• Structural Engineering and Mechanics
• /
• 제85권5호
• /
• pp.645-654
• /
• 2023

Based on first-order shear deformation theory, a wave propagation model of graphene platelets reinforced metal foams (GPLRMFs) circular plates is built in this paper. The expressions of phase-/group- velocities and wave number are obtained by using Laplace integral transformation and Hankel integral transformation. The effects of GPLs pattern, foams distribution, GPLs weight fraction and foam coefficient on the phase and group velocity of GPLRMFs circular plates are discussed in detail. It can be inferred that GPLs distribution have great impacts on the wave propagation problems, and Porosity-I type distribution has the largest phase velocity and group velocity, followed by Porosity-III, and finally Porosity-II; With the increase of the GPLs weight fraction, the phase- and group- velocities for the GPLRMFs circular plate will be increased; With the increase of the foam coefficient, the phase- and group- velocities for the GPLRMFs circular plate will be decreased.

• Steel and Composite Structures
• /
• 제49권3호
• /
• pp.281-291
• /
• 2023

Due to the fact that the nonlinear low-velocity impact response of graphene platelets reinforced metal foams (GPLRMF) doubly curved shells have not been investigated in the existing works, this paper aims to solve this issue. Using Reddy's high-order shear deformation theory (HSDT), the nonlinear governing equations of GPLRMF doubly curved shells are obtained by Euler-Lagrange method, discretized by Galerkin principle, and solved by the fourth-order Runge-Kutta method to obtain the impact force and central deflection. The nonlinear Hertz contact law is applied to determine the contact force. Finally, the impacts of graphene platelets (GPLs) distribution pattern, porosity distribution form, porosity coefficient, damping coefficient, impact parameters (radius and initial velocity), GPLs weight fraction, pre-stressing force and different shell types on the low-velocity impact curves are analyzed. It can be found that, among the four shell structures, the impact resistance of spherical shell is the best, while that of cylindrical shell is the worst.

• 한국해양학회지
• /
• 제20권2호
• /
• pp.10-21
• /
• 1985

음원과 3개의 수진기를 사용하여 포항,부산,여수 및 군산연근해 수심 10~50m 의 표층퇴적물에서 음파전달속도(Sound velocity)와 감쇠계수(attenuation coefficient)를 구하였다. 연구지역에서의 층퇴적물에서 측정된 음파전달속도는 1,444 ~1,510m/sec, 감쇠계수는 0.82~3.70dB/m로 나타나고 있다. 퇴적물과의 관계는 입 도와 공치율이 감소함에 따라, 또한 밀도가 증가함에 따라 음파전달속도가 증가한 다. 음파전달속도와 퇴적물의 물성간에는 다음과 같은 관계식을 가진다. Vp=1512.28 406-9.16083(Mz)＋0.20795(Mz)$^{2}$, Vp=1876.15527-597.50397(d)＋210.48375(d)$^{2}$, Vp=1559.47217-2.09266(n)$^{2}$. 여기서 Vp는 음파전달속도, Mz는 퇴적물의 평균 입도, d는 밀도 그리고 n은 공치율이다. 그러나 감쇠계수와의 관계는 그 양상이 다 르게 나타난다. 입도와 밀도가 증가하거나 공치율이 감소함에 따라 감쇠계수는 커 졌다가 다시 작아지는 곡선관계를 보이는데 이를 2차회귀방정식으로 나타내면 다음 과 같다. a=1.85217＋0.67197(Mz)-0.09035 (Mz)$^{2}$, a=48.87859＋58.21721(d)-16.3.143(d)$^{2}$, a=2.06765＋0.07215(n)-0.00111(n)$^{2}$.여기서 a는 감쇠계수 Mz는 평균입도, d는 밀도, n은 공치율이다. 감쇠현상이 가장 심한 퇴적상은 실트질 砂~細砂로서 k값은 0.86dB/m/KHz이다.

• 대한기계학회논문집B
• /
• 제38권10호
• /
• pp.797-805
• /
• 2014

본 연구의 목적은 해수 흡입구를 고려한 초공동 수중운동체 캐비테이터의 항력과 양력특성 및 해수 흡입유로의 입구에서 압력손실에 대해 예측하는 것이다. 흡입구 직경과 유로에서의 속도, 흡입구의 곡률반경 및 캐비테이터의 받음각이 미치는 영향에 대해 유동해석을 수행하였다. 연구 결과 직경비가 커지면, 항력계수와 압력손실계수가 감소하며, 속도비가 증가할 때 항력계수와 양력계수는 감소하고 압력손실계수는 증가한다. 해수 흡입구에 곡률을 주면 항력계수와 양력계수에는 영향을 미치지 않지만, 압력손실계수가 크게 감소한다. 캐비테이터의 받음각은 항력계수와 압력손실계수에 미소한 영향만을 주나, 양력계수를 크게 변화시킨다. 초공동 수중운동체 설계 시 본 연구 결과를 반영할 수 있다.

• Smart Structures and Systems
• /
• 제17권1호
• /
• pp.73-89
• /
• 2016

The stress dependence of ultrasonic wave velocity is known as the acoustoelastic effect. This effect is useful for stress monitoring if the acoustoelastic coefficient of a subject medium is known. The acoustoelastic coefficients of metallic materials such as steel have been studied widely. However, the acoustoelastic coefficient of concrete has not been well understood yet. Basic constituents of concrete are water, cement, and aggregates. The mix proportion of those constituents greatly affects many mechanical and physical properties of concrete and so does the acoustoelastic coefficient of concrete. In this study, influence of the water-cement ratio (w/c ratio) and the fine-coarse aggregates ratio (fa/ta ratio) on the acoustoelastic coefficient of concrete was investigated. The w/c and the fa/ta ratios are important parameters in mix design and affect wave behaviors in concrete. Load-controlled uni-axial compression tests were performed on concrete specimens. Ultrasonic wave measurements were also performed during the compression tests. The stretching coda wave interferometry method was used to obtain the relative velocity change of ultrasonic waves with respect to the stress level of the specimens. From the experimental results, it was found that the w/c ratio greatly affects the acoustoelastic coefficient while the fa/ta ratio does not. The acoustoelastic coefficient increased from $0.003073MPa^{-1}$ to $0.005553MPa^{-1}$ when the w/c ratio was increased from 0.4 to 0.5. On the other hand, the acoustoelastic coefficient changed in small from $0.003606MPa^{-1}$ to $0.003801MPa^{-1}$ when the fa/ta ratio was increased from 0.3 to 0.5. Finally, it was also found that the relative velocity change has a linear relationship with the stress level of concrete.

• 대한기계학회논문집B
• /
• 제29권6호
• /
• pp.671-686
• /
• 2005

The transient nature and complex geometries of two-phase gas-liquid flows cause fundamental difficulties when measuring flow velocity using an electromagnetic flowmeter. Recently, a current-sensing flowmeter was introduced to obtain measurements with high temporal resolution (Ahn et al.). In this study, current-sensing flowmeter theory was applied to measure the fast velocity transients in slug flows. The velocity fields of axisymmetric gas-liquid slug flow in a vertical pipe were obtained using Volume-of-Fluid (VOF) method, and the virtual potential distributions for the electrodes of finite size were also computed using the finite volume method for simulating slug flow. The output signal prediction for slug flow was carried out from the velocity and virtual potential (or weight function) fields. The flowmeter was numerically calibrated to obtain the cross-sectional liquid mean velocity at an electrode plane from the predicted output signal. Two calibration parameters are proposed for this procedure: a flow pattern coefficient and a localization parameter. The flow pattern coefficient was defined by the ratio of the liquid resistance between the electrodes for two-phase flow with respect to that for single-phase flow, and the localization parameter was introduced to avoid errors in the flowmeter readings caused by liquid acceleration or deceleration around the electrodes. These parameters were also calculated from the computed velocity and virtual potential fields. The results can be used to obtain the liquid mean velocity from the slug flow signal measured by a current-sensing flowmeter.

• 한국지반공학회논문집
• /
• 제33권4호
• /
• pp.17-24
• /
• 2017

지진과 같은 외부 하중하에서 CFRD 거동은 사력존의 전단파 속도(또는 전단 탄성계수)분포에 큰 영향을 받는다. 일반적으로 사력존의 전단파 속도 분포는 주상도의 형태로 표면파 시험과 같은 비파괴 시험에 의해 결정될 수 있다. 이때 한정된 수의 실험에서 결정된 전단파 속도 주상도에는 불확실성이 존재하며, 이러한 불확실성은 사력존에 존재하는 물성치 공간 변동성에 의해 발생하게 된다. 내진 해석과 같은 다양한 해석에서 물성치 변동성에 의해 발생할 수 있는 해석 결과의 불확실성은 신뢰성 기반 해석을 통해 고려될 수 있다. 신뢰성 기반해석에서는 재료 물성치의 변동계수 결정을 통해 이러한 불확실성을 해석에 반영한다. 본 연구에서는 국내 CFRD 사력존을 위한 전단파 속도변동계수를 결정하였다. 이를 위해 국내 CFRD 사력존에서 결정된 전단파 속도 주상도들과 하모닉 웨이브릿 해석에 기반한 기법을 사용하여 국내 CFRD 사력존에 존재 가능한 600개의 전단파 속도 주상도를 생성하고 이를 이용하여 사력존 전단파 속도 분포의 깊이별 변동계수를 결정하였다.

• 한국방재안전학회논문집
• /
• 제10권1호
• /
• pp.75-84
• /
• 2017

내풍설계에서 기본풍속의 경우 우리나라는 10분 평균풍속을 이용하고 있지만, 기후변화와 태풍의 직간접 영향 및 강도증가로 인한 순간최대풍속이 구조물에 미치는 영향이 더 크다는 사실이 알려지고 있고, 일부 다른 나라에서는 이러한 순간풍속의 효과를 고려 3초의 평균풍속을 이용하고 있다. 본 논문에서는 1973-2016연까지의 일순간최대풍속의 확률과정, 통계적 성질, 난류의 특성 등을 평가하기 위하여 대표지점(17개 지점)을 선정했다. 선정된 각 지점에 대한 일순간최대풍속자료는 기상청으로부터 획득했다. 획득된 순간풍속의 해석결과 다음과 같은 결론을 얻었다. 1. 제주 서귀포 여수 부산에서의 8 7 9월에 0.2~0.35%로 나타났고, 서울 대관령은 3 4 5월에 0.25%로 나타났다. 2. 확률과정의 왜도평가에서 해안지역보다는 내륙지역에서의 더 큰 비정규성을 나타냈다. 3. 인접지역의 상관계수 평가에서 서울 인천(0.8), 대전 청주(0.75), 제주 서귀포(0.72) 순으로 나타났으며, 대관령 강릉은(-0.07), 전주 군산(0.0)은 인접지역의 영향이 거의 없는 것으로 나타났다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권1호
• /
• pp.52-61
• /
• 2009

This experiment was conducted in attempt of improving hydrodynamic efficiency of the propulsion mechanism by installing a spring to the wing so that the opening angle of the wing in one stroke can be changed automatically, compared to the existing method of fixed maximum opening angle in Weis-Fogh type ship propulsion mechanism. Average thrust coefficient was almost fixed with all velocity ratio with the prototype, but with the spring type, thrust coefficient increased sharply as velocity ratio increased. Average propulsive efficiency was larger with bigger opening angle in the prototype, but in the spring type, the one with smaller spring coefficient had larger value. In the range over 1.0 in velocity ratio where big thrust can be generated, spring type had more than twice of propulsive efficiency increase compared to the prototype.

• 설비공학논문집
• /
• 제2권2호
• /
• pp.112-118
• /
• 1990

Characteristics of heat transfer in a smooth and finned tube located vertically in atmospheric fluidized bed combustor which uses low grade anthracite coals was studied. Experiments to investigate the characteristics of heat transfer between smooth and finned tube are carried out and the results depend on particle size, fluidizing air velocity and bed temperature are summarized. It is found that heat transfer coefficient of the smooth and finned tube increases with decrease in particle diameter and increase in bed temperature. Furthermore, it is noted that heat transfer coefficient increase at the first with increase in the velocity of fluidizing air and tends to decrease at a certain fluidizing air velocity. The increase of heat transfer coefficient for the finned tube is appeared to be increased in 30% compared to that for the smooth tube.