• 한국분무공학회지
• /
• 제27권2호
• /
• pp.94-100
• /
• 2022

Even in non-road UTV (Utility Terrain Vehicle), spark ignition engines are often used to reduce emissions. In this study, gasoline and LPG (Liquified Petroleum Gas) fuels were applied to UTV engines, and the exhaust gas and combustion stability were compared through engine tests. A 0.8-liter two-cylinder SI engine was used in the experiment. Experiments were conducted while changing the IVO (Intake Valve Open) and EVC (Exhaust Valve Close) at 1500 rpm 14 N·m, 40 N·m, and 3000 rpm 17 N·m, 44 N·m conditions. As a result of the experiment, when the valve overlap increased according to the change of IVO and EVC, combustion stability decreased and THC emission increased, but NOx decreased. Comparing the LPG engine with the gasoline engine, the amount of CO₂ and PN (Particulate Number) generation decreased in the LPG engine, and the combustion stability was good.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집B
• /
• pp.150-155
• /
• 2000

Exhaust emissions from vehicles are the main source of air pollution. Many researchers are trying to find the way of reducing vehicle emissions, especially in the cold transient period of the FTP-75 test. In this study, UEGI (Unburned Exhaust Gas Ignition) technology, warming up the close-coupled catalytic converter (CCC) by igniting the unburned exhaust mixture using two glow plugs installed in the upstream of the catalyst, was developed. It was applied to an exhaust system with a hydrocarbon adsorber to ensure an effective reduction of HC emission during the cold start period. Results showed that the CCC reaches the light-off temperature (LOT) in a shorter time compared with the baseline exhaust system, and HC and CO emissions are reduced significantly during the cold start.

• 융복합기술연구소 논문집
• /
• 제4권1호
• /
• pp.9-13
• /
• 2014

The purpose of this study is analysis to vehicle's fuel economy and emission gas characteristics by fuel type. The test vehicle were selected to similar weight and performance, the test vehicle was used three representative mode(CVS-75, HWFET and NEDC) in order to evaluation fuel economy and emission gas. For reference, environment pollution cost was calculated on the basis of the exhaust emissions occurred in the test in progress.

• 한국자동차공학회논문집
• /
• 제16권2호
• /
• pp.128-135
• /
• 2008

EGR(exhaust gas recirculation) is considered as a most effective method to reduce the NOx emissions. But high EGR tolerance is always pursued not only for its advantages of the pumping loss reduction and fuel economy benefit in Gasoline-Hybrid engine. However, the occurrence of excessive cyclic variation with high EGR normally prevents substantial fuel economy improvements from being achieved in practice. Therefore, the optimum EGR rate should be carefully determined in order to achieve low fuel consumption and low exhaust emission. In this study, 2 liters gasoline engine with E-EGR system was used to investigate the effects of EGR on fuel efficiency, combustion stability, engine performance and exhaust emissions. With optimal EGR rates, the fuel consumption was improved by 4%. This improvement was achieved while a reduction in NOx emissions of 75% was accomplished. Increase of EGR gas temperature causes the charge air temperature to affect the knock phenomenon and moreover, the EGR valve lift changes for the same control signal.

• 에너지공학
• /
• 제5권1호
• /
• pp.42-49
• /
• 1996

천연가스는 기존 내연기관의 구조를 크게 변경시키지 않고도 사용이 가능하며, 저공해성, 안전성, 내구성 등에 있어서 우수한 특성을 가지고 있고, 매장량이 풍부하다는 점에서 자동차용 대체연료로서 유망시 되고 있다. 본 연구에서는 기존 가솔린 기관을 CNG 전용기관으로 개조한 후, 공연비, 점화시기 등과 같은 기관 운전조건들을 최적화한 CNG전용기관을 기존 가솔린차량에 탑재하여, 샤시동력계상에서 연료소비량 및 배기배출물 농도를 측정·비교하였다. 또한, 실도로상에서 가속성, 운전성 등의 차량 주행특성에 대해서도 평가하였다. 그 결과, 시작 CNG차량의 경우에는 가솔린 차량에 비하여 연비는 향상되었고 배기배출물은 저감되었으나 출력은 약간 감소되었다.

• 동력기계공학회지
• /
• 제21권4호
• /
• pp.57-61
• /
• 2017

The vehicle label fuel economy is used as an energy management indicator nationwide. It induces technology development of automobile manufacturers and plays a role of providing information when purchasing a consumer vehicle. However, consumers who purchase a new vehicle continued to complain that the label fuel economy is different from the mandatory fuel economy rate. The domestic fuel economy measurement method is the same as the North American measurement method. The results of the two test modes (urban (FTP-75 mode), highway (HWFET mode)) are calculated in five test modes reflecting various environmental conditions and driving patterns 5-cycle correction formula is used which is equivalent to the fuel efficiency value. In this study, to solve the consumers' curiosity about the fuel economy of new vehicle, we use domestic fuel economy measurement method to measure the new car condition within 150 km of driving distance and the cumulative driving distance condition of domestic label fuel economy test vehicle. A comparative evaluation of fuel economy was carried out for a durability vehicle of $6,500{\pm}1,000km$. A result, mean value of the fuel economy of the four gasoline vehicles increased by 2.7 % in the city center mode and by 2.5 % in the highway mode in the durable vehicle compared new vehicle. And in the case of the diesel vehicle it increased by 2.5 % and 3.9 % respectively. The harmful exhaust gas emitted from the vehicle also resulted in more emissions of both gasoline and diesel vehicles in new vehicles. It is considered that the increase of the frictional force of the vehicle driving system and the lubricating oil system would have an effect on the reduction of the fuel economy of the new vehicle, and it was found that the fuel economy and the exhaust gas were improved by proper cumulative distance (domesticate) to the new vehicle.

• Journal of Biosystems Engineering
• /
• 제39권4호
• /
• pp.274-282
• /
• 2014

Purpose: In this study, a hybrid power system was developed for agricultural machines with a 20-KW output capacity, and it was attached to a multi-purpose cultivator to improve the performance of the cultivator, which was evaluated using output tests. Methods: The hybrid system combined heterogeneous sources: an internal-combustion engine and an electric power motor. In addition, a power splitter was developed to simplify the power transmission structure. The cultivator using the hybrid system was designed to have increased fuel efficiency and output power and reduced exhaust gas emissions, while maintaining the functions of existing cultivators. Results: The fuel consumption for driving the cultivator in the hybrid engine vehicle (HEV) mode was 341 g/KWh, which was 36% less than the consumption in the engine (ENG) mode for the same load. The maximum power take off output of the hybrid power system was 12.7 KW, which was 38% more than the output of the internal-combustion engine. In the HEV mode, harmful exhaust gas emissions were reduced; i.e., CO emissions were reduced by 36~41% and NOx emissions were reduced by 27~51% compared to the corresponding emissions in the ENG mode. Conclusions: The hybrid power system improved the fuel efficiency and reduced exhaust gas emissions in agricultural machinery. Lower exhaust gas emissions of the hybrid system have considerable advantages in closed work environments such as crop production facilities; therefore, agricultural machinery with less exhaust gas emissions should be commercialized. However, the high manufacturing cost and complexity of the proposed system are challenges which need to be solved in the future.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권1호
• /
• pp.75-82
• /
• 2004

In this research, a computer analysis has been developed for predicting the Pipe pressure of the intake and exhaust manifold in a small single cylinder engine. To get the boundary conditions for a numerical analysis one dimensional and unsteady gas dynamic calculation is performed by using the MOC(Method Of Characteristics). The main numerical parameters are engine revolutions. to calculate the Pulsating flow which the intake and exhaust valves are working. The distributions of the exhaust pipe pressures were influenced strongly to the cylinder pressures and the shapes of exhaust pressure variation were similar to the Inside of cylinder pressure As the engine revolutions are increased. the intake pressure was lower than ambient pressure. The amplitude of exhaust pressure had increased and the phase of cylinder pressure $P_c$ is delayed and the amplitude of cylinder pressure were increased.

• 한국자동차공학회논문집
• /
• 제5권2호
• /
• pp.127-135
• /
• 1997

Experiments have been conducted to investigate emission characteristics of compressed natural gas fueled vehicle(CNGV) by the FTP 75 mode test. Its purification technologies were also investigated. It was found that CNGV was operated on the rich A/F condition by comparison with gasoline vehicle. The Pd catalyst was higher in methane purification performance than Pt and Pd/Pt/Rh catalysts. Up to 60% portion of the accumulative HC emissions(that contains above 80% methane) form CNGV occurs during the first phase of the FTP 75 mode. CO that is exhausted at rich conditions of the air-fuel ratio more than lean conditions should be used for the catalytic reduction of NOX, because the methane is not the effective reduction for NOX in the CNGV with 3-way catalyst system.

• 한국응용과학기술학회지
• /
• 제35권4호
• /
• pp.1108-1119
• /
• 2018

대기오염에 대한 관심은 국내 외에서 점진적으로 상승하고 있으며, 자동차 및 연료 연구자들은 청정(친환경 대체연료) 연료와 연료품질 향상 등을 위해 새로운 엔진 설계, 혁신적인 후 처리 시스템 등의 많은 접근을 통하여 차량 배출가스와 온실가스를 감소시키려고 노력하고 있다. 이러한 연구들은 주로 차량의 배출가스 (규제 및 미규제물질, PM 입자 배출 등)와 온실가스의 두 가지 이슈로 진행되고 있다. 자동차의 배출가스는 환경오염과 인체에 악영향을 주는 많은 문제를 일으키고 있다. 이러한 배출가스를 줄이기 위하여 각국에서는 배출가스 시험모드를 새로 만들어 규제하고 있다. 2007 년부터 UN ECE의 WP.29 포럼에서 배출가스 인증을 위한 전 세계의 조화된 light-duty 차량 시험 절차 (WLTP)가 개발되었다. 이 시험 절차는 유럽과 동시에 국내 light-duty 디젤 차량에도 적용되어졌다. Light-duty 차량의 대기오염 물질 배출량은 거리 당 무게로 규제되어 있어 주행주기가 결과에 영향을 미칠 수 있다. 차량의 배출가스는 주행 및 환경조건, 주행습관 등에 따라 크게 달라진다. 극단적인 외기온도는 배출가스를 증가시키는데, 이것은 더 많은 연료가 실내를 가열하거나 냉각해야하기 때문이다. 또한 높은 주행속도는 증가된 항력을 극복하기 위해 필요한 에너지로 인해 배출가스 량을 증가시킨다. 일반적으로 상승하는 차량속도와 비교할 때, 급격한 차량가속도도 배출가스를 증가시킨다. 부가적인 장치 (에어컨 또는 히터)와 도로경사 또한 배출가스를 증가시킨다. 본 연구에서는 3대의 light-duty 차량을 가지고 light-duty 차량의 배출가스 규제에 사용되는 WLTP, NEDC 및 FTP-75로 시험을 하였으며, 배출가스가 다른 주행 사이클에 의해 얼마나 많은 영향을 받을 수 있는지를 측정하였다. 배출 가스는 통계적으로 의미있는 차이를 보이지 않았다. 최대 배출 가스는 주로 냉각 된 엔진 조건에 의해 야기되는 WLTP의 저속 단계에서 발견된다. 냉각 된 엔진 상태에서 배출가스의 양은 시험 차량과 크게 다르다. 이는 WLTP 구동 사이클에 대처하기 위해 다른 기술적 솔루션이 필요하다는 것을 의미한다.