• Journal of Communications and Networks
• /
• 제15권2호
• /
• pp.122-131
• /
• 2013

We address the problem of effective vehicular routing in hostile scenarios where malicious nodes intend to jeopardize the delivery of messages. Compromised vehicles can severely affect the performance of the network by a number of attacks, such as selectively dropping messages, manipulating them on the fly, and the likes. One of the best performing solutions that has been used in static wireless sensor networks to deal with these attacks is based on the concept of watchdog nodes (also known as guard nodes) that collaborate to continue the forwarding of data packets in case a malicious behavior in a neighbor node is detected. In this work, we consider the beacon-less routing algorithm for vehicular environments routing protocol, which has been previously shown to perform very well in vehicular networks, and analyze whether a similar solution would be feasible for vehicular environments. Our simulation results in an urban scenario show that watchdog nodes are able to avoid up to a 50% of packet drops across different network densities and for different number of attackers, without introducing a significant increase in terms of control overhead. However, the overall performance of the routing protocol is still far from optimal. Thus, in the case of vehicular networks, watchdog nodes alone are not able to completely alleviate these security threats.

• 한국정보통신학회논문지
• /
• 제11권3호
• /
• pp.507-513
• /
• 2007

본 논문에서는 Certificateless 서명기법을 이용하여 Vehicular Ad-hoc 네트워크에서 공개키 인증서 관리 및 취소 문제를 다루지 않는 효율적인 인증 프로토콜을 제안한다. 또한, 빠르고 동적인 Vehicular Ad-hoc 네트워크의 노드(Vehicles)들의 특성을 고려하여 전통적인 공개키 구조에서의 인증서 취소 문제를 보다 효율적으로 해결하기위하여 구간 서명키 개념을 도입한다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권4호
• /
• pp.1223-1236
• /
• 2014

With the extension of wireless technology, vehicular ad hoc networks provide important services for the dissemination of general data and emergency warnings. However, since, the vehicle topology frequently changes from a dense to a sparse network depending on the speed of the moving vehicles and the time of day, vehicular ad hoc networks require a protocol that can facilitate the efficient and reliable dissemination of emergency messages in a highly mobile environment under dense or intermittent vehicular connectivity. Therefore, this paper proposes a new vehicular broadcast protocol, called BL-CAST, that can operate effectively in both dense and sparse network scenarios. As a low overhead multi-hop broadcast protocol, BL-CAST does not rely on the periodic exchange of beacons for updating location information. Instead, the location information of a vehicle is included in a broadcast message to identify the last rebroadcasting vehicle in an intermittently connected network. Simulation results show that BL-CAST outperforms the DV-CAST protocol in terms of the end-to-end delay, message delivery ratio and network overhead.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2008년도 정보통신설비 학술대회
• /
• pp.500-503
• /
• 2008

Vehicular Ad hoc Networks have attracted extensive attentions in recent years for their promises in improving safety and enabling other value-added services. Security and privacy are two integrated issues in the deployment of vehicular networks. Privacy-preserving authentication is a key technique in addressing these two issues. We propose a hash chain based authentication protocol that preserves the user privacy. We show that the our scheme can efficiently authenticate users. Name of Our protocol is

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2018년도 추계학술대회
• /
• pp.62-65
• /
• 2018

This paper comes out with the study on sensing data collection strategy in a Software-Defined Mobile Edge vehicular networking. The two cooperative data dissemination are Direct Vehicular cloud mode and edge cell trajectory prediction decision mode. In direct vehicular cloud, the vehicle observe its neighboring vehicles and sets up vehicular cloud for cooperative sensing data collection, the data collection output can be transmitted from vehicles participating in the cooperative sensing data collection computation to the vehicle on which the sensing data collection request originate through V2V communication. The vehicle on which computation originate will reassemble the computation out-put and send to the closest RSU. The SDMEVN (Software Defined Mobile Edge Vehicular Network) Controller determines how much effort the sensing data collection request requires and calculates the number of RSUs required to support coverage of one RSU to the other. We set up a simulation scenario based on realistic traffic and communication features and demonstrate the scalability of the proposed solution.

• International Journal of Computer Science & Network Security
• /
• 제22권9호
• /
• pp.376-388
• /
• 2022

The expansion of new applications and business models is being significantly fueled by the development of Fifth Generation (5G) networks, which are becoming more widely accessible. The creation of the newest intelligent vehicular networks and applications is made possible by the use of Vehicular Ad hoc Networks (VANETs) and Software Defined Networking (SDN). Researchers have been concentrating on the integration of SDN and VANET in recent years, and they have examined a variety of issues connected to the architecture, the advantages of software-defined VANET services, and the new features that can be added to them. However, the overall architecture's security and robustness are still in doubt and have received little attention. Furthermore, new security threats and vulnerabilities are brought about by the deployment and integration of novel entities and a number of architectural components. In this study, we comprehensively examine the good and negative effects of the most recent SDN-enabled vehicular network topologies, focusing on security and privacy. We examine various security flaws and attacks based on the existing SDVN architecture. Finally, a thorough discussion of the unresolved concerns and potential future study directions is provided.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권7호
• /
• pp.3369-3385
• /
• 2019

There are various research challenges in vehicular ad hoc networks (VANETs) that need to be focused until an extensive deployment of it becomes conceivable. Design and development of a scalable routing algorithm for VANETs is one of the critical issue due to frequent path disruptions caused by the vehicle's mobility. This study aims to provide a novel road-aware routing protocol for vehicular networks named as Two-level hierarchical Hybrid Road-Aware (THERA) routing for vehicular ad hoc networks. The proposed protocol is designed explicitly for inter-vehicle communication. In THERA, roads are distributed into non-overlapping road segments to reduce the routing overhead. Unlike other protocols, discovery process does not flood the network with packet broadcasts. Instead, THERA uses the concept of Gateway Vehicles (GV) for the discovery process. In addition, a route between source and destination is flexible to changing topology, as THERA only requires road segment ID and destination ID for the communication. Furthermore, Road-Aware routing reduces the traffic congestion, bypasses the single point of failure, and facilitates the network management. Finally yet importantly, this paper also proposes a probabilistical model to estimate a path duration for each road segment using the highway mobility model. The flexibility of the proposed protocol is evaluated by performing extensive simulations in NS3. We have used SUMO simulator to generate real time vehicular traffic on the roads of Gangnam, South Korea. Comparative analysis of the results confirm that routing overhead for maintaining the network topology is smaller than few previously proposed routing algorithms.

• Journal of information and communication convergence engineering
• /
• 제12권1호
• /
• pp.26-32
• /
• 2014

Vehicular-to-anything (V2X) technology is attractive for wireless vehicular ad-hoc networks (VANETs) because it allows for opportunistic choice of a vehicular protocol between vehicular-to-vehicular (V2V) and vehicular-to-infrastructure (V2I) communications. In particular, achieving seamless connectivity in a VANET with nearby network infrastructure is challenging. In this paper, we propose a density-based opportunistic broadcasting (DOB) protocol, in which opportunistic connectivity is carried out by using the nearby infrastructure and opposite vehicles for solving the problems of disconnection and long end-to-end delay times. The performance evaluation results indicate that the proposed DOB protocol outperforms the considered comparative conventional schemes, i.e., the shortest path protocol and standard mobile WiMAX, in terms of the average end-to-end delay, packet delivery ratio, handover latency, and number of lost packets.

• 정보와 통신
• /
• 제29권8호
• /
• pp.72-84
• /
• 2012

This paper introduces three vehicle trajectory-based data forwarding schemes, tailored for vehicular ad hoc networks. Nowadays GPS-based navigation systems are popularly used for providing efficient driving paths for drivers. With the driving paths called vehicle trajectories, we can make data forwarding schemes more efficient, considering the micro-scoped mobility of individual vehicles in road networks as well as the macro-scoped mobility of vehicular traffic statistics. This paper shows why the vehicle trajectory is a key ingredient in the design of the vehicle-to-infrastructure, infrastructure-to-vehicle, and vehicle-to-vehicle data forwarding schemes over multihop. Through the mathematical formulation, the key design techniques are shown for three forwarding schemes based on vehicle trajectory, compared with a state-of- the- art data forwarding scheme based on only vehicular traffic statistics.

• 한국통신학회논문지
• /
• 제35권9A호
• /
• pp.882-888
• /
• 2010

Vehicular Ad-Hoc Networks (VANETs) using inter-vehicle communication can potentially enhance traffic safety and facilitate many vehicular applications. Therefore, this paper proposes an inter-vehicle routing protocol called Junction-Assisted Routing (JAR) that uses fixed junction nodes to create the routing paths for VANETs in city environments. JAR is a proactive routing protocol that uses the Expected Transmission Count (ETC) for the road segment between two neighbor junctions as the routing paths between junction nodes. Simulation results showed that the proposed JAR protocol could outperform existing routing protocols in terms of the packet delivery ratio and average packet delay.