• 대한토목학회논문집
• /
• 제31권3A호
• /
• pp.163-172
• /
• 2011

CFTA 거더는 아치형상을 갖는 콘크리트 충전 강관구조이며 초기처짐 및 공용 중 응력제어를 위해 외부긴장재를 배치한 거더 형식이다. 본 연구에서는 차량진행에 따른 거더의 동적거동에 긴장재가 미치는 영향을 분석하였다. 이를 위해 유한요소 프로그램을 이용하여 거더 및 긴장재 등을 수치모델링하였으며 긴장재의 양과 긴장력을 다양한 값으로 변화시켰다. 차량하중은 도로교설계기준의 DB-24 하중을 고려하였으며 3축-2트랙으로 모델링하였다. 차량하중은 등가절점하중으로 적용시켰으며 차량하중의 이동은 차량통과 시간 및 절점수를 고려한 각 절점에서의 시간함수로 나타내었다. 차량속도는 40 km/hr에서 100 km/hr까지 20 km/hr씩 증가시켰다. 해석결과 긴장재의 긴장력 변화는 거더의 동적거동에 영향을 주지않았으며 초기처짐에만 영향을 주었다. 긴장재의 양에 따라서는 거더의 동적거동이 다르게 나타났으며 긴장재의 양이 적을수록 동적처짐은 증가하였다. 이를 바탕으로 거더의 동적증폭계수(DAF)를 산출하였으며 긴장재가 없는 경우에도 AASHTO LRFD와 도로교 표준시방서에서 정한 기준값보다 매우 작은 안정적인 거동을 보였다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.249-256
• /
• 2004

KRISO/KORDI is currently developing a deep-sea unmanned underwater vehicle (UUV) system which is composed of a launcher, an ROV, and an AUV. Two USBL acoustic positioning systems will be used for UUV's navigation. One is for the deep sea positioning of all three vehicles and the other is for AUV's guidance to the docking device on the launcher. In order to increase the position accuracy MFSK(Multiple Frequency Shift Keying) broadband signal will be used. As the first step to the implementation of a USBL system, this paper studies USBL positioning algorithm using MFSK signals. Firstly, the characteristics of MFSK signal is described with various MFSK parameters: number of frequencies, frequency step, center frequency, and pulse length. Time and phase delays between two received signals are estimated by using cross-correlation and cross-spectrum methods. Finally an USBL positioning algorithm is derived by converting the delays to difference of distances and applying trigonometry. The simulation results show that the position accuracy is improved highly when both cross-correlation and cross-spectrum of MFSK signals are used simultaneously.

• 자동차안전학회지
• /
• 제4권2호
• /
• pp.37-43
• /
• 2012

The purpose of this research is to obtain and analyze dynamic responses from human volunteers for the development of the human-like mechanical or mathematical model for Korean males in automotive rear collisions. This paper focused on the introduction to a low-speed rear impact sled test involving Korean male subjects, and the accumulation of the motion of head and neck. A total of 50 dynamic rear impact sled tests were performed with 50 human volunteers, who are 30-50 year-old males. Each subject can be involved in only one case to prevent any injury in which he was exposed to the impulse that was equivalent to a low-speed rear-end collision of cars at 5-8 km/h for change of velocity, so called, ${\Delta}V$. All subjects were examined by an orthopedist to qualify for the test through the medical check-up of their necks and low backs prior to the test. The impact device is the pendulum type, tuned to simulate the crash pulse of a real vehicle. All motions and impulses were captured and measured by motion capture systems and pressure sensors on the seat. Dynamic responses of head and T1 were analyzed in two cases(5 km/h, 8 km/h) to compare with the results in the previous studies. After the experiments, human subjects were examined to check up any change in the post medical analysis. As a result, there was no change in MRI and no injury reported. Six subjects experienced a minor stiffness on their back for no more than 2 days and got back to normal without any medical treatment.

• 한국전자파학회논문지
• /
• 제24권8호
• /
• pp.798-804
• /
• 2013

본 논문에서는 고주파 회로 모델링을 이용하여 전기자동차의 LDC로부터 방출되는 전도성 전자파 잡음을 시스템-레벨에서 분석하였다. 관련 전도 방출의 주요 원인은 LDC에서 사용하는 펄스폭 변조 방식의 100 kHz 스위칭 동작에 기인하며, 이러한 전도 방출은 공통-임피던스 결합 및 유도성 결합을 통해 AM/FM 주파수 대역에서의 무선주파수 간섭을 유발한다. 이러한 문제를 분석하기 위해 LDC를 구성하고 있는 MOSFET과 고압 커패시터, 고전압 케이블과 버스 바에 대한 기본 회로는 물론, 각 부분에서 존재하는 기생 성분 및 비선형 특성을 해석하여 LDC 전체를 포함한 시스템-레벨의 고주파 등가회로 모델을 제안하였다. 이러한 모델을 이용하여 시뮬레이션과 측정을 비교하여 유사성을 검증하였다. 향후 이러한 접근 방법이 전기자동차의 전자파 적합성 설계에 효과적으로 사용될 수 있을 것으로 기대한다.

• 대한기계학회논문집A
• /
• 제26권8호
• /
• pp.1577-1584
• /
• 2002

This paper develops a finite element model for studying the occupant behavior and injury cofficients of a large-sized cab-over type truck. Since it does not have a room to absorb collision energy and deformation in front of the passenger compartment the deformation is directly transmitted to the passenger compartment. Moreover, since its steering column is attached on the frame, severe deformation of the frame directly affects on the steering wheel's movement. Therefore, if the occupant behavior and injury coefficients analysis is performed using a finite element model developed based on a sled test, it is very difficult to expect acquiring satisfactory results. Thus, the finite element model developing in this paper is based on the frontal crash test in order to overcome the inherent problems of the sled test based model commonly used in the passenger car. The occupant behavior and injury coefficients analysis is performed using PAM-CRASH installed in super-computer SP2. In order to validate the reliability of the developed finite element model, a frontal crash test is carried out according to a test method used fur developing truck occupant's secondary safety system in european community and japan. That is, test vehicle's collision direction is vertical to the rigid barrier and collision velocity is 45kph. Thus, measured vehicle pulses at the lower parts of the left and right B-pilla., dummy chest and head deceleration profiles, HIC(head injury criterial) and CA(chest acceleration) values, and dummy behavior from the frontal crash test are compared to the analysis results to validate reliability of the developed model.

• 한국전자파학회논문지
• /
• 제24권1호
• /
• pp.82-90
• /
• 2013

본 논문에서는 고주파 회로 모델링을 이용하여 전기자동차의 모터 구동 시스템으로부터 방출되는 전도성 전자파 노이즈를 시스템-레벨에서 분석하였다. 관련 전도 방출의 주요 원인은 모터 구동 시스템에서 사용하는 펄스폭 변조방식의 스위칭 동작에 기인하며, 이러한 전도 방출은 공통-임피던스 결합 및 유도성 결합을 통해 AM/FM 주파수 대역에서의 무선주파수 간섭을 유발한다. 이러한 문제를 분석하기 위해 모터 구동 시스템을 구성하고 있는 IGBT와 고압 커패시터, 인버터, 모터 및 고전압 케이블과 버스 바에 대한 기본 회로는 물론, 각 부분에서 존재하는 기생 성분 및 비선형 특성을 해석하여 모터 구동 시스템 전체를 포함한 시스템-레벨의 고주파 등가회로 모델을 제안하였다. 이러한 모델을 이용한 모터 구동시스템의 전도 방출 특성을 시뮬레이션하고, 측정하였으며, 비교적 큰 해석구조임에도 불구하고 두 결과가 비교적 잘 일치함을 확인하였다. 향후 이러한 접근방법이 전기자동차의 전자파 적합성 설계에 효과적으로 사용될 수 있을 것으로 기대한다.

• 한국소음진동공학회논문집
• /
• 제19권8호
• /
• pp.781-787
• /
• 2009

This research is concerned with the application of the active linear actuator to the active vibration control of structure. The active linear actuator will be mounted on the sub-frame so that it can cancel the excitation transferred from the engine. Accelerometer mounted on the sub-frame detects the vibration and its signal is fed into the DSP controller where the control algorithm is installed. The output of the DSP controller is connected to the driver which amplifies the DSP output. In general, the pulse width modulation power amplifier is used to drive the voice-coil type actuator. This study shows the dynamic characteristics of the active linear actuator and active vibration control experimental results.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2008년도 정기 학술대회
• /
• pp.350-355
• /
• 2008

This paper addresses vibration comfort evaluation on suspension bridge subjected to moving vehicles. The moving load method is commonly employed for the analysis, even though it is less accurate than the moving mass approach which considers vehicle-bridge interaction effects and roughness of the pavement. In this study, a parametric study on modeling method by means of the moving load technique, such as the number of modes included in the analysis, types of moving loads, and length of the stiffening girder, is carried out. The numerical result indicated that use of the triangular pulse load may result in significant overestimation on vibration discomfortness.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2009년도 정기총회 및 추계학술대회 논문집
• /
• pp.268-270
• /
• 2009

This paper proposes a simple starting method to arrange the rotor position of the blushless DC motor (BLDC) without additional sensors and any information of motor parameters. Both the stator current and time period for arranging the rotor position can be easily adjusted by modulating a pulse width of switching devices. Using the proposed method, it is demonstrated experimentally that the BLDC starts up very smoothly.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.1-4
• /
• 2011

Detonation is useful phenomena to get an effective thrust for aerospace vehicle. Fast pressure rise of detonation provides a cycle close to the constant volume system to use energy efficiently. From this point detonation can be used as an aerospace engine system. There are several types of detonation engine; pulse detonation engine (PDE) which provides a thrust by detonation intermittently, and oblique detonation engine (ODE), spin detonation engine (SDE), and rotating detonation engine (RDE) which, on the other hand, provide a continuous thrust.