• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.2
• /
• pp.151-157
• /
• 2010

This paper presents the modelling of an MR damper system through extensive experimental studies. The hysteresis of the MR damper is modelled by using the improved Bouc-wen model. A test bed for experimental studies of measuring parameters of the MR damper is designed and implemented. Based on the experimental data, the Bouc-Wen Model is modified for the MR damper system. To check the modelling property, a vehicle suspension system is controlled using a PID controller for the verification of the MR damper model.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.6
• /
• pp.84-93
• /
• 2004

This study carries out the performance improvement and simplification of hydraulic modulator that plays an important role in vehicle stability control systems. The mathematical models for each component of a modulator, such as pump, wheel cylinder, check and solenoid valve, accumulator, damper are derived in detail. All the mathematical models are combined to form a modulator system and implemented through a computer program, which can be controlled by a user friendly GUI. To verity the simulation, comparison between simulation and experiments has been made. After the verification of the validity of the simulation, the effects of the design parameters of the modulator on the wheel cylinder pressure is investigated. The results show that the modulator without MPA has advantage in early time pressure rise rate, and it can be simplified.

• Journal of Korea Multimedia Society
• /
• v.24 no.9
• /
• pp.1203-1210
• /
• 2021

In this paper, we developed the inspection system of electric vehicle pouch battery using image processing. Line scan cameras are used for acquiring the all parts of the pouch battery, and several steps of image processing for extracting significant dimensions(User Required Position) of the battery. In image processing, edge lines, node points, dimension lines, etc. were extracted using Preprocessor, Square Edge Detection, and Size Detection algorithms. This is used to measure the dimensions of the location requested by the user on the pouch battery. For verification of the inspection system, the dimensions of three pouch batteries produced in the same process were measured, and the mean and standard deviation were obtained to confirm the precision.

• Journal of the Korean Society of Systems Engineering
• /
• v.18 no.1
• /
• pp.58-65
• /
• 2022

An application case of systems engineering (SE) processes for the small unmanned aerial vehicle (UAV) development project, which was funded by the Korean government during June 2017 ~ August 2020, is briefly presented in this paper. From the beginning to the end of the project, SE processes had been applied and managed by simple and intuitive aspects for the small/medium business companies joined with insufficient experiences of SE. And the specific considerations of the processes were focused to the missions of disaster and public safety purposes required from the government, such as identification, patrol, fire, rescue, etc. As a result, the project applied by the tailored SE processes had been rated of a good and higher accomplishment on the final evaluation, and then the related several programs were prepared successively for the other opportunities.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.2_1
• /
• pp.239-248
• /
• 2023

In this paper, we conduct a study on the design that can secure the safety of the EPLA system by performing safety activities based on the ISO 26262 standard for vehicle functional safety. In the case of a company developing a detailed system, it is responsible for verification through hardware design and safety analysis in the overall flow of safety activities, and safety analysis according to the ASIL safety level must be properly performed. At this time, there are cases where the safety goal quantitative metric value suggested by the ISO 26262 standard cannot be satisfied only by the hardware design of the basic function, so it is necessary to design and install the safety mechanism. Based on ISO 26262 safety activities, it is possible to derive an effective design plan through hardware safety analysis.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.47 no.6
• /
• pp.86-96
• /
• 2010

In this paper, we propose stereo vision-based obstacle detection and vehicle verification methods using U-disparity map and bird's-eye view mapping. First, we extract a road feature using maximum frequent values in each row and column. And we extract obstacle areas on the road using the extracted road feature. To extract obstacle areas exactly we utilize U-disparity map. We can extract obstacle areas exactly on the U-disparity map using threshold value which consists of disparity value and camera parameter. But there are still multiple obstacles in the extracted obstacle areas. Thus, we perform another processing, namely segmentation. We convert the extracted obstacle areas into a bird's-eye view using camera modeling and parameters. We can segment obstacle areas on the bird's-eye view robustly because obstacles are represented on it according to ranges. Finally, we verify the obstacles whether those are vehicles or not using various vehicle features, namely road contacting, constant horizontal length, aspect ratio and texture information. We conduct experiments to prove the performance of our proposed algorithms in real traffic situations.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.2
• /
• pp.129-143
• /
• 2019

As the importance of autonomous vehicle safety is emphasized, the application of ISO-26262, a development verification guideline for improving safety and reliability, and the safety verification of autonomous vehicles are becoming increasingly important, in particular, SAE standard level 3 or higher level autonomous vehicles detect and decision the surrounding environment instead of the human driver. Therefore, if there is and failure or malfunction in the autonomous driving function, safety may be seriously affected. So autonomous vehicles, it is essential to apply and verity the safety concept against failure and malfunctions. In this study, we study the fault injection scenarios for safety evaluation and verification of autonomous vehicles using ISO-26262 part3 process and STPA were studied and safety measures for safety concept design were studied through simulation bases fault injection test.

• Journal of Broadcast Engineering
• /
• v.21 no.4
• /
• pp.609-620
• /
• 2016

Recently, there are active studies on a forward collision warning system to prevent the accidents and improve convenience of drivers. For collision evasion, the vehicle detection system is required. In general, existing learning-based vehicle detection methods use the entire appearance of the vehicles from rear-view images, so that each vehicle types should be learned separately since they have distinct rear-view appearance regarding the types. To overcome such shortcoming, we learn Haar-like features from the lower part of the vehicles which contain tail lights to detect vehicles leveraging the fact that the lower part is consistent regardless of vehicle types. As a verification procedure, we detect tail lights to distinguish actual vehicles and non-vehicles. If candidates are too small to detect the tail lights, we use HOG(Histogram Of Gradient) feature and SVM(Support Vector Machine) classifier to reduce false alarms. The proposed forward vehicle detection method shows accuracy of 95% even in the complicated images with many buildings by the road, regardless of vehicle types.

• Journal of the Korean Society of Radiology
• /
• v.15 no.6
• /
• pp.833-839
• /
• 2021

The Possibility of Denuclearization Verification of Korean peninsula is mentioned. Considering the geographical and linguistic advantages, it is necessary to show willingness to participate in the denuclearization verification. In this study, investigation about nuclear facilities, characteristic of facilities, core resource, operation history, geographic/weather environment were performed. Transport route accessibility analysis and risk analysis for development of transport scenario were performed. Accessibility analysis was classified into airport, port, and vehicle transport. Distance by route, estimated time required, and transit roads were analyzed. In this process, it was possible to confirm the suitability of the vehicle transport scenario. Through follow-up studies, we intend to develop an optimal transport scenario.

• Journal of Advanced Navigation Technology
• /
• v.22 no.5
• /
• pp.391-399
• /
• 2018

V2X communication is a technology in which a vehicle exchanges information with various entities such as other vehicles, infrastructure, networks, pedestrians, etc. through a wired or wireless network. Recently, V2X communication technology has been steadily developed and recently it has played an important role in autonomous cooperation driving technology combined with autonomous vehicle technology. Autonomous vehicles can utilize the external information received via V2X communication to extend the recognition range of existing sensors and to support more safe and natural autonomous driving. In order to operate these autonomous cooperative vehicles on public roads, the security and reliability of autonomous V2X communication should be verified in advance. In this paper, we present test scenarios and test procedures of secure V2X communication for cooperative automated driving and present verification results.