralski growing systems. Because the instabilities cause temperature fluctuations in the melt and near the crystal-melt interface, some defects may be generated by them. When the crucible size becomes large, the intensity of the instabilities should increase. Therefore, to produce large single crystals with good quality, the behavior of the intrinsic instabilities in the melt as well as the effects of the instabilities on the defects in the ingot should be studied. As one of the cause of the defects in the large diameter Silicon single crystal grown by the

• 한국지반공학회논문집
• /
• 제31권11호
• /
• pp.49-60
• /
• 2015

개방수역 퇴적물 처리는 해안공사에서 다양한 목적으로 수행되고 있다. 매립토의 거동은 수중 침강단계와 하상 퇴적단계로 구분하여 해석을 수행하였으며, 이를 이용하여 매립토의 수중 투기에 의한 유보율을 평가하였다. 매립토 입자의 침강단계는 thermal 단계와 swarm 단계로 구분하여 입자구름의 침강속도와 환산 반경에 대한 일반화된 방정식을 제시하였다. 하상 퇴적단계는 개발된 프로그램을 이용하여 매립토의 마찰각과 유속의 변화에 따른 퇴적형상의 성장계수를 평가하였다. 유보율은 매립토의 해수면 위의 투기지점을 원의 중심으로 하고 원의 유효 반경내에 잔류하는 매립토의 질량비로 정의하였다. 싱가포르 현장을 기준으로 수심을 20m, 유속은 0.0-1.5m/s 구간에서 유효반경 5m에 대한 유보율도를 제시하였다. 이는 해안 매립공사에서 매립토의 유실율을 저감하여 시공성을 개선하고 주변환경오염을 최소화하는 자료로 활용될 수 있다.

• Nuclear Engineering and Technology
• /
• 제53권4호
• /
• pp.1119-1126
• /
• 2021

Spacer grid with mixing vane had been widely used in nuclear reactor core. One of the main feather of spacer grid with mixing vane was that strong swirl flow was formed after the spacer grid. The swirl flow not only changed the bubble generation in the near wall field, but also affected the bubble behaviors in the center region of the subchannel. The interaction between bubble and the swirl flow was one of the basic phenomena for the two phase flow modeling in fuel assembly. To obatin better understanding on the bubble behaviors in swirl flow, full three dimension numerical simulations were conducted in the present paper. The swirl flow was assumed in the cylindral calculation domain. The bubble interface was captured by Volume Of Fluid (VOF) method. The properties of saturated water and steam at different pressure were applied in the simulation. The bubble trajectory, motion, shape and force were obtained based on the bubble parameters captured by VOF. The simulation cases in the present study included single bubble with different size, at different angular velocity conditions and at different pressure conditions. The results indicated that bubble migrated to the center in swirl flow with spiral motion type. The lateral migration was mainly related to shear stress magnitude and bubble size. The bubble moved toward the center with high velocity when the swirl magnitude was high. The largest bubble had the highest lateral migration velocity in the present study range. The effect of pressure was small when bubble size was the same. The prelimenery simulation result would be beneficial for better understanding complex two phase flow phenomena in fuel assembly with spacer grid.