• IEMEK Journal of Embedded Systems and Applications
• /
• v.11 no.1
• /
• pp.29-37
• /
• 2016

We propose vehicular spread spectrum (SS) radar robust to mutual interference using zero correlation zone (ZCZ) code. SS radar schemes have been employed for vehicular radar systems due to their outstanding correlation property. However, this superiority is based on a premise that timing among codes is completely synchronized. In the practical driving environment, timing mismatch among radar signals is inevitable because the radar signals of several vehicles are independently transmitted at each different location and each timing and thus each radar signal is received at different timing. This timing offset is the main cause of orthogonality destruction among codes and thus radar signals from other vehicles become mutual interference. In order to solve this problem, we find out the new property of ZCZ code which maintains the complete orthogonality except to timing offset corresponding to chips (pulses) of multiple of 4 and employ ZCZ code to SS radar systems. Simulation results show the proposed scheme achieve better performance compared with the conventional SS radar scheme using pseudo code or gold code.

• International Journal of Highway Engineering
• /
• v.18 no.5
• /
• pp.117-125
• /
• 2016

PURPOSES : The density in uninterrupted traffic flow facilities plays an important role in representing the current status of traffic flow. For example, the density is used for the primary measures of effectiveness in the capacity analysis for freeway facilities. Therefore, the estimation of density has been a long and tough task for traffic engineers for a long time. This study was initiated to evaluate the performance of density values that were estimated using VDS data and two traditional methods, including a method using traffic flow theory and another method using occupancy by comparing the density values estimated using vehicular trajectory data generated from a radar detector. METHODS : In this study, a radar detector which can generate very accurate vehicular trajectory within the range of 250 m on the Joongbu expressway near to Dongseoul tollgate, where two VDS were already installed. The first task was to estimate densities using different data and methods. Thus, the density values were estimated using two traditional methods and the VDS data on the Joongbu expressway. The density values were compared with those estimated using the vehicular trajectory data in order to evaluate the quality of density estimation. Then, the relationship between the space mean speed and density were drawn using two sets of densities and speeds based on the VDS data and one set of those using the radar detector data. CONCLUSIONS : As a result, the three sets of density showed minor differences when the density values were under 20 vehicles per km per lane. However, as the density values become greater than 20 vehicles per km per lane, the three methods showed a significant difference among on another. The density using the vehicular trajectory data showed the lowest values in general. Based on the in-depth study, it was found out that the space mean speed plays a critical role in the calculation of density. The speed estimated from the VDS data was higher than that from the radar detector. In order to validate the difference in the speed data, the traffic flow models using the relationships between the space mean speed and the density were carefully examined in this study. Conclusively, the traffic flow models generated using the radar data seems to be more realistic.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.11
• /
• pp.2252-2260
• /
• 2015

In this paper, we propose a vehicular cooperative navigation system using GNSS, vision sensor and radar sensor that are frequently used in mass-produced cars. The proposed cooperative vehicular navigation system is a variant of the Hybrid-Sum Product Algorithm over Wireless Network (H-SPAWN), where we use vision and radar sensors instead of radio ranging(i.e.,UWB). The performance is compared and analyzed with respect to the sensors, especially the position estimation error decreased about fifty percent when using radar compared to vision and radio ranging. In conclusion, the proposed system with these popular sensors can improve position accuracy compared to conventional cooperative navigation system(i.e.,H-SPAWN) and decrease implementation costs.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.1B
• /
• pp.62-70
• /
• 2000

Intelligent vehicles are equipped with radar sensors for collision avoidance. We present a method of suppressing mutual interference among pulse-type radars, where all the radars are standardized. We developed a method of separating the true self-reflection from the false one by controlling the pulse emission of a radar in anorhogonal ON, OFF pattern. Interference signal identified in OFF-intervals is recorded to indicate the positions of the expected ghosts in ON-intervals. PFA and PM are derived for a radar system with I-Q demodulation scheme, where Gaussian noise alone is Rayleigh-distributed and Gaussian noise plus reflected radar pulse are Rician-distributed. The value of the threshold adaptively updated in order to prevent the deterioration of PM. In the experimental result, PFA decreases by an order of 10,000, when compared with the conventional M of N majority voting method.

• Journal of Mechanical Science and Technology
• /
• v.19 no.9
• /
• pp.1742-1752
• /
• 2005

This paper presents a Multiple Target Tracking (MTT) Adaptive Cruise Control (ACC) system which consists of three parts; a multi-model-based multi-target state estimator, a primary vehicular target determination algorithm, and a single-target adaptive cruise control algorithm. Three motion models, which are validated using simulated and experimental data, are adopted to distinguish large lateral motions from longitudinally excited motions. The improvement in the state estimation performance when using three models is verified in target tracking simulations. However, the performance and safety benefits of a multi-model-based MTT-ACC system is investigated via simulations using real driving radar sensor data. The MTT-ACC system is tested under lane changing situations to examine how much the system performance is improved when multiple models are incorporated. Simulation results show system response that is more realistic and reflective of actual human driving behavior.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.1
• /
• pp.73-82
• /
• 1997

This paper discusses the design and implementation of parabola, lens, and $32{\times}8$ rectangular microstrip patch array antennas at 77GHz for vehicular radar applications. The parabola size was $7{\times}10$ cm and the f/D was 0.263. Open waveguide(WR-12) was utilized as the feed antenna. Two types of lens antennas with f/D=0.5 were investigated ; one was a plano-convex and the other was a double-convex. A patch array antenna was designed using a transmission line model and experimented. Comparing the theoretical values with the measured ones for four antennas, the results were agreed well in 3 dB BW and radiation patterns, while the gain of the patch array antenna was degraded as much as -25 dB due to the feed network and microstrip-to-coax-to-waveguide transition losses.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.2
• /
• pp.49-56
• /
• 2011

One of the most important VANET applications is providing active safety by broadcasting emergency messages. In order to prevent broadcast storm of flooding-based broadcasting scheme in which any node receiving message will rebroadcast, the existing protocols use the different methods to limit the number of relay nodes. Nevertheless, the existing protocols have low delivery ratio with high traffic density and cause message overhead. Currently, the dramatic increase in the number of vehicles equipped with Global Positioning System (GPS) and onboard radar created new application scenarios that were not feasible before. Consequently, we proposed a broadcasting protocol that selects relay node by using GPS-based position information and detecting neighboring vehicles with the help of onboard radar to. Simulation results show that our proposed protocol has better performance than the existing schemes.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.1
• /
• pp.28-42
• /
• 2013

Personal Rapid Transit(PRT) is a new unmanned transportation system using electricity. The purpose of the PRT is relieving the congestion of city traffic and connecting between inner city and airport, high-speed railroad. PRT requires to develop devices for the guarantee of safety and reliability. PRT as the mean of rail transportation must be equipped with control system for front rail sensing. Ultra Wide Band(UWB) radar system is suitable for PRT's detection because it has the advantage of low power consumption, low interference and high resolution. In this paper, an improved adaptive Constant False Alarm Rate(CFAR) algorithm is proposed and studied in various noise environments. The proposed algorithm improves performance in various noise environments compared to the Mean Level CFAR algorithms and other adaptive CFAR algorithms.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.9
• /
• pp.53-63
• /
• 1994

In indoor radio systems, vehicular communication systems, and land mobile systems, a very important problem is that of maintaining stable communications at all locations. Therefore solutions for the indoor propagation problem are important aspects of the mobile communication system. leaky coxial cables are finding increasing use in communications systesm involving mines, tunnels, tailroads, and highways, and in new obstacle detection, or guided radar, schemes for ground transportation and perimenter surveilance. In this paper a leaky coaxial cable having periodic slots in the outer conductor is described to obtain the propagation modes in the various environments. We use aneccentric cylindrical model to develop the theory for surface-wave propagation on the cable. Numerical Results are also included for the propagation constants, field distribution and current distribution. First, we derive the electromagnetic equation for leaky coaxial cable having symmetrical periodic slots using mode-matching method and Floquet's theorem, and then find various modes, propagation constants, field distribution, etc.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.25 no.2
• /
• pp.186-190
• /
• 2015

Intelligent vehicle plans motion and navigate itself based on the surrounding environment perception. Hence, the precise environment recognition is an essential part of self-driving vehicle. There exist many vulnerable road users (e.g. vehicle, pedestrians) on vehicular driving environment, the vehicle must percept all the dynamic obstacles accurately for safety. In this paper, we propose an multiple vehicle tracking algorithm using microwave radar. Our proposed system includes various special features. First, exceptional radar measurement model for vehicle, concentrated on the corner, is described by mixture density network (MDN), and applied to particle filter weighting. Also, to conquer the curse of dimensionality of particle filter and estimate the time-varying number of multi-target states, reversible jump markov chain monte carlo (RJMCMC) is used to sampling step of the proposed algorithm. The robustness of the proposed algorithm is demonstrated through several computer simulations.