• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(II)
• /
• pp.311-318
• /
• 2003

Traffic management means the management of streams of people, vehicle and cargo. Its aim is to help creating an efficient, safe and environmentally friendly transport system. Traffic management can roughly be divided in traffic control and monitoring, traffic information and demand management. The main purpose of this thesis is providing the basis for developing the next generation train traffic management system by comparing domestic and abroad train traffic management system. The composition of this thesis has been discussed in the following order of the comparison of train traffic management system's function, the introduction of Autonomous Decentralized system, the comparison between CTC and ATOS. the comparison between the hierarchy system and Autonomous Decentralized system, the study of introduction plan of Autonomous Decentralized-type train traffic management system and conclusion.

• 대한교통학회:학술대회논문집
• /
• 대한교통학회 1996년도 제30회 학술발표회
• /
• pp.7-16
• /
• 1996

In this paper a modeling paradigm is described for answering the following questions: What would be the economic impact A, the social impact B, the demographic impact C, the land-use impact D, the environmental impact E and the user benefit F, over geographic scale G for a transport investment H at time T. The paradigm is illustrated for two ITS technologies: Advanced Transportation Management System (ATMS)and Advanced Vehicle Control Systems (AVCS).

• International Journal of Railway
• /
• 제5권1호
• /
• pp.38-47
• /
• 2012

At present among the most important problems in the field of traction systems of railway vehicles are the following: 1) the minimization of the mass-and-overall dimensions of the drive systems; 2) the increase of the drive systems reliability and obtaining their higher fault-tolerance abilities; 3) the minimization of the motion speed pulsations and its oscillations, etc. The results of the researches received by the authors of this paper show that the use of the multiphase (i.e. having the number of phases more than four) inverter-fed induction motors in these traction systems is the most effective way of solving the above mentioned problems. In this case the motion speed oscillations can be decreased only by the increase of the drive phase number without any change in the inverter control algorithm. In addition, the application of some non-traditional control methods in the multiphase asynchronous traction drive system of a railway vehicle allows to decrease the mass-and-overall dimensions of the system and to improve its reliability and some other technical-and economic characteristics.

• 한국철도학회논문집
• /
• 제13권3호
• /
• pp.251-256
• /
• 2010

본 연구에서는 충돌해석 프로그램의 해석 결과와 실제 시험결과에 대한 비교를 통하여 충돌해석 프로그램의 신뢰성에 대한 검증을 진행하였으며, 충돌해석 프로그램을 이용하여 도시철도차량에서 요구하는 차량 편성에 대한 충돌 해석 결과를 제시하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권4호
• /
• pp.1941-1960
• /
• 2019

Unmanned aerial vehicles (UAVs), acting as mobile base stations (BSs), can be deployed in the typical fifth-generation mobile communications (5G) scenarios for the purpose of substantially enhancing the radio coverage. Meanwhile, UAV aided underlay device-to-device (D2D) communication mode can be activated for further improving the capacity of the 5G networks. However, this UAV aided D2D communication system is more vulnerable to eavesdropping attacks, resulting in security risks. In this paper, the D2D receivers work in full-duplex (FD) mode, which improves the security of the network by enabling these legitimate users to receive their useful information and transmit jamming signal to the eavesdropper simultaneously (with the same frequency band). The security communication under the UAV coverage is evaluated, showing that the system's (security) capacity can be substantially improved by taking advantage of the flexible radio coverage of UAVs. Furthermore, the closed-form expressions for the coverage probabilities are derived, showing that the cellular users (CUs)' secure coverage probability in downlink transmission is mainly impacted by the following three factors: its communication area, the relative position with UAV, and its eavesdroppers. In addition, it is observed that the D2D users or DUs' secure coverage probability is relevant to state of the UAV. The system's secure capacity can be substantially improved by adaptively changing the UAV's position as well as coverage.

• 한국ITS학회 논문지
• /
• 제10권6호
• /
• pp.32-39
• /
• 2011

꼬리물기는 교차로에 정체가 발생하면 녹색 현시라도 진입해서는 안 되는데 이를 무시하고 무리하게 진입, 신호가 바뀐 뒤 다른 방향의 차량흐름에 방해를 주는 행위이다. 인력에 의한 단속 방법은 한계가 있어 지속적으로 단속을 하기위해서는 대체 방안이 필요하다고 하겠다. 교차로에서의 꼬리물기 위반를 시스템을 통해 단속가능한 지 여부를 파악하기 위해 실제 현장에서 실험을 통해 평가를 수행하였다. 본 연구에서는 현재 운영 중인 신호위반 단속장비와 달리 위반 차량을 단속하는 시점을 교차로 진출부 횡단보도 부근에서 하였으며, 위반 차량을 역추적 방식으로 궤적을 추적하는 방식을 적용하였다. 현장 실험 결과 시스템에 다음과 같은 결론을 얻었다. 교차로 꼬리물기 위반 차량에 대한 단속 능력, 즉 위반차량 검지율 및 오검지율을 평가한 결과, 평균 검지율은 83.5%, 오단속률은 0.2, 오인식률 1.5%로 나타났다. 따라서 꼬리물기 위반 차량을 무인단속장비에 의해 단속을 할 수 있을 것으로 판단된다.

• 한국안전학회지
• /
• 제32권6호
• /
• pp.22-28
• /
• 2017

According to the National Fire Data System (NFDS), more than 5,000 vehicle fires have occurred every year for the last 10 years. Vehicle fires are primarily caused by mechanical (breaking system and engine), electrical (wiring and battery), and chemical (oil and fuel gas leakage) problems. The electrical factor has increased with the installation of driver convenience equipment. For example, today, the black box is widely used to provide video data recording of motor vehicle accidents. The black box consists of a front camera, rear camera, and wires. The black box wires are directly connected to the junction box or fuse box from the start battery that operates to provide normal on power supplying for engine stop. It is extremely dangerous when the wires short circuit due to insulation aging, mechanical and electrical stress, etc. In this study, the black box wiring fire risk have been analyzed and investigated when the steady state and abnormal operations, and under the following conditions: wiring arrangements with a high temperature condition, insulation aging, poor contact, and short circuits. The results showed that black box wiring short circuits had a higher fire risk than the other fire hazard elements. To prevent fire hazards caused by black box wiring, the black boxes must be installed by qualified service personnel. Do not modify the wiring, remove the fuse and secure the wiring using cable ties or insulation tape.

• 대한교통학회지
• /
• 제14권4호
• /
• pp.91-106
• /
• 1996

This paper deals with on the efficiency questions of the left-turn prohibit at an isolated intersection and a corridor with 5-phase signal system. Its objectives are three-fold ; (1) to analyze the efficiency of the left-turn prohibit with the use of an imaginary network, (2) to evaluate various factors under consideration in decision making on the left-turn prohibit, (3) to provide a framework for estimating and evaluating overall impacts of the left-turn prohibit in traffic network. the major findings using an imaginary network and computer packages such as MINUTP, TRANSYT-7F and STATGRAPH are followings. First, left-turn prohibit reduces cycle length by 33 seconds and delay time per vehicle by 36 seconds at an isolated intersection, and cycle length by 31 seconds and delay time per veicle by 43 seconds along a corridor. Second, total vehicle mile of travel and total travel time at an isolated intersection seem up to increase 38.85 miles(57.36km), 14.4 hour on the average, Regarding to a corridor, total vehicle mile of travel is increased by 50.14 miles(80.22km), but total travel time is decreased by129.9 hours. Third, the efficiency of left-turn prohibit are affected the following eight factors including left-turn volume(veh/hr) and ratio(%), average delay time per vehicle(sec/veh) and others. Finally, several simple and multiple regression models to evaluate the impacts on the left-turn prohibit are formulated from the above eight factors. It can be expected that these models will take an important role in decision-making of left-turn prohibit.

• 전기학회논문지P
• /
• 제57권3호
• /
• pp.338-342
• /
• 2008

Hybrid Electric Vehicle(HEV) is driven by an internal-combustion engine and an electric motor. It is a combination of an internal-combustion engine and several electrical equipments which use a high voltage battery, an electric motors, an inverter and others. But there is not any separate detailed enforcement regulations for high voltage electric appliances in the existing vehicle-related safety standards. So, test standards suggestion as well as test technique development need to be done for ensuring electrical safety, for an electric motor, a high voltage battery, a(n) inverter/converter and an electric power transmission units and other equipments to ensure the safety of high voltage electric appliances which is the HEV key electrical component. In this paper, We are to provide helpful data to support test technique development and test standard establishment for HEV design and electrical safety security by the following methods; by measuring the voltage, the electric current, and the frequency of HEV, by analyzing electrical characteristics of high voltage electric appliances, and by analyzing temperature characteristics of the electrical current among the analyzed electrical characteristics by thermal imagining cameras.

• Environmental Engineering Research
• /
• 제23권3호
• /
• pp.265-270
• /
• 2018

This study was to measure the exposure of diesel vehicle drivers to elemental carbon (EC) as an indicator of diesel particulate matter (DPM) emitted from diesel vehicles in an underground coal mine over 3 years as per NIOSH Method 5040. Our study results (range $10{\mu}g/m^3-377{\mu}g/m^3$ for the loader drivers, $19{\mu}g/m^3-162{\mu}g/m^3$ for the SMV drivers) were similar or less than previous study results (range $5{\mu}g/m^3-2,200{\mu}g/m^3$) for normal mine operations. From this study results, it appeared that the exposures decreased in the second and the third year. It is thought that the reasons for the decreased personal DPM (EC) exposures over the 3 years were related to the following recommendations; more frequent monitoring and maintenance of the diesel vehicles and their DPM filtration systems, more consistent monitoring of the mine's ventilation system and changes of work practices such as minimizing the opening of diesel vehicle windows. An educational program on adverse health effects of exposure to DPM and use of respiratory protection (P2 respirators) also assisted in minimizing driver exposure to DPM.