• Journal of Korean Society for Atmospheric Environment
• /
• v.22 no.5
• /
• pp.574-589
• /
• 2006

Although concentrations of hazardous air pollutants(HAPs) are very low in the atmosphere, a growing attention has been paid on such compounds due to their high toxicity and bioaccumulation potentials into human body. In order to control and manage the amount of these materials in ambient air, it is necessary to construct monitoring system of them and to know the current concentration level of HAPs above all. In this work, a wide range of HAPs has been measured in metropolitan area to recognize the present state of HAPs in this area. The measured concentration of VOCs was higher in order of Jeonnongdong, Jeongdong, and Yangsuri. The regional difference of VOCs concentration was also highest in spring. Its total VOCs was ranged from $15.17{\sim}41.45$ ppb. Benzene $0.43{\sim}2.32$ ppb showed similar concentration level with the result of previous researches in Seoul. This value is a little higher than the average concentration 0.92 ppb for national ambient air quality standards in Japan. The concentration of aldehydes in this study was lower than those of other researches. Previous works in Seoul metropolitan area showed that the concentration of formaldehyde and acetaldehyde were higher than 5 ppb. The concentration of gaseous and particulate PAHs was high in order of winter, spring, and summer More than 90% of PAHs with low molecular weight such as 2-rings and 3-rings PAHs existed in gas phase. On the other hands, PAHs with high molecular weight more than 5-rings PAHs almost existed in particulate. In spring, the concentration of gaseous PAHs was 24.38 $ng/m^3$ in Jeongdong. Among the particulate PAHs, the concentrations of Naphthalene, Benzo(b)fluoranthene, and Benzo(g, h, i)perylene were higher than others. Especially, the concentration of Benzo(a)pyrene, a important carcinogenic pollutant, was highest in winter 0.5 $ng/m^3$ and ranged from 0.03 to 0.3 $ng/m^3$ in spring and summer, which is lower than the monitoring result in 90's. These components were mainly originated from the vehicle exhaust or heating equipment use.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.22 no.1
• /
• pp.58-66
• /
• 2010

In this paper, we have constructed high-resolution topographical map of macro-tidal Malipo beach through integration of terrestrial LiDAR measurement and MBES survey data at inter-tidal zone. To acquire the enough information of inter-tidal zone, we have done terrestrial LiDAR measurement mounted on the roof of vehicle with DGPS through go-stop-scan method at the ebb tide and MBES depth surveying with tide gauge and eye staff measurement for tide correction and MSL calculation at the high tide all together. To integrate two kinds of data, we have unified the vertical coordination standard to Incheon MSL. The mean error of overlapped inter-tidal zone is about 2~6 cm. To verify the accuracy of terrestrial LiDAR, RTK-DGPS measurement have done simultaneously and the difference of Z value RMSE is about 4~7 cm. The resolution of Malipo topographical map is 50 cm and it has constructed to DEM (Digital Elevation Model) based on GIS. Now it has used as an input topography information for the storm-surge inundation prediction models. Also it will be possible to use monitoring of beach process through the long-term periodic measurement and GIS-based 3D spatial analysis calculating the erosion and deposition considering with the artificial beach transition and coastal environmental parameters.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1995.10a
• /
• pp.15.2-22
• /
• 1995

Evaluating stiffness of near-surface materials has been one of the critically important tasks in many civil engineering works. It is the main goal of geotechnical characterization. The so-called deflection-response method evaluates the stiffness by measuring stress-strain behavior of the materials caused by static or dynamic load. This method, however, evaluates the overall stiffness and the stiffness variation with depth cannot be obtained. Furthermore, evaluation of a large-area geotechnical site by this method can be time-consuming, expensive, and damaging to many surface points of the site. Wave-propagation method, on the other hand, measures seismic velocities at different depths and stiffness profile (stiffness change with depth) can be obtained from the measured velocity data. The stiffness profile is often expressed by shear-wave (S-wave) velocity change with depth because S-wave velocity is proportional to the shear modulus. that is a direct indicator of stiffiiess. The crosshole and downhole method measures the seismic velocity by placing sources and receivers (geophones) at different depths in a borehole. Requirement of borehole installation makes this method also time-consuming, expensive, and damaging to the sites. Spectral-Analysis-of-Surface-Waves (SASW) method places both source and receivers at the surface, and records horizontally-propagating surface waves. Based upon the theory of surfacewave dispersion, the seismic velocities at different depths are calculated by analyzing the recorded surface-wave data. This method can be nondestructive to the sites. However, because only two receivers are used, the method requires multiple measurements with different field setups and, therefore, the method often becomes time-consuming and labor-intensive. Furthermore. the inclusion of noise wavefields cannot be handled properly, and this may cause the results by this method inaccurate. When multi-channel recording method is employed during the measurement of surface-waves, there are several benefits. First, usually single measurement is enough because multiple number (twelve or more) of receivers are used. Second, noise inclusion can be detected by coherency checking on the multi-channel data and handled properly so that it does not decrease the accuracy of the result. Third, various kinds of multi-channel processing techniques can be applied to f1lter unwanted noise wavefields and also to analyze the surface-wavefields more accurately and efficiently. In this way, the accuracy of the result by the method can be significantly improved. Fourth, the entire system of source, receivers, and recording-processing device can be tied into one unit, and the unit can be pulled by a small vehicle, making the survey speed very fast. In all these senses, multi-channel recording of surface waves is best suited for a routine method for geotechnical characterization in most of civil engineering works.

• Ocean and Polar Research
• /
• v.42 no.1
• /
• pp.49-61
• /
• 2020

We analyzed the morphological characteristics of OCC (Ocean Core Complexes) in the middle part of the Central Indian Ridge (MCIR) using high-resolution geophysical data recorded on the Deep-Tow SideScan Sonar IMI-30 system. In terms of slope-gradient variations calculated from the high-resolution bathymetry data, the normal faults formed by seafloor spreading were associated generally with slopes > 30° and resulted in high backscatter intensities, which reflect more topographic effects than acoustic medium variation. However, the areas associated with gentle slopes < 10° tend to show the backscatter intensities reflecting the acoustic characteristic of the medium. We show that the detachment faults exposing the OCCs were initiated with high-angle normal faults (58°) exhibiting outward and inward dips of a breakaway zone. In order to examine the spatial distribution of OCC structures, we characterized the transition from magmatic-dominant seafloor with abyssal hills to tectonic-dominant seafloor with OCC using the down-slope direction variation. The slope direction of the seafloor generally tends to be perpendicular to the ridge azimuth in the magmatic-dominant zone, whereas it becomes parallel to the given ridge azimuth near the OCC structures. Therefore, this spatial change of seafloor slope directions indicates that the formation of OCC structures is causally associated with the tectonic-dominant spreading rather than magmatic extension. These results also suggest that the topographical characteristics of seafloor spreading and OCC structures can be distinguished using high-resolution geophysical data. Thus, we propose that the high-resolution bathymetry and backscatter intensity data can help select potential areas of exploitation of hydrothermal deposits in MCIR effectively.

• The Journal of Sustainable Design and Educational Environment Research
• /
• v.14 no.2
• /
• pp.26-36
• /
• 2015

The new town was assumed that there is a difference between the country's elementary school environment. First, given the important elements of the school safety plan in order to verify this, and we plan to set up each of these elements by safety criteria. In the second chapter in order to achieve the objective of this study was to develop indicators to evaluate the safety of the school environment influences the safety of the school environment through the theoretical consideration. In Chapter 3, the difference in safety through the new elementary school survey of metropolitan areas was given a score per item per item depending on the evaluation criteria. The fourth section is the difference between safety school environment can be summarized as the following analytical results that the difference between the new city. The results of this study as follows: First, the characteristics of the elementary school environment showed a significant difference between the new town. Second, school location, terrain characteristics, bike paths and pedestrian to the installation, the safety of landscape installations, installing median barriers, traffic safety facilities, speed bumps, separation of pedestrian and vehicle circulation in the front door, scores of elements of the plan such as parking scheme there is a difference between the new town. Third, the introduction of elements of the plan such as Traffic calming or Traffic Island installation techniques was found lacking.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.14 no.6
• /
• pp.77-90
• /
• 2015

An increasing number of vehicles is causing various traffic problems such as chronic congestion of highways and air pollution. Local governments have been managing traffic by constructing systems such as Intelligent Transport Systems (ITS) and Advanced Traffic Management Systems (ATMS) to relieve such problems, but construction of an infrastructure-based traffic system is insufficient in resolving chronic traffic problems. A more sophisticated system with enhanced operational management capabilities added to the existing facilities is necessary at this point. As traffic patterns of the urban traffic flow is time-specific due to the different vehicle populations throughout the time of the day, a local network-wide signal operation plan that can manage such situation-specific traffic patterns is deemed to be necessary. Therefore, this study is conducted for the purpose of establishment of a plan for contextual signal control management through signal optimization at the network level after setting the Frame Signal in accordance to the traffic patterns gathered from the short-term traffic forecast data as a means to mitigate the problems with existing standardized signal operations.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.5
• /
• pp.119-137
• /
• 2020

Over the last two decades, the attitudes to cars have changed from buying a car to sharing a car, especially among young people. Shared transport services and autonomous vehicles together can resolve the accessibility issue of shared transport services. Furthermore, they will make it possible to develop a new model of apartments without car parking. Therefore, the study estimated the demand for car sharing by young people and the running efficiency of car-sharing dealing with their car-based trip demand. The study chose nine apartment complexes for study sites where a majority of the residents were young people. The questionnaire survey was conducted to collect data on the trip demands of young people. The results showed that there are significant differences in the car-sharing use patterns and demand between the apartment houses located in the Capital region and non-capital region. Young people living in apartments in the Capital region used car sharing once per day per person for approximately 80 minutes per trip and tended to hire that between 8 AM and 10 AM. On the other hand, the young people living in apartments in the non-capital region used car sharing twice per day per person for approximately 200 minutes per trip. They tended to hire that frequently in the afternoon and evening as well as in the morning. The results also showed that a single car-sharing vehicle could deal with 3~4 trips per day in the Capital region and around 2 trips per day in the non-capital region.

• Journal of Digital Convergence
• /
• v.14 no.12
• /
• pp.73-84
• /
• 2016

The purpose of this study is to examine the global value chain of the global automotive industry to investigate the success factors through the example of the value chain of Hyundai Motor. It looks at the value chain of the well-known Korean automaker, Hyundai Motor, to find success factors with cases. It examines the process to build the supply chain of Hyundai Motor to analyze what impact it has on the growth of Hyundai Motor to look closely at the vertical division of labor of vehicle parts manufacturers. Korea's automobile industry has been expanding cooperation between two sectors as a multifunctional promotion focusing on electronic communications technology in machinery and technology center. Through introducing the nation's first vertical integration in the sector, Hyundai Motor has secured competitiveness of cost reduction and prestige car production. Hyundai Motor has operated and established factories in the United States, India, Turkey, the Czech Republic, Russia, and Brazil. Hyundai Motor operates 51 affiliates, such as Hyundai Mobis, by restructuring, mergers and acquisitions, and building their own vertical division of labor around it. Hyundai Motor has been overcoming dependence on foreign modules businesses and maintaining the supply value chain around Hyundai Mobis.

• Child Health Nursing Research
• /
• v.9 no.1
• /
• pp.9-17
• /
• 2003

Families of children with cancer face many illness-related demands. The perceived social support is a critical resource for the family adaptation process. And the patterns of family adaptation to childhood cancer varies as characteristics of disease, which is prognosis, the influence of cognition function, and treatment process. The conceptual definition of social support is not unidimensional. However, most studies focus on general aspect of mediating effects on adaptation. Diverse dimensions of perceived social support should be considered in its effectiveness for intervention. Therefore, this study was undertaken to determine whether family's perceived social support influences the family adaptation of family with pediatric cancer and what dimension influences mostly in family adaptation as the characteristics of disease in the family of children with cancer. The subject was consisted of 102 families with pediatric cancer who had been diagnosed as leukemia or brain tumor last 2 years. Those families had participated in the education program or meetings for family who have with pediatric cancer children. The measurement for this study were Personal Resource Questionnaire (PRQ) Part-Ⅱ developed by Brandt and Weinert to measure parents' perceived social support, and the McCubbin's Coping Health Inventory for Parents (CHIP) to measure family coping. The results of this study can be summarized as follows; Regression analysis showed that perceived social support has effect on family adaptation with β=.43, p<.01. In the group of family of child with leukemia, social support as general has effect on adaptation (β=.40, p<.01) and specially, social support perceived as intimacy was strongly effect on family adaptation. And In the group of brain tumor, Social support has effect on adaptation(β=.46, p<.01) and among the social support domains, the self esteem dimension was most predictable to family adaptation. In conclusion, the perceived social support is a predictor on family adaptation and useful vehicle to help family who has child with pediatric cancer. An important clinical implication is that specified support program for intervention may be useful and critical for the family who has diverse pediatric conditions of childhood cancer. Further studies should stress the effects of family support for clinical intervention and is needed with diverse stage of development and pediatric conditions.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.10
• /
• pp.109-119
• /
• 2013

An unmanned ground vehicle(UGV) today plays a significant role in both civilian and military areas. Predominantly these systems are used to replace humans in hazardous situations. To take unmanned ground vehicles systems to the next level and increase their capabilities and the range of missions they are able to perform in the combat field, new technologies are needed in the area of command and control. For this reason, we present war field simulator based on information fusion technology to efficiently control UGV. In this paper, we present the war field simulator which is made of critical components, that is, simulation controller, virtual image viewer, and remote control device to efficiently control UGV in the future combat fields. In our information fusion technology, improved methods of target detection, recognition, and location are proposed. In addition, time reduction method of target detection is also proposed. In the consequence of the operation test, we expect that our war field simulator based on information fusion technology plays an important role in the future military operation significantly.