• 한국자동차공학회논문집
• /
• 제5권3호
• /
• pp.106-116
• /
• 1997

In this paper, using MATLAB SIMULINK, a generalized design methodology was suggested for multi pass transmission(MPT) by classifying the vehicle power train as prime mover, MPT and vehicle dynamics. This approach enables a designer to investigate the influence of each transmission component by simple combination of system components without changes of overall program. Using the design methodology, a MPT consisting of CVT, 2, clutches and reduction gears was designed for a braking energy regenerative flywheel hybrid vehicle. The CVT is essential in order to connect the engine and flywheel speed with the vehicle speed. For the purpose of smooth clutch operation, control algorithm was suggested by introducing dead zone for the clutch engagement. Using the SIMULINK model, performance of the flywheel hybrid vehicle with MPT was investigated. It was observed from the simulation results that the MPT vehicle showed better fuel economy, 47% than that of AT vehicle, 27% than that of CVT vehicle for ECE-15 driving cycle. Especially destinct fuel efficiency improvement was obtained for city driving cycle requiring more frequent stop and start.

• 한국자동차공학회논문집
• /
• 제22권4호
• /
• pp.72-81
• /
• 2014

In this study, we perform the optimization of trailing arm bush in a vehicle rear suspension to improve the ride and handling performance. A design problem was formulated considering 2 objective functions and 7 constraints related to vehicle ride and handling performance. PIAnO, one of the PIDO (Process Integration and Design Optimization) tool, was used to automate analysis procedures and perform a design optimization. In order to assess relation between performances and design variables, we perform the DOE (Design of Experiments). To find the optimal solution, we used Progressive quadratic response surface method (PQRSM), one of the design optimization techniques equipped in PIAnO. As an optimization result, we got an optimal solution and could improve lateral force steer off-center by 43.0% while decreasing brake compliance at wheel center by 8.1%.

• 한국항공우주학회지
• /
• 제35권1호
• /
• pp.66-72
• /
• 2007

비행체 설계 접근 방법으로서 무선조종 모형시험 기법 적용 방안을 제시하였다. 본 연구에서 제시된 접근 방법은 동적 상사성을 유지한 축소모형 비행체의 비행특성 분석을 통하여 기본 설계 형상의 타당성을 확인하고 그 결과를 비행체 초기 설계 단계에서 공력 설계 절차에 반영하는 것이다. 축소 비행모형 설계 시 실제적 적용이 가능한 상사 법칙을 개발하기 위하여 비행체 운동을 조종안정성 상사를 위한 회전운동과 비행성능 상사를 위한 병진운동으로 분리하였다. 또한, 무선조종 모형 비행시험을 위한 세부 기법을 개발하였다. 무선조종 비행시험으로부터 얻은 결과를 기초로, 제시된 비행체 설계 접근 방법은 비행체 설계 초기 단계에서 설계 형상 타당성을 확인하는데 유용한 것으로 확인되었다.

• 한국도로학회논문집
• /
• 제15권4호
• /
• pp.177-186
• /
• 2013

PURPOSES: The purpose of this study theoretically reviews vertical grade deriving process in super high speed environment and compares overseas design criteria with Domestic Standardization also draws suitable vertical grade design criteria of high standard for Domestic Circumstances in Korea. METHODS : By researching domestic vehicle registration status, calculating typical vehicle, using Vissim which is traffic simulation program, Speed-distance curve of the vehicle is derived under each design speed condition. Through Speed-distance curve, estimating critical length of grade and considering critical length of grade, maximum longitudinal incline is proposed. RESULTS : The result of domestic vehicle registration status, the typical vehicle for deriving vertical grade is calculated based on gravity horsepower ratio 200 lb/hp. For calculating critical length of grade, according to change speed of uphill entry, speed-distance curve is derived by using Vissim. Critical length of grade is calculated based on design speed 20 km/h criteria which is point of retardation. Estimated critical length of grade is 808 m and based on this result, maximum longitudinal incline was confirmed in the design speed between 130km/h to 140km/h. CONCLUSIONS: The case of the typical vehicle(truck) which is gravity horsepower ratio 200 lb/hp, maximum longitudinal incline 2% is desirable at the super high speed environment in the design speed between 130km/h to 140km/h.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.45-47
• /
• 2003

This paper presents the design results and characteristics analysis of SRM for vehicle power supply. For Adaptable design of the SRM, Variable design parameters, such as stator and rotor laminations, winding details, pole numbers, and pole arcs, phases numbers are required. So, in this paper the SRM design results and the comparison of characteristics for vehicle power supply as phases changed are described.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(2)
• /
• pp.981-984
• /
• 2004

This paper presents the design results and characteristic analysis of SRM. For vehicle power supply for adaptable design of the SRM, variable design parameters, such as stator and rotor laminations, winding details, pole numbers, and pole arcs, phases numbers are required. So, in this paper the SRM design results and the comparison of characteristics for vehicle power supply as phases changed are described.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1999년도 춘계학술대회 논문집
• /
• pp.83-94
• /
• 1999

This study is about design of vehicle for air tightness to pressure waves of high speed train. When the train runs to high speed over 300km/h, the comfort of passenger come down due to difference pressure between inside and outside of passenger room. The car-body was carried out the design of air-tightness, and the analysis of inside pressure of vehicle in tunnel by TG_TUN of ALSTOM Co. The result of analysis should be used the design of air pressurized system and car-body of G7 high speed train project.

• 한국자동차공학회논문집
• /
• 제24권3호
• /
• pp.265-272
• /
• 2016

The objective of vehicle aerodynamic design is on the fuel economy, reduction of the harmful emission, minimizing the vibration and noise and the driving stability of the vehicle. Especially for a sedan, the driving stability of the vehicle is the main concern of the aerodynamic design of the vehicle indeed. In this theoretical study, an evaluation algorithm of aerodynamic driving stability of a vehicle was made to estimate the dynamic stability of a vehicle at the given driving condition on a road. For the stability evaluation of a driving vehicle, CFD simulation was conducted to have the rolling, pitching and yawing moments of a model vehicle and compared the values of the moments to the resistance moments. From the case study, it is found that a model sedan running at 100 km/h in speed on a straight level road is stable under the side wind with 45 m/s in speed. But the different results may be obtained on the buses and trucks because those vehicles have the wide side area. From the case study of the model vehicle moving on 100 km/h speed with 15 m/s side wind is evaluated using the numerical algorithm drawn from the study, the value of yawing moment is $608.6N{\cdot}m$, rolling moment $-641N{\cdot}m$ and pitching moment $3.9N{\cdot}m$. These values are smaller than each value of rotational resistance moment the model vehicle has, and therefore, the model vehicle's driving stability is guaranteed when driving 100 km/h with 15 m/s side wind.

• 한국디자인학회:학술대회논문집
• /
• 한국디자인학회 2004년도 춘계 학술발표대회 논문집
• /
• pp.310-311
• /
• 2004

• 전산구조공학
• /
• 제10권3호
• /
• pp.203-216
• /
• 1997

본 논문에서는 실무에서 이동 집중하중에 대한 별도의 복잡한 구조해석을 수행하지 않고도 등분포하중에 대한 부재력으로부터 손쉽게 차량하중의 영향을 고려한 거더와 보 부재의 설계 부재력을 구할 수 있도록 등가차량하중계수를 제안하였다. 먼저 국내에서 생산되는 중,소형 차량의 조사와 외국의 주차장 관련 설계규준의 비교, 검토를 통해 주차장 구조물의 한계 활하중인 총중량 2.4ton의 설계기준차량을 설정하였으며, 이를 토대로 설계 활하중인 등분포하중(500kg/m/sup 2/)과 집중하중(P=2.4ton)에 대한 구조부재의 거동 특성을 분석하고 회귀분석을 통해 상호 관계식을 부재 길이의 함수로 구성하였다. 나아가 제안된 등가차량하중계수를 대표적인 보와 거더 부재에 적용시켜 그 효율성과 신뢰성을 검증하였다.