• 제목/요약/키워드: Velocimetry

검색결과 850건 처리시간 0.023초

표면영상유속계(SIV)를 활용한 홍수유출량 산정 시 주·야간영상의 정확도 비교분석 (Comparative Analysis of Day and Night Time Video Accuracy to Calculate the Flood Runoff Using Surface Image Velocimeter (SIV))

  • 김용석;양성기;류권규;김동수
    • 한국환경과학회지
    • /
    • 제24권4호
    • /
    • pp.359-369
    • /
    • 2015
  • This study analyzed the velocimetry of runoff and measured the flood discharge by applying the SIV (Surface Image Velocimetrer) to the daytime and nighttime flow image data with special reference to Seong-eup Bridge at Cheonmi stream of Jeju during the flow by the severe rainstorm on May 27, 2013. A 1000W lighting apparatus with more than 150 lux was installed in order to collect proper nighttime flow image applied to the SIV. Its value was compared and analyzed with the velocity value of the fixed electromagnetic wave surface velocimetry (Kalesto) at the same point to check the accuracy and applicability of the measured velocity of flow. As a result, determination coefficient $R^2$ values were 0.891 and 0.848 respectively in line with the velocity distribution of the daytime and nighttime image and the flow volume measured with Kalesto was approximately 18.2% larger than the value measured with the SIV.

Particle image velocimetry measurement of complex flow structures in the diffuser and spherical casing of a reactor coolant pump

  • Zhang, Yongchao;Yang, Minguan;Ni, Dan;Zhang, Ning;Gao, Bo
    • Nuclear Engineering and Technology
    • /
    • 제50권3호
    • /
    • pp.368-378
    • /
    • 2018
  • Understanding of turbulent flow in the reactor coolant pump (RCP) is a premise of the optimal design of the RCP. Flow structures in the RCP, in view of the specially devised spherical casing, are more complicated than those associated with conventional pumps. Hitherto, knowledge of the flow characteristics of the RCP has been far from sufficient. Research into the nonintrusive measurement of the internal flow of the RCP has rarely been reported. In the present study, flow measurement using particle image velocimetry is implemented to reveal flow features of the RCP model. Velocity and vorticity distributions in the diffuser and spherical casing are obtained. The results illuminate the complexity of the flows in the RCP. Near the lower end of the discharge nozzle, three-dimensional swirling flows and flow separation are evident. In the diffuser, the imparity of the velocity profile with respect to different axial cross sections is verified, and the velocity increases gradually from the shroud to the hub. In the casing, velocity distribution is nonuniform over the circumferential direction. Vortices shed consistently from the diffuser blade trailing edge. The experimental results lend sound support for the optimal design of the RCP and provide validation of relevant numerical algorithms.

소형 액체로켓엔진 인젝터의 분무 분열특성에 대한 연료분사압력의 영향 (Effects of Fuel-Injection Pressure on the Spray Breakup Characteristics in Small LRE Injector)

  • 정훈;김성초;박정;김정수
    • 한국추진공학회지
    • /
    • 제11권3호
    • /
    • pp.50-57
    • /
    • 2007
  • Particle Image Velocimetry(PIV) 및 Dual-mode Phase Doppler Anemometry(DPDA) 기법을 적용하여 소형 액체로켓엔진에 사용되는 인젝터의 분무특성 규명을 위한 연구를 수행하였다. PIV 측정법으로 순간평면 이미지를 획득하여 분무 거동을 정성적으로 예측하고, 분사각 관련 인젝터 성능평가 기법을 수렵하였다. 또, DPDA 측정법을 통해 액적의 속도와 크기 등의 분무거리에 따른 변이를 정량화하고, 인젝터의 미립화 성능을 관찰하였다. 본 연구의 궁극적인 목적은 분무특성에 대한 명확한 이해를 통해 개발하고자 하는 새로운 인젝터의 설계변수 도출 및 분무성능 평가기준을 마련하기 위함이다.

Velocity Field Masking Technique for Coastal Engineering Experiments

  • Adibhusana, Made Narayana;Ryu, Yong-Uk
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2021년도 학술발표회
    • /
    • pp.154-154
    • /
    • 2021
  • Since the development of Bubble Image Velocimetry (BIV) technique as the complementary technique of Particle Image Velocimetry (PIV), the application of digital imaging technique in the field of hydraulic and coastal engineering increased rapidly. BIV works very well in multi-phase flow (air-water) flows where the PIV technique doesn't. However, the velocity field obtained from BIV technique often resulted in a velocity vector on the outside of the flow (false velocity) since the Field of View (FOV) usually not only cover the air-water flow but also the area outside the flow. In this study, a simple technique of post processing velocity field was developed. This technique works based on the average of the pixel value in the interrogation area. An image of multi-phase flow of wave overtopping was obtained through physical experiment using BIV technique. The velocity calculation was performed based on the similar method in PIV. A velocity masking technique developed in this study then applied to remove the false velocity vector. Result from non-masking, manually removed and auto removed false velocity vector were presented. The masking technique show a similar result as manually removed velocity vector. This method could apply in a large number of velocity field which is could increase the velocity map post-processing time.

  • PDF

고속푸리에변환을 이용한 시공간 체적 표면유속 산정 기법 개발 (Calculation of surface image velocity fields by analyzing spatio-temporal volumes with the fast Fourier transform)

  • 류권규;유병호
    • 한국수자원학회논문집
    • /
    • 제54권11호
    • /
    • pp.933-942
    • /
    • 2021
  • 홍수시 하천의 유속을 효율적이고 안전하게 측정할 수 있는 방법의 하나로 제시된 것이 표면 영상유속측정법이다. 표면영상유속측정법에는 영상분석 기법에 따라 다양한 종류가 있으나, 이 중에서도 최근 일정시간 동안의 유속의 시간평균을 한 번에 산정할 수 있는 시공간영상 유속계측법이 하천의 표면유속 측정에 대한 연구가 활발히 진행되고 있다. 시공간영상 유속계측법은 일정 시간 동안의 시공간 영상을 한 번에 분석하기 때문에, 유속산정 시간을 획기적으로 줄일 수 있는 장점이 있다. 그러나 시공간영상 유속계측법은 주흐름방향을 정확히 알지 못하면 오차를 유발할 수 있다. 본 연구는 표면영상을 시간적으로 누적한 시공간체적을 구성하고, 이 시공간체적에서 시간축 방향으로 최대값 영상을 만든 뒤 이를 고속푸리에변환하여 주흐름방향을 탐색하는 새로운 기법을 제안하였다. 이 방법은 공간영상에서 주흐름방향을 찾는 첫단계와 주흐름방향의 시공간영상에서 유속의 크기를 산정하는 두번째 단계로 구성되어 있다. 첫번째 단계에서 찾아낸 주흐름방향으로 시공간영상을 작성하고, 이 시공간영상의 고속푸리에변환을 이용하여 유속을 산정하였다. 제안된 방법은 주흐름방향을 정확하게 추정하여 시공간영상을 생성하고 분석하므로, 기존 방법들이 취약했던 이차원 흐름에 대해서도 신속하고 정확한 유속분석이 가능하다. 개발된 방법을 공동흐름에 대한 인공영상에 적용한 결과 비교적 정확하게 2차원 유속분포 측정이 가능한 것으로 나타났다.

상관영역 크기 변화에 따른 영상유속계의 오차 분석 (Error Analysis of Image Velocimetry According to the Variation of the Interrogation Area)

  • 김서준;류권규;윤병만
    • 한국수자원학회논문집
    • /
    • 제46권8호
    • /
    • pp.821-831
    • /
    • 2013
  • 최근 수리 실험 및 계측 분야에 영상유속계가 많이 이용되고 있다. 그러나 영상유속계의 영상 분석에 대한 표준적인 방법과 측정 불확도가 정립되어 있지 않아 일반 사용자들이 사용하기 어려운 것이 사실이다. 특히 영상유속계를 이용한 유속 산정 시 상관영역 크기 결정에 대한 기준이 없기 때문에 사용자마다 유속 산정 결과가 차이가 나는 문제가 있다. 이에 본 연구에서는 영상유속계의 상관영역 크기 변화에 따른 오차분석을 통해 상관영역 크기 결정을 위한 자료를 제시하고 자한다. 오차분석을 위해 12개의 인공영상군을 제작하였으며, 다양한 입자수와 입자크기의 영상을 획득한 후 상관영역의 크기를 변화시키면서 산정한 유속을 인공영상의 유속 참값과 비교하여 오차분석을 수행하였다. 오차 분석결과 상관영역의 크기 변화에 따라 영상유속계로 산정한 유속값에 대한 오차가 달라짐을 확인하였고, 상관영역의 크기를 크게 결정할수록 오차가 줄어드는 것으로 나타났고, 동일한 상관영역의 크기로 유속을 산정할 경우 입자 크기가 증가할수록 또는 입자수가 증가할수록 오차가 작게 나타났다. 특히 영상유속계의 오차는 입자의 크기 보다는 입자수의 변화에 좀 더 영향을 많이 받는 것으로 나타났다. 또한 상관영역의 크기가 커짐에 따라 최대 오차와 최소 오차간의 간격이 줄어드는 것을 확인하였으며, 영상 전체에서 산정한 유속의 평균 오차가 5% 이하를 만족시키는 상관영역 크기를 기준으로 그 이하의 상관영역에 대해서는 최대 오차와 최소 오차간의 차이가 크게 나타나 영상유속계의 측정 불확실성이 큰 것으로 나타났다. 영상유속계의 신뢰수준별 입자밀도 변화에 따른 최소 상관영역의 크기를 분석한 결과 전반적으로 입자밀도가 커짐에 따라 상관영역의 크기는 작아지는 것으로 나타났지만 입자밀도가 작더라도 입자수가 큰 경우에는 신뢰수준을 만족시키는 최소 상관영역의 크기가 감소하는 것으로 나타났다.