• 디지털융복합연구
• /
• 제13권4호
• /
• pp.205-210
• /
• 2015

자동차산업의 발전과 함께 M2M(Machine-to-Machine)통신이 자동차 산업분야에서 많은 관심이 되고 있다. M2M은 기상, 환경, 물류, 국방, 농.축산 등에서 사용하기 시작하여 장비들이 자동으로 상황에 맞추어 통신을 하고 상황에 맞는 동작을 함으로써 운영해가는 시스템이다. 자동차에서도 차량내부 장치 간, 차대 차, 차와 교통시설물, 차와 주변의 환경 등에 적용되고 있다. 그러나 통신시스템의 특성상 전송구간에서 공격자의 공격에 대한 문제가 있으며 자동차의 운행, 제어계통 및 엔진제어 등에 공격자의 공격이 진행되면 안전에 심각한 문제가 발생하게 된다. 따라서 디바이스 간 보안통신에 대한 연구가 활발히 진행되고 있다. 본 논문에서는 차량의 디바이스간 안전한 통신을 위해 해시함수 및 수학적 복잡한 공식을 이용하여 프로토콜을 설계하였으며 프로토콜 정형검증 도구인 Casper/FDR을 이용하여 실험하였으며 제안한 프로토콜이 각종 공격에 안전하게 동작되며 실제 적용할 때 효과적임을 확인하였다.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제47권6호
• /
• pp.432-437
• /
• 2021

Objectives: The mandible and other parts of the maxillofacial region suffer significant morbid injuries following road traffic accidents. Our study gives epidemiological description of mandibular fractures in Ghana and also evaluates the relevance of closed reduction and indirect fixation for managing mandibular fractures in low-resource health facilities in low-income countries like Ghana. Patients and Methods: This is a retrospective study involving 268 patients who reported to the Department of Oral and Maxillofacial Surgery of the Sunyani Regional Hospital with mandibular fractures from January 2010 to December 2019. Patient medical records were assessed for information on age, sex, fracture etiology, anatomic location of fracture, time of day of road traffic accident, and other associated injuries. Results: A total of 268 patients were included in this study (males, 216 [80.6%]; females, 52 [19.4%]). Motor vehicular accident (MVA) was the leading cause of mandibular fractures (202 injuries, 75.4%). Other etiologies included assault (39, 14.6%), gunshot (13, 4.9%), falls (12, 4.5%), and industrial accidents (2, 0.7%). Of the 161 male cases caused by MVA, 121 (75.2%) occurred at night and in the evening while the remaining 40 (24.8%) occurred in the morning and afternoon. Among all managed 222 patients, 212 (79.1%) were treated with closed reduction and indirect fixation technique while 10 (3.7%) were treated with open reduction and direct fixation. Conclusion: Closed reduction with indirect fixation could successfully be used to manage mandibular fractures in low resourced health facilities, especially in low-income countries. The poor lightening system on roads in Ghana is a major contributory factor to motor vehicular accidents.

• 한국정밀공학회지
• /
• 제32권6호
• /
• pp.529-536
• /
• 2015

A defect could be generated in bolts for a use of oil filters for the manufacturing process and then may affect to the safety and quality in bolts. Also, fine defects may be imbedded in oil filter system. So it is very important that such defects be investigated and screened during the multiple manufacturing processes. Therefore, in order effectively to evaluate the fine defects, the FEM simulations were performed to make characterization in the crack detection of the bolts and the parameters such as number of turns of the coil, the coil size, applied frequency were calculated based on the simulation results. Simulations were carried out for the defect signal of eddy current probe. Exciter and receiver were utilized. In this paper, the FEM simulations were performed in both bobbin-type and pancake-type probe, both probes were optimized under Eddy current FEM simulations and the results of calculation were discussed.

• 한국생산제조학회지
• /
• 제24권3호
• /
• pp.294-301
• /
• 2015

Oil filters for vehicular parts are used under high and low temperatures as the engine is cooled, and defects can be generated with repeated changes in the operating environment and with changes in the shape, such as very high internal losses for the bolts. Visually checking for defects inside a bolt is impossible. Nondestructive evaluation methods such as eddy current testing (ECT) are recommended as a more effective way to examine inside a bolt and detect surface defects in a short amount of time. In this study, the fit bobbin coil eddy current probe was applied to checking the bolts. The bolt parameters were calculated by using a COMSOL analysis program to obtain parameters for professional interior design and fault diagnosis.

• 한국산업융합학회 논문집
• /
• 제25권5호
• /
• pp.757-764
• /
• 2022

Recently the car tuning has become a trailblazing and creative culture that expresses the personality of the owner. In this paper, the "Car-Vatar", which is the compound word formed from the words "Car" and "Avatar", has been developed to investigate car tuning on the metaverse engineering platform. The Car-Vatar has been developed as a web-based vehicle dynamic simulation service for providing information about car tuning. That has been focused on investigating diverse vehicular performances, such as acceleration, braking, handling and fuel efficiency, according to the tuning vehicles and tuning parts on the virtual engineering platform. The Car-Vatar platform has provided two major services; one is real-time 3D tuning information system for the dress-up and performance-up tuning parts, the other is diverse vehicle dynamics system for the performance-up tuning parts. To check the validation of the Car-Vatar platform, the comparison between virtual simulation results and driving test results has been discussed on various driving environments.

• Journal of Mechanical Science and Technology
• /
• 제19권9호
• /
• pp.1742-1752
• /
• 2005

This paper presents a Multiple Target Tracking (MTT) Adaptive Cruise Control (ACC) system which consists of three parts; a multi-model-based multi-target state estimator, a primary vehicular target determination algorithm, and a single-target adaptive cruise control algorithm. Three motion models, which are validated using simulated and experimental data, are adopted to distinguish large lateral motions from longitudinally excited motions. The improvement in the state estimation performance when using three models is verified in target tracking simulations. However, the performance and safety benefits of a multi-model-based MTT-ACC system is investigated via simulations using real driving radar sensor data. The MTT-ACC system is tested under lane changing situations to examine how much the system performance is improved when multiple models are incorporated. Simulation results show system response that is more realistic and reflective of actual human driving behavior.

• 한국통신학회논문지
• /
• 제38C권2호
• /
• pp.165-171
• /
• 2013

차량 통신 프로토콜은 IEEE 802.11 WG과 P1609에서 진행하고 있는 WAVE(Wireless Access in Vehicular Environments)가 대표적이며, 보안 등을 제외한 MAC과 PHY에 대한 부분은 표준으로 제정되었다. 이러한 차량통신을 이용하여 운전자들의 안전과 전체 교통 흐름의 원활한 통제를 위해 국내외에서 많은 프로젝트가 진행되고 있다. 따라서 본 논문에서는 교차로에서 좌회전 시도 시에 위험 상황이 예상되면 운전자에게 알려주기 위한 차량간 통신 기반 안전서비스 알고리즘을 설계하였고, 이를 실제 구현하였다. 제안하는 알고리즘은 자차와 반대편에서의 접근차량에 대한 모델을 구성하고 충돌 위험이 있을 경우 운전자에게 HMI(Human Machine Interface)를 통해 경고를 주게 된다. 본 안전 서비스의 성능 테스트를 위해 테스트 차량을 이용하여 알고리즘을 시스템에 탑재하였으며, 테스트 케이스를 구성하여 성능 시험장에서 검증하였다. 테스트 결과로써, 우수한 성능을 나타냈으며, 앞으로 차량 통신 인프라가 설치된다면 V2I(Vehicle to Infrastructure) 통신을 이용하여 본 알고리즘을 보다 정밀하게 보완해야 할 것이다.

• 한국생산제조학회지
• /
• 제26권4호
• /
• pp.410-417
• /
• 2017

Hydro-forming is being employed increasingly to realize lightweight vehicular parts. The bumper beam produced by this process weighs 30% less than the conventional products with equal stiffness. However, hydro-forming involves complex parameters to obtain the target geometry and low residual stress. Parametric studies are conducted using finite element analysis to obtain optimized process conditions. Through these numerical approaches, the internal and holding pressures and feeder forward stroke along the extruded direction are optimized to achieve low residual stress and to minimize springback. The numerical results are verified by experimental observations made by employing a three-dimensional laser scanner. The numerical and experimental results are compared in terms of the springback. Both results show similar tendencies.

• 한국환경과학회지
• /
• 제30권3호
• /
• pp.219-234
• /
• 2021

Industrial emissions, mainly from industrial complexes, are important sources of ambient Volatile Organic Compounds (VOCs). Identification of the significant VOC sources from industrial complexes has practical significance for emission reduction. VOC samples were collected from July 2019 to June 2020. A Positive Matrix Factorization (PMF) receptor model was used to evaluate the VOC sources in the area. Four sources were identified by PMF analysis, including coating-1, coating-2, printing, and vehicle exhaust. The coating-1 source was revealed to have the highest contribution (41.5%), followed by coating-2 (23.9%), printing (23.1%), and vehicle exhaust (11.6%). The source showing the highest contribution was coating emissions, originating from the northwest to southwest of the sample site. It also relates to facilities that produce auto parts. The major components of VOC emissions from the coating facilities were toluene, m,p-xylene, ethylbenzene, o-xylene, and butyl acetate. Industrial emissions should be the top priority to meet the relevant control criteria, followed by vehicular emissions. This study provides a strategy for VOC source apportionment from an industrial complex, which is helpful in the development of targeted control strategies.