The purpose of this study is to propose the design of the patient's clothes for a disabled child between 4 and 6. For this, in this study, I would present the following design plan which includes 3 upper garments, 2 trousers and a one-piece dress. In case of the damage on head and neck, a neck line should be deep and wide thereby providing ease to the clothes. To facilitate injection and dressing/undressing, there should be parting from neck to cuff which can be fixed by snap or button. By rolling up sleeves with strings inside the cuffs and fixating plaster cast with snap button outside the cuffs. In case of body cast with plaster cast around body part, front adjusting part should be wider and the width should be adjusted with strings. In case of hip spica cast which covers waist, I separated front part and rear part, fixated them with snap buttons, gave more width to front adjusting part with strings to adjust width, which constitute one-piece dress. In case of shoulder spica cast, the other shoulder which is not covered with plaster cast should be exposed, and to prevent clothes' coming down, strings with snap button or velcro should be attached over a shoulder so that the length of the strings can be adjusted. In case of applying plaster cast or aid to the whole part of a leg, one part of trousers should be shorter so as to expose the injured part and there should be a parting with strings or velcros on the side for easy dressing/undressing. When plaster cast or splint is short, The strings are meant to adjust length of trousers. The partings are located 2 cm from side lines toward the center.
The study researched the characteristic of helmet and armor reflecting Joseon Dynasty by focusing on the helmet and armor appearing in dramas, the Tear of Dragon and King Sejong, whose common point is the historical background, the early Joseon Dynasty, among the historical dramas, which are manufactured on the basis of historical person or age. First, the helmet and armor appearing in historical drama was reproduced on the basis of historical record depending on age. In the early Joseon Dynasty, helmet was classified into cheomju and wonju and armor was classified into chalgap, swaejagap, gyeongbeongap, dujeonggap and dudumigap. In drama, the Tear of Dragon and King Sejong, for helmet, cheomju and wonju were used and for armor, chalgap, dujeonggap and dudumigap, whose type and manufacture method were similar to that of historical record, were reproduced. Second, the helmet and armor appearing in historical drama searched for function. In drama, the Tear of Dragon, rather than heavy iron, plastic and textile were used and the metal scale inside armor was removed. In drama, King Sejong, the weight of armor was decreased by removing the metal scale inside armor and easy wearing was secured by using velcro. Third, the helmet and armor appearing in historical drama expressed various dramatic interpretations. In drama, the Tear of Dragon, the same color as that of armor was adopted for helmet to provide stable and unified feeling. Visually splendid display was added to armor by matching powerful prime color and glossy metal. In drama, King Sejong, modem sense was added to helmet and armor by actively using pastel color reflecting modem fashion.
The objective of this study is to analyze the characteristic of a functional design for a commercial outdoor brand jacket based on 3 types of functions : windproof, waterproof, and cold proof. To analyze the design and fabric characteristics of outdoor jackets by function, 903 men's and women's outdoor jacket images were selected from the catalogues during S/S 2009 - F/W 2011 of the 6 brands: The North Face, Columbia Sports Wear, Kolon Sports, K2, Arcteryx and Mont-Bell. These brands were selected based on their high market share and brand awareness of the outdoor brands in Korea. In this study, design elements analysis was conducted as following 8 elements: hood/collar height/central front flap/waistline/pocket location/ventilation for the body part/sleeve patterns/cuff for the sleeve part. Fabrics were analyzed by the frequency of fabric types used in the 3 jacket types. According to the result derived from the analysis of the six brands of outdoor wear jacket design trends by year, detachable hood and a co-use of velcro and elastic bands have been mainly designed for all of windproof, waterproof, and cold proof jacket to all in order to respond quickly to changes in the external environment. For reinforced storage function on trekking, the number of pockets has been gradually growing, and a function was being developed to connect an electronic device to a pocket. The method, result, and collateral observations relevant to each of these phases are described. Outdoor jacket design characteristics were investigated for outdoor brands, which can provide data to suggest more accurate functional design, and satisfy functional design needs. In this regard, this research was significant in the sense that it suggested preliminary data to reconsider competitiveness of the brand products.
This research reviewed the developmental process of domestic outdoor wear and later analyzed the images given out by men's outdoor wear. The research results are as follows. First, military supplies left by American soldiers were dyed or reformed and then worn, and daily wear were mainly worn in the 1960s. Wears made from light and waterproof materials were worn and equipments were used in the 1970s. High functioning materials which allowed simultaneous breathability, waterproof and thermal insulation functions were used for wears in the 1980s. For the jacket especially, functionality was enhanced sith zippers, snaps and velcro to prevent cold air penetration in the 1990s. Florescent piping decorations and logo decorations, and prints and colors which reflected the trend, were used to emphasize fashionity and decorativeness in the 2000s. Second, Sophisticated image emphasized urban feeling with toned-down windbreaker jackets without much detail, with down jacket and pants. Casual image expressed a relaxed feeling with windbreaker jacket, shirts, jumper, vest and pants made of cotton, mesh knit and denim. Active image emphasized functionality by brightly colored windbreaker jackets, down jacket and pants. Ethnic image expressed an exotic mood with windbreaker jackets with stylized prints, with jumper, down jacket and pants. Military image showed a strong masculine feeling with jackets adorned with epaulettes, khaki colors and camouflage prints, with jumper, T-shirts, vest, shorts and pants. Avantgarde image exuded an experimental and unique feeling with jackets made of various colors and materials, such as cotton, jersey and glossy materials, with down jacket and jersey pants.
This study aims to contribute to the development of sports wearables. It was conducted by a convergence team of professionals in the fashion industry, kinesiology and sports studies, and computer science and engineering. The purpose of the current study was to design and develop a fabric-type fitness band for a sensor to measure acceleration during jump rope exercises. Computer science and engineering professionals developed the Arduino board and sensor, kinesiology and sports studies provided the necessary exercise protocol, and the fashion industry professionals developed the band. First, a fitness band preference survey was completed by men and women between the ages of 20 and 50. Typical uses of the band included tracking exercise amount as measured by the number of steps taken and calories burned. Strap watch closure, a single color and achromatic color, and soft and smooth touch materials were preferred as band design. Second, two fabric-type fitness bands were designed and developed. Design 1 had a 3-dimensional pocket for the sensor, bright blue color, and stretch binding around the edges and for a loop. Design 2 had a flat pocket for the sensor, achromatic color, mesh binding around the edges and two metal loops. Both designs had Velcro as a closure. Third, wear testing of both bands with the sensor were conducted of 15 women in their 20s. They wore the bands during jump rope exercises. Both bands generally satisfied the participants. The Design 2 band was slightly more satisfying than the Design 1 band.
Journal of the Korean Society of Clothing and Textiles
/
v.26
no.2
/
pp.337-348
/
2002
Based upon literature survey and questionnaire survey, this research tries to develop four new Cleanroom Garment in semiconductor industrial environment. The designs emphasize to minimize workers disconmfort so that they can not only cover human body fully but also reduce dust as much as possible during work hour in clean room. The new designs characteristics and results from both function test and dust emission test are as follows: 1. In order to reduce dust-emission, we develop new designs with hood, kimono sleeve, and back zipper. The designs with hood face positive test results in term of motion suitability and dust-omission. The design with seam in front, in particular, is effective to control dust-emission. 2. For the purpose of reducing dust-emission, we also emphasize to minimize ease of dust-proof wear, with reference to previous research and clothing experiment. The experiment participants report that the new wears are not so comfortable as existing ones, but they accept the new wears positive as effective in reducing dust-emission owing to reduced ease of Cleanroom Garment and sleeves. 3. A1so to reduce dust-emission in inner wear, we put inner wear in both Cleanroom Garments and inner wear, resulting to remove discomfort of wearers when changing clothes and of tight waist due to inner-trousers. 4. We develop new designs with elastic bands in both waist through the side lines and with velcro only at the back side. To remove twist in front contributes to reduce emission arising out of friction, also to free the appearance minding woman workers from worrying about exposed stomach. The new designs need to be accepted as a valuable alternative of Cleanroom Garment, in that they are highly effective to reduce dust-emission, which is the most important factor in the wear, in spite of some drawbacks in terms of motion-suitability, ease and appearance as shown in wearing test.
The concern for living a healthier and more active life has increased and the target market for the leisure-sportswear will broaden. This study suggests ideas and directions to develop horse-riding pants that consider fit satisfaction, demand performance and design requirements. A total of 203 riders were surveyed in Busan, Jeju, and Gwacheon horse racing tracks from November to December 2011 and from September to October 2012. Frequency analysis, ANOVA, t-test, and ${\chi}^2$-test were performed for the statistical analysis of the data using SPSS Win 21.0 program. The results of this study are as follows. The satisfaction of riding pants showed differences according to gender, riding career, BMI, age, and riding level. Females showed lower satisfaction of pant length than males. Riders with 1-4 years riding career showed more satisfaction of the front waist circumference. The group between 10 and 20 years more strongly preferred a rubber band waist than the group over 30 years. Those underweight preferred no pocket on the back. The intermediate-high riding level showed more fit satisfaction than those at the high level. Beginners put more importance on hip cushion, while riders over an intermediate level put more importance to sewing durability. Basic pants with beige and/or black full patch attached to the velcro hem were preferred by most riders. In conclusion, it is confirmed that design strategies in segmented riding pants market are necessary.
This study will broaden the application of doll costume product with historical characteristics and the image of unlined cheollik in the $17^{th}$ century period of transition during the Joseon Dynasty. Historical design sources were extracted from old documents and precedent studies. Unlined cheollik of Shin Gyeong-yu, meritorious retainer, were selected as main reference-relic because of various fabric, preserved conditions and definite shape. 'Baby doll' was selected as main model because of consumer preferences and awareness. Design sources from unlined cheollik in the early $17^{th}$ century were about a 1:2 ratio of upper and under parts, removable separated doori-somae, knife-shaped collar (outside), projected square collar (inside), long pleats line, side slit, traditional flat fell seam sewing. Trapezoidal side line, round waistline, and thin fabric were applied in designs because of toddler-body of doll model. Three designs were produced in step 1: Cheollik A focusing on the historical remake (traditional type), Cheollik B with belt and side slit (crossover type), and Cheollik C with back- opening (modern type). In step 2, interview with fashion major student was conducted to increase the utility of designs. As a result, modern trend sources (frill, velcro, round armhole line, slope of sleeves, and floral pattern) were reflected in Cheollik B, C. Finally, three doll cheollik and cheollik-styled doll apron sample were produced. Various versions must be suggested in the study of doll costume products with traditional sources that balance historical characteristics and practicality to improve customer satisfaction.
The purpose of this study is to develop a design prototype of outdoor-wear which is suitable for trekking. For achieving this purpose, 6 factors(bodice, sleeve, hood, pockets, opening, hem-line) considered for clothing function were selected, classified, and complemented based on the survey of literature and the research of 185 designs in 12 outdoor-wear brands. The results are as follows; The removable hood and 4DM sleeve style with the elastic band and velcro for the cuffs was the most preferred in the detail design on the brand research. And also the ventilation function and 1 or 2 diagonal in-seam pocket, covered zipper was preferred. Based on this result, two design prototypes of men's outdoor-wear for trekking were suggested; jacket 1 has a slim waist line and a hip length. Front opening has a zip and placket for windproof effect. There is a detachable hood with stopper around the head line. 4DM sleeve and elastic band inserted at the end of sleeve, so that prevent the hem-line raising. Two inseam pocket is placed slightly diagonal. Jacket 2 is a hood jacket with a york. The Jacket has a little roomier in waist and a hip length. Front opening is fastened by a waterproof zip. It has a 4DM sleeve and a princess line to make it placed two pocket which have ventilation functionality.
Journal of the Korean Society of Clothing and Textiles
/
v.34
no.9
/
pp.1470-1478
/
2010
This study investigates the suitability of outdoor wear among female trekkers in their twenties or thirties and provides data for developing outdoor wear more suitable for young females. Recently climbing has gained popularity as a leisure activity to enjoy the beauty of nature that increases physical and mental stamina. A survey was conducted on 304 female consumers in their twenties and thirties who enjoyed climbing in order to investigate the suitability of outdoor wear among young female consumers. The questionnaire covered the subjects' demographic information, duration and goal of climbing, purchase and suitability of outdoor wear, and preferred design for outdoor wear. As for the yearly situations, when they utilized outdoor wear, the biggest number of respondents chose "autumn" as the season for climbing. Most of the respondents were non-professional trekkers who enjoyed climbing as a hobby or for health. As for the size, the upper garment was 90 and 85 in the order, and the lower garment was 70 and 67 in the order. The pants were the most common item they owned, followed by round T-shirts, windbreaker jackets, zipup T-shirts, and waterproof jackets. They mentioned moisture absorption and dry fabric breathability as the basic functions required of outdoor wear. The subjects displayed a preference for partial details under the design category. They most preferred the hood-type jacket with a detachable stand collar, the sleeve hem with a partial rubber band and velcro strap, a T-shirt with a stand color and zipper, the waist fit with proper room, pants with a partial rubber band waist, and straight silhouette pants.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.