• Journal of Auto-vehicle Safety Association
• /
• v.14 no.1
• /
• pp.39-44
• /
• 2022

This paper presents a development of throttle and brake controller for autonomous vehicle simulation environment. Most of 3D simulator control autonomous vehicle by throttle and brake command. Therefore additional longitudinal controller is required to calculate pedal input from desired acceleration. The controller consists of two parts, feedback controller and feedforward controller. The feedback controller is designed to compensate error between the actual acceleration and desired acceleration calculated from autonomous driving algorithm. The feedforward controller is designed for fast response and the output is determined by the actual vehicle speed and desired acceleration. To verify the performance of the controller, simulations were conducted for various scenarios, and it was confirmed that the controller can successfully follow the target acceleration.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.1173-1175
• /
• 1996

This paper describes a driving simulator for the multimotor driven electric vehicle. The electric vehicle is simulated by a 7-DOF(degree of freedom) model and a couple of developed split torque control algorithms are tested with the simulator to illustrate and verify its normal operation.

• International Journal of Highway Engineering
• /
• v.19 no.5
• /
• pp.97-106
• /
• 2017

PURPOSES: This study aims to evaluate the effects of vehicle dynamic behaviors on ride quality. METHODS : Simulation and field test were conducted to analyze the behavior of a driving vehicle. The simulation program CarSIM was applied and an INS (Inertial Navigation System) was used for field experiments. A small simulator was developed to simulate vehicle behavior such as roll, pitch, and bounce. The panels evaluated the ride quality in five stages from "very satisfied"to "very dissatisfied."Experiments were conducted on a total of 144 cases of vehicle behavior combinations. RESULTS :In both simulation and field tests, pitch is the largest and yaw the smallest. Especially in the field test, the amount of yaw is very low, about 7% of pitch and 18% of roll. The sensitive and extensive analysis conducted related ride quality with changing the frequency and amplitude. It was found that the most sensitive frequency range is 8 Hz across all amplitudes. Moreover, the combination of the roll and bounce was most sensitive to the ride quality at the low-frequency range. CONCLUSIONS : This result show that the vertical vehicle behavior (bounce) as well as the rotational behavior (roll and pitch) are highly correlated with ride quality. Therefore, it is expected that a more reasonable roughness index can be developed through a combination of vertical and rotational vehicle behavior.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.5 no.4
• /
• pp.39-47
• /
• 1997

The focus of this research is to set up and describe the mathematical derivation of an automobile power-assisted rack and pinion steering system dynamics. The mathematical model of the power steering system dynamics with a 5 DOF linear vehicle model will be used in the computer simulation and evaluated comparing with the experimental results. This model is flexible to accommodate different vehicles through simple parameter changes. The developed mathematical model will attempt to provide enhanced driver realism to a Systems Technology, Inc. driving SIMulator(STISIM).

• Tribology and Lubricants
• /
• v.28 no.2
• /
• pp.93-98
• /
• 2012

The engine oil is an oil used for lubrication of various internal combustion engines. Recently, the vehicle and engine oil manufacture usually guarantee for oil change over 15000~20000 km mileage, but the most of driver usually change engine oil every 5000 km driving in Korea. In this case, it is possible to cause environmental contamination by used engine oil and increase the cost of driving by frequently oil change. In this study, we investigate the various physical properties such as flash point, pour point, kinematic viscosity, cold cranking simulator, total acid number, and four-ball test for fresh engine oil and used engine oil after vehicle driving (5000 km, 10000 km). The test result showed that the total acid number and wear scar by four-ball test of used engine oil had increased than fresh engine oil, but 2 kind of used oil (5000 km and 10000 km) had similar physical properties.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.38.5-38
• /
• 2002

1. Introduction 2. System Configuration 3. Performance Evaluation 4. conclusion 5. Acknowledgment

• Proceedings of the KIEE Conference
• /
• 2008.10b
• /
• pp.450-451
• /
• 2008

The Bimodal tram is developed in KRRI (Korea Railroad Research Institute). This vehicle will be used in the public transportation system. The Bimodal tram has the advantages of both bus and train. Bus system has the advantages of flexibility of the routes delivering passengers to the destination and easy accessibility. Train is to meet the scheduled arrival and massive public transportations. The vehicle is the rubber tired tram and is all wheel steered single articulation. The vehicle can be automatically operated by navigation control system (NCS). For the automatic driving, the vehicle lanes will be marked with permanent magnets that are buried in the road. The control algorithm developed for navigation control has to be verified before being applied in the vehicle. In this purpose, we design the simulator for controller test of the bimodal tram.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.5
• /
• pp.195-201
• /
• 2005

In conventional Vehicle Stability Control (VSC) System, a control threshold is designed by average driver characteristics. Despite the stabilizing effort, VSC causes redundancy to an expert driver. An advanced VSC which has flexibility on its control property is proposed in this study. By using lateral velocity estimator, a control threshold is determined on side slip angle and angular velocity phase plane. Vehicle planar motion model based sliding controller is modified with respect to various control thresholds. The performance of the proposed VSC algorithm has been investigated by human-in-the-loop simulation using a vehicle simulator. The simulation results show that the control threshold has to be determined with respect to the driver steering characteristics. A VSC with variable control thresholds would provide an improvement compared to a VSC with a constant threshold.

• Journal of the Korean Society of Safety
• /
• v.21 no.5 s.77
• /
• pp.103-111
• /
• 2006

The purpose of this study was to analyse the relationships between cognitive abilities and driving characteristics of elderly drivers. Driving characteristics of elderly and younger drivers who were driving a fixed base driving simulator vehicle were examined. Participants consisted of 12 drivers over age 65 (the 'older' group) and 12 drivers between the ages of 25 and 55 (the "younger" group). As indices of cognitive ability, critical flicker fusion frequency (CFF) tests and cognitive reaction tests were given before the driving task. CFF was also tested after the simulated driving task for both groups. Cognitive reaction tests, which were composed of speed estimation tests, multiple choice reaction tests and obstacle avoidance tests, were developed by the Korean Road Traffic Safety Authority in 2003. CFF values between the two groups exhibited significant differences both before and after the task, with a p-value less than 0.01 and a t-value of -3.01 before the test and a p-value less than 0.031 and a t-value of -2.35 after the test. Older drivers' CFF values were lower than those of the younger. However, there was no difference in older or younger driver CFF values before and after the task within the same group. Except for the multiple choice reaction test, there was no difference in cognitive reaction test results between the two groups. The elderly drivers made more errors though they did not differ from the younger drivers in reaction times. At the simulated driving task the reaction time of the elderly driver was longer than that of the younger; however, the driving speed of the elderly was lower and the number of collisions greater. There was a positive correlation (r=.496) between the number of errors in the multiple choice reaction test and the number of collisions in the driving task. Therefore, it was identified that critical attributes contributing to automobile crashes involving elderly drivers included cognitive difficulty in judging and responding to complex situations.

• Journal of the Ergonomics Society of Korea
• /
• v.36 no.2
• /
• pp.87-108
• /
• 2017

Objective: The purpose of this study was to precede the acceptance study based on automation steps and user experience that was lacked in the past study on the core technology of autonomous vehicle, ADAS. The first objective was to construct the acceptance model of ADAS technology that is the core technology, and draw factors that affect behavioral intention through user experience-based evaluation by applying driving simulator. The second one was to see the change of factors on automation step of autonomous vehicle through the UX/UA score. Background: The number of vehicles with the introduction of ADAS is increasing, and it caused change of interaction between vehicle and driver as automation is being developed on the particular drive factor. For this reason, it is becoming important to study the technology acceptance on how driver can actively accept giving up some parts of automated drive operation and handing over the authority to vehicle. Method: We organized the study model and items through literature investigation and the scenario according to the 4 stages of automation of autonomous vehicle, and preceded acceptance assessment using driving simulator. Total 68 men and woman were participated in this experiment. Results: We drew results of Performance Expectancy (PE), Social Influence (SI), Perceived Safety (PS), Anxiety (AX), Trust (T) and Affective Satisfaction (AS) as the factors that affect Behavioral Intention (BI). Also the drawn factors shows that UX/UA score has a significant difference statistically according to the automation steps of autonomous vehicle, and UX/UA tends to move up until the stage 2 of automation, and at stage 3 it goes down to the lowest level, and it increases a little or stays steady at stage 4. Conclusion and Application: First, we presented the acceptance model of ADAS that is the core technology of autonomous vehicle, and it could be the basis of the future acceptance study of the ADAS technology as it verifies through user experience-based assessment using driving simulator. Second, it could be helpful to the appropriate ADAS development in the future as drawing the change of factors and predicting the acceptance level according to the automation stages of autonomous vehicle through UX/UA score, and it could also grasp and avoid the problem that affect the acceptance level. It is possible to use these study results as tools to test validity of function before ADAS offering company launches the products. Also it will help to prevent the problems that could be caused when applying the autonomous vehicle technology, and to establish technology that is easily acceptable for drivers, so it will improve safety and convenience of drivers.