• 제목/요약/키워드: Vehicle-to-Home

검색결과 132건 처리시간 0.032초

저가형 전기자동차 충전기를 위한 충전 알고리즘 개발 (Development of Charging Algorithm for the Low Cost EV Charger)

  • 박대수;김태경;오성철
    • 한국산학기술학회논문지
    • /
    • 제17권2호
    • /
    • pp.590-595
    • /
    • 2016
  • 최근 미국은 전기자동차에 대한 보조금을 30%이상 인상하는 방안을 추진하고 있고, 유럽 각국도 2020년까지 100만대, 2030년까지 600만대의 전기자동차를 보급할 계획인 독일을 중심으로 보급과 개발 정책을 확대하고 있다. 전기자동차 개발을 단순한 기술적인 트렌드가 아닌, 장기적인 에너지 안보와 전체 사회 시스템을 변화시킬 수 있는 가능성 측면에서 접근하고 있기 때문이다.[1] 국내 또한 전기자동차 보급 목표가 증가하고 경쟁이 심화됨에 따라 신규 블루 오션 시장으로 급부상하고 있다. 현재 완속 충전기(Home Charger)의 경우 국내에서는 2015년부터 정부 지원 설치가 중단될 계획인데, 전기자동차의 보급에 최대 장애 요인 중 하나인 충전 인프라 부족을 최적화 된 저가형 Home Charger 개발로 전기자동차 민간 보급 조기 활성화에 기여하고자 한다. 본 논문에서는 IEC 61851-1과 IEC 61851-22 규격을 분석하여 저가형 충전기의 심야전력 알고리즘을 개발하였으며, 완속 충전기의 가격 저감과 편리성을 위해 기존의 충전기 시스템에 ATmega128, Bluetooth 모듈의 추가 구성을 통한 UI의 LCD 패널을 스마트폰 어플로 변경하였다.

로터리 댐퍼의 토오크 특성에 관한 연구 (A Study on the Torque Characteristics of Rotary Dampers)

  • 이춘태
    • 드라이브 ㆍ 컨트롤
    • /
    • 제16권4호
    • /
    • pp.87-92
    • /
    • 2019
  • Rotary dampers are damping devices which provide high resistance to shaft rotation. Rotary dampers are being used in various areas to enable the gentle opening and closing of the rotation motion relative to home furniture, industry machinery and automotive parts. Rotary dampers can be installed directly at the rotating point of a various part and can achieve uniform, gentle movement which increases quality and value of products. And generally, the silicone fluid is used as the damping medium because of its stable viscous properties. The movement of these little decelerators can be achieved with a high viscosity of working fluid and throttles installed in the body of the rotary damper. The damping force can be achieved clockwise, anti-clockwise or in both directions according to the structure of the orifices or throttles. In this paper, the torque performances of the rotary damper containing air in the working fluid were studied. For this purpose, the torque characteristic of the rotary damper according to the variation of various operating conditions such as clearance of leakage, dimensions of groove orifice, content ratio of air, etc., were simulated with AMEsim software.

Analytical Approach of Multicasting-supported Inter-Domain Mobility Management in Sensor-based Fast Proxy Mobile IPv6 Networks

  • Jang, Ha-Na;Jeong, Jong-Pil
    • International journal of advanced smart convergence
    • /
    • 제1권2호
    • /
    • pp.1-11
    • /
    • 2012
  • IP-based Wireless Sensor Networks (IP-WSNs) are gaining importance for their broad range of applications in health care, home automation, environmental monitoring, industrial control, vehicle telematics, and agricultural monitoring. In all these applications, a fundamental issue is the mobility in the sensor network, particularly with regards to energy efficiency. Because of the energy inefficiency of network-based mobility management protocols, they can be supported via IP-WSNs. In this paper, we propose a network-based mobility-supported IP-WSN protocol called mSFP, or the mSFP: "Multicasting-supported Inter-Domain Mobility Management Scheme in Sensor-based Fast Proxy Mobile IPv6 Networks". Based on [8,20], we present its network architecture and evaluate its performance by considering the signaling and mobility cost. Our analysis shows that the proposed scheme reduces the signaling cost, total cost, and mobility cost. With respect to the number of IP-WSN nodes, the proposed scheme reduces the signaling cost by 7% and the total cost by 3%. With respect to the number of hops, the proposed scheme reduces the signaling cost by 6.9%, the total cost by 2.5%, and the mobility cost by 1.5%. With respect to the number of IP-WSN nodes, the proposed scheme reduces the mobility cost by 1.6%.

자율주행자동차 R&D 동향분석과 논리모형 개발에 대한 연구 (A Study on the Analysis of R&D Trends and the Development of Logic Models for Autonomous Vehicles)

  • 김길래
    • 디지털융복합연구
    • /
    • 제19권5호
    • /
    • pp.31-39
    • /
    • 2021
  • 본 연구는 국내외 자율주행자동차 연구개발과정에서 나타나고 있는 다양한 이슈를 파악하기 위해 자율주행자동차 연구개발 관련 영문 뉴스 기사 1,870개를 수집하고 데이터 전처리 과정을 거쳐 토픽 모델링을 수행하였다. 토픽모델링 결과 20개의 토픽을 추출하였으며, 토픽에 대한 명명작업을 수행하고 의미를 해석하였다. 도출된 토픽을 투입, 활동, 산출, 성과의 연구개발과정에 대응시켜 자율주행자동차 연구개발사업 논리모형을 제시하였다. 본 연구의 분석결과는 국내외 자율주행자동차 연구개발사업의 추진 상황을 정확하게 판단하고 빠르게 변화하고 있는 기술개발에 대비할 수 있는 기초자료로 활용할 수 있을 것이다.

Scalability Analysis of Cost Essence for a HA entity in Diff-FH NEMO Scheme

  • Hussein, Loay F.;Abass, Islam Abdalla Mohamed;Aissa, Anis Ben
    • International Journal of Computer Science & Network Security
    • /
    • 제22권3호
    • /
    • pp.236-244
    • /
    • 2022
  • Network Mobility Basic Support (NEMO BS) protocol has been accredited and approved by Internet Engineering Task Force (IETF) working group for mobility of sub-networks. Trains, aircrafts and buses are three examples of typical applications for this protocol. The NEMO BS protocol was designed to offer Internet access for a group of passengers in a roaming vehicle in an adequate fashion. Furthermore, in NEMO BS protocol, specific gateways referred to Mobile Routers (MRs) are responsible for carrying out the mobility management operations. Unfortunately, the main limitations of this basic solution are pinball suboptimal routing, excessive signaling cost, scalability, packet delivery overhead and handoff latency. In order to tackle shortcomings of triangular routing and Quality of Service (QoS) deterioration, the proposed scheme (Diff-FH NEMO) has previously evolved for end-users in moving network. In this sense, the article focuses on an exhaustive analytic evaluation at Home Agent (HA) entity of the proposed solutions. An investigation has been conducted on the signaling costs to assess the performance of the proposed scheme (Diff-FH NEMO) in comparison with the standard NEMO BS protocol and MIPv6 based Route Optimization (MIRON) scheme. The obtained results demonstrate that, the proposed scheme (Diff-FH NEMO) significantly improves the signaling cost at the HA entity in terms of the subnet residence time, number of mobile nodes, the number of DMRs, the number of LFNs and the number of CNs.

농촌 다목적 모듈형 전기차 개발에 관한 연구 (A Study on the Development of Modular Design for Multi-purpose Electric Motor Vehicles in Rural Areas)

  • 권성자;김명수;이봉주
    • 한국융합학회논문지
    • /
    • 제11권6호
    • /
    • pp.173-182
    • /
    • 2020
  • 우리나라는 2000년 이후 EU의 지구온난화에 따른 환경 규제 강화, 고유가 추세 그리고 농촌 인구분포의 고령화 등에 따라 친환경에너지를 기반으로 하는 농촌 소상공인을 위한 다목적 전기차에 대한 니즈 강화가 시장의 큰 흐름이 되고 있다. 농촌 소상공인을 위한 다목적 전기차는 적은 비용으로 유지가 가능하고 친환경 에너지의 활성화를 통한 온실 가스를 감축할 뿐 아니라 고령화 되어가고 있는 농업 종사자의 노동 강도를 줄이고 야간작업 및 물류 운반을 위하여 매우 혁신적인 운송수단이 될 것이다. 본 논문에서는 친환경 에너지 정책 시행과 함께 영세 규모의 농촌 소상공인들이 비포장도로와 웅덩이가 많은 농로환경에서 쉽게 운행할 수 있고, 농작물 운반 시 노동 강도를 줄일 수 있으며, 사고 시에도 저렴한 비용으로 간단하게 부품을 교체할 수 있는 농촌 다목적 모듈형 전기차를 제안하기 위하여 기존 문헌들을 고찰하고 국내외 전기차를 벤치마킹하여 12개의 모듈형 부품을 제시한다. 본 논문은 모듈형 전기차의 산업계는 물론 디자인계의 연구에 도움이 될 것으로 사료된다.

쿨링용 슬레트 핀 M/C Form Roll의 Roll Stand부 마찰 특성 (The Friction Characteristics of Roll Stand in the Cooling Slat Fin M/C)

  • 최원식;이성용;권주리;진은영;문희준;이인
    • Tribology and Lubricants
    • /
    • 제26권1호
    • /
    • pp.52-55
    • /
    • 2010
  • This study investigates the friction of the roll stands in the high performance multi- holes slate fin machine which pin is using in heat transfer of radiator, oil cooler, inter cooler, condenser and evaporator. The roll stand part is very important to maintain the high performance fin machine. This multi-holes form roll type is the first time in our country so it will be helpful to increases the export and product of heat transfer. It was include the technical of form rolling system which was self development. Then it will be improve the electric home appliances, future motor vehicle device and industrial machine.

군 항공화물수요 시계열 추정과 수송기 최적화 노선배정 (Forecasting Air Freight Demand in Air forces by Time Series Analysis and Optimizing Air Routing Problem with One Depot)

  • 정병호;김익기
    • 대한교통학회지
    • /
    • 제22권5호
    • /
    • pp.89-97
    • /
    • 2004
  • 현재 군 수송기는 매주 일정 대수가 각 기지 간 물자수송, 인원수송 그리고 조종사들의 훈련목적으로 정해진 스케줄에 의해 운항하고 있다. 일일 수송기 운행 경로는 모 기지에서 이륙하여 몇 개의 기지를 경유하여 임무를 수행한 후, 다시 모 기지로 돌아오는 패턴을 취하고 있다. 본 연구는 공군의 중앙물자를 저장하는 창에서 각 기지로 물자를 수송할 때 물량예측 및 적정노선에 대해서 시계열분석과 차량경로모형이라는 두 가지 방법을 통해 접근한다. 먼저 현재 공군에서 사용하고 있는 각종 규정과 교범상의 항공수송에 대한 제약사항 자료를 수집하여, 이를 바탕으로 본 연구에서는 다회방문이 가능하고, 경우회수에 대한 제약을 갖는 모형시과 알고리즘을 제안하였다. 또한 지난 몇 년간의 수송물량을 시계열 분석을 이용하여 예측하고, 예측된 수송소요를 제안된 알고리즘에 적용하여 적정노선을 계획하는 방법을 제안하였다. 제안된 모형과 알고리즘의 적합성과 경제성을 파악하기 위해 본 연구에서는 모형에서 계산된 수송물량과 필요 수송기 대수와 실제 공군에서 수행된 항공화물 수송 물량과 투입 수송기 대수를 비교함으로써 객관적인 모형의 우수성을 입증하고자 하였다.

복층터널 자동 모니터 소화설비를 이용한 화재진압 실험 (Fire Suppression Test using the Automatic Monitor System for Double-Deck Tunnel)

  • 박진욱;유용호;김휘성;박병직;김양균
    • 한국화재소방학회논문지
    • /
    • 제31권6호
    • /
    • pp.40-46
    • /
    • 2017
  • 대도심지의 교통 체증 문제로 발생되는 경제적 손실의 해결방안으로 대심도 지하도로 개발이 국내외적으로 대두되고 있으며, 이 중 일부는 시공성 및 경제성이 뛰어난 복층터널로 계획되고 있다. 그러나 복층터널은 하나의 굴착단면에 중간 슬래브를 설치하여 상 하행선으로 사용하는 특수한 구조로 인해 일반 터널보다 층고가 낮게 설치되어 터널내에서 발생되는 화재사고 및 환기 문제에 대해 비교적 취약하다. 따라서, 복층터널의 방재적 약점을 극복하기 위해서는 복층터널에 최적화된 방재 설비구축 연구가 국내에서도 체계적으로 수행되어야 한다. 본 연구에서는 복층터널 화재 안전성 향상을 위해 화재발생시 초기 화재 진압 및 확산 방지가 가능한 자동모니터 소화설비를 개발하였으며, 차량화재 진압 실험을 통해 성능시험을 수행하였다. 그 결과로부터 30 m 거리의 차량내부화재 및 10 m 거리의 엔진룸 화재에 대해 화재 확산 방지 및 진압 효과를 확인하였다.

연료전지자동차용 수소제조와 저장·운반기술동향 (Technical Trends of Hydrogen Manufacture, Storage and Transportation System for Fuel Cell Vehicle)

  • 길상철;황용길
    • 자원리싸이클링
    • /
    • 제25권1호
    • /
    • pp.48-59
    • /
    • 2016
  • 화석연료를 사용하는 선박이나 자동차는 $CO_2$가스를 과대하게 발생하므로 지구 온난화에 영향을 주기 때문에 화석연료 대신 수소를 사용하는 수소연료전지자동차(FCV)가 크게 각광을 받고 있다. 우리나라는 현대자동차가 FCV자동차를 미국, 일본, 독일 등의 선진국들의 자동차회사와 경쟁적으로 개발하고 있다. 수소는 제철소의 코크스 공장, 서유화학공장의 부산물로 얻으며, 석탄, 메탄가스 등을 고온에서 증기와 반응시켜서 메탄 수증기개질법과 압력스윙흡착법 또는 막분리형멤브레인개질 법을 이용한 수소분리형개질방법으로 고순도 수소를 제조하거나 물을 전기분해하여 제조한다. 수소는 전자공업, 금속 및 화학공업, 로켓 연료 및 공장, 병원, 가정용 등의 연료전지시스템이나 FCV의 연료로 사용하고 있다. 수소의 저장은 수소용기에 수소를 압축하는 방법과 액화수소로 저장하는 방법이 일반적이고, 최근 수소화물이나 유기화학하이드라이드법으로 저장하여 수소스테이션에 운반해서 사용한다. 우리나라는 현재 13개소의 수소스테이션이 가동 중에 있으며, 향후 43개소를 설치할 계획이다.