• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.44_46
• /
• 2009

Becoming effective on Kyoto protocol, reduction of greenhouse gas is an urgent concern of our world. Transportation, depending on fossil fuel, is required to transfer higher effiency and green tech. oriented one. Electric Vehicle-EV-is take attention with its ability not only to reduce CO2 emission in transportation, but also to support load levelizing, spinning reserve, increase power quality on microgrid. This paper presents the recent policy for EV diffusion and the effects on power system demand and local system power quality.

• 전력전자학회논문지
• /
• 제22권5호
• /
• pp.382-389
• /
• 2017

The development of electronic technology has been rapidly achieved in the automotive industry. A trend that attaches electric equipment, including ECUs at vehicles, is observed. However, decrepit vehicles have several electrical noises and errors. The effect of electric noise on vehicles that are focused on smoke was investigated. Many researchers have argued that one of the reasons of the occurrence of smoke in vehicles is the inexact time of the occurrence of ignition. Moreover, various physical, chemical, and thermodynamic solutions were attempted to approach and many improvements were accomplished. However, in this study, the reduction of electrical and electronic noise is confirmed to improve the accuracy of the injection time on decrepit vehicles with electrical and electric technologies. Previous studies suggest that the distance between the pilot and main ignitions affect the occurrence of smoke and control the variance value of the distance between pilot and main ignitions with electric filter. Thus, the effect of reducing smoke occurred.

• 대한기계학회논문집B
• /
• 제36권5호
• /
• pp.503-508
• /
• 2012

최근에 들어서 이산화탄소가 지구온난화의 원인으로 알려져 있기 때문에 온실가스 문제는 이슈화 되어 왔다. 본 연구는 한국에서 운행 중인 차량에서 이산화탄소 배출가스 영향인자 특성을 파악하고자 했다. 가솔린 자동차 129대, 디젤자동차 100대, LPG 자동차 34대 차량을 차대 동력계에서 시험했다. 시험과정에서 이산화탄소, 일산화탄소 그리고 연료저감율을 측정했다. 실험모드는 현재 한국에서 경차의 배출가스를 규제하기 위해서 배출계수를 산정하기 위해 개발된 CVS-75 모드에서 이루어졌다. 실험 결과 배기량, 연료소비율, 연료 종류, 주행패턴, 마일수 그리고 이산화탄소 사이의 관련성이 조사되었다.

• 동력기계공학회지
• /
• 제19권6호
• /
• pp.47-53
• /
• 2015

Korea is the geographic location during the summer, the temperature rising to $35^{\circ}C$ and winter temperature is $-15^{\circ}C$ to reduce the air temperature changes, such as relatively large compared to other countries. This increase or decrease of the harmful exhaust gas discharged from automobile substantially inconvenience a significant impact on the active side of the car engine temperature and exhaust gas reducing device receives a large impact on the atmospheric temperature is regulation to be different. However, domestic vehicle emissions test temperature of $20{\sim}30^{\circ}C$ is it does not reflect this situation the actual test temperature to accurately measure the exhaust gas volume of the vehicle is difficult. In this study, domestic automobile exhaust gas test conditions of a test temperature $20{\sim}30^{\circ}C$ various temperatures, including (35, 25, 0, -7, -15, $-25^{\circ}C$) under the two vehicles (2.0L MPI, 2.4 L GDI) as was discussed with respect to the exhaust gas characteristics of the vehicle according to the ambient temperature gas. As a result, domestic emissions test temperature of $25^{\circ}C$ than average conditions were temperature decreases greenhouse gas emissions and increase overall increased by up to 15 times higher. Air temperature and the engine exhaust gas inconvenience a direct effect on the activation temperature required in the reduction unit is determined to be an increase of emissions and greenhouse gases, and also an increase in the variety of lubricants based lubricating and viscosity reduction, such as the engine oil due to the low temperature of these result It is considered that shows the.

• 대한기계학회논문집B
• /
• 제38권8호
• /
• pp.665-670
• /
• 2014

최근 대기환경 개선에 대한 관심이 대두되면서 화석연료를 사용 하는 기관에 대한 배출가스 저감 연구가 활발하게 진행 되고 있다. 본 연구는 이러한 저감 기술 중 NOx를 저감하기 위해 가장 많이 적용 되고 있는 EGR system을 Off-road 기계식 디젤엔진에 적용하였을 때 나타나는 배출가스 특성을 파악하기 위하여 진행되었다. EGR system 적용을 위하여 먼저 엔진의 운전영역에 대한 배출가스 특성을 파악하였고, 각각의 엔진회전수 조건에서 다양한 EGR 조건을 적용하여 NOx 저감을 위한 최적 EGR 율을 도출하였다. 이에 따라 수정된 EGR 맵 적용 조건의 엔진 배기 특성에 대해 NRTC 모드를 구현하여 EGR 미적용 조건 및 기존 맵과 비교 및 고찰하였으며, 그 결과로 EGR 미적용 조건 대비 NOx가 약 42% 저감됨을 보였다.

• 한국ITS학회 논문지
• /
• 제19권3호
• /
• pp.90-99
• /
• 2020

전 세계적으로 대기환경 개선을 위해 대기오염물질 배출이 많은 차량의 진입을 제한하는 "공해차량 운행제한지역(LEZ : Low Emission Zone)" 제도 시행이 확산되고 있다. 국내에서도 2012년부터 서울시 전 지역과 일부 수도권 지역을 대상으로 노후경유차 운행제한을 시행하고 있으며, 특히 2019년 12월부터는 서울 도심인 한양도성 녹색교통지역에 진입하는 자동차 배출가스 5등급 차량의 운행을 제한하고 있다. 이에 본 연구에서는 녹색교통지역 자동차 운행제한 운영현황을 살펴보고, 기·종점통행량(O/D) 자료와 지역별 자동차 배출가스 등급별 자료를 활용하여 추후 운행제한 대상차량 확대시 등급별 교통량을 추정해 보고자 한다. 또한 서울시 25개 자치구에 진입하는 배출가스 등급별 교통량을 추정하여, 추후 자동차 운행제한 대상지역 추가 확대시 효과가 클 것으로 예상되는 대상지역(안)을 제안해 보고자 한다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제31권3호
• /
• pp.235-242
• /
• 2007

This paper discusses dynamic characteristics of a urea-SCR (Selective Catalytic Reduction) system. The urea flow rate to improve NOx conversion efficiency is generally determined by parameters such as catalyst temperature and space velocity. The urea-SCR system was tested in the various engine operating conditions governing the raw NOx emission levels, space velocity. and SCR catalyst temperature. These experiments include cold-transients to determine catalyst light-off temperature and urea flow rate transients. Likewise. ammonia storage dynamics was also investigated. The cold-transient results indicate the light-off temperature of the catalysts used in these experiments was $200-220^{\circ}C$. The ammonia storage and urea flow rate transients all indicate very slow dynamics (on the order of seconds) which presents control challenges for mobile applications. The results presented in this paper should provide an excellent starting point in developing a functional in-vehicle urea-SCR system.

• 소성∙가공
• /
• 제26권5호
• /
• pp.277-285
• /
• 2017

Vehicle weight reduction is a known strategy to improve fuel efficiency and strengthen exhaust gas regulation. The use of high strength steel can satisfy safety, efficiency, emission, manufacturability, durability, and cost requirements. However, springback of high strength steel results in undesired shape defects. Springback is one of the most important issues of high strength steel for many applications in an automobile. Servo press has various capabilities to improve defects, process conditions, and productivity problems when forming a high strength steel. Especially, servo press can be set to function with variable slide motion in a single operation. In this study, the effect of servo press slide motion on 980MPa high strength steel was investigated through U-bending test.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1997년도 춘계학술대회논문집; 경주코오롱호텔; 22-23 May 1997
• /
• pp.557-563
• /
• 1997

In order to satisfy the regulations concerned with the noise emission of fork-lift trucks and thereby increase export to the western countries, a noise reduction technique should be developed in the early design stage. In this paper, several noise sources are identified using the sound suppression method and sound intensity measurement, and their contributions to the sound levels at the operator's ears and at the distance of 7m from the vehicle are studied. For each of the major noise producting components, noise abatement alternative are suggested and their effects are analyzed.

• 한국대기환경학회지
• /
• 제14권3호
• /
• pp.261-266
• /
• 1998

Recently, air pollution is increased according to increase of vehicle. So many countries are studying about DOC for diesel emission decrease. However, there are many difficulty in applying to DOC . In this study, SOx exhaust gas equipped with DOC was studied and we obtained several test results as following. First, in diesel oxidation catalyst, additives such as Pt is very effective for 503 and sulfate. Second, the oxidative activity for 502 has decreased to add such as Pt and the decrease of 502 is effect for the reduction of PM in high temperature . And finally, in high temperature, concentration of SOx is increased and temperature is affected by process from SOB to 503, whereas engine performance and fuel consumption are not affected by equipped DOC.