• Journal of Drive and Control
• /
• v.16 no.3
• /
• pp.67-74
• /
• 2019

The automotive market has recently been investing much time and costs in improving existing technologies such as ABS (Anti-lock Braking System) and TCS (Traction Control System) and developing new technologies. Additionally, various methods have been applied and developed to reduce this. Among them, the development method using the simulation has been mainly used and developed. In this paper, we have studied a method to develop SILS (Software In the Loop Simulation) for TCS which can test various environment variables under the same conditions. We modeled hardware (vehicle engine and ABS module) and software (control logic) of TCS using MATLAB/Simulink and Carsim. Simulation was performed on the climate, road surface, driving course, etc. to verify the TCS logic. By using SILS to develop TCS control logic and controller, it is possible to verify before production and reduce the development period, manpower and investment costs.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.25 no.1
• /
• pp.29-41
• /
• 2021

The PID controller with fin angle and thrust as control input was designed based on the aerodynamic data of scramjet system. Flight simulation following a given trajectory which strike the target point after climb and cruise with constant dynamic pressure was conducted. After that, the required thrust for the climb and cruise was calculated and the required fuel flow rate for the hydrogen fuel dual mode scramjet combustor was analyzed. The combustor analysis of this study which conducted on integrated model of independently developed inlet, combustor, nozzles and external aerodynamic models, laying the foundation for the integrated design of the air breathing hypersonic system.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2022.05a
• /
• pp.531-534
• /
• 2022

승차 공유, 카풀, 렌터카의 이용률이 증가하면서 많은 사용자가 동일한 차량에 로컬 액세스 할 수 있는 시나리오가 더욱 보편화됨에 따라 차량 네트워크에 대한 공격 가능성이 커지고 있다. 차량용 CAN Bus Network에 대한 DoS(Denial of Service), Fuzzy Attack 및 Replay Attack과 같은 공격은 일부 ECU(Electronic Controller Unit) 비활성 및 작동 불능 상태를 유발한다. 에어백, 제동 시스템과 같은 필수 시스템이 작동 불가 상태가 되어 운전자에게 치명적인 결과를 초래할 수 있다. 차량 네트워크 침입 탐지를 위하여 많은 연구가 진행되고 있으나, 기존 화이트리스트를 이용한 탐지 방법은 새로운 유형의 공격이 발생하거나 희소성이 높은 공격일 때 탐지하기 어렵다. 본 논문에서는 인공신경망 기반의 CAN 버스 네트워크 침입 탐지 기법을 제안한다. 제안하는 침입 탐지 기법은 2단계로 나누어 진다. 1단계에서 정상 패킷 분포를 학습한 VAE 모형이 이상 탐지를 수행한다. 이상 패킷으로 판정될 경우, 2단계에서 인코더로부터 추출된 잠재변수와 VAE의 재구성 오차를 이용하여 공격 유형을 분류한다. 분류 결과의 신뢰점수(Confidence score)가 임계치보다 낮을 경우 학습하지 않은 공격으로 판단한다. 본 연구 결과물은 정보보호 연구·개발 데이터 첼린지 2019 대회의 차량 이상징후 탐지 트랙에서 제공하는 정상 및 3종의 차량 공격시도 패킷 데이터를 대상으로 성능을 평가하였다. 실험을 통해 자동차 제조사의 규칙이나 정책을 사전에 정의하지 않더라도 낮은 오탐율로 비정상 패킷을 탐지해 낼 수 있음을 확인할 수 있다.

• Journal of IKEEE
• /
• v.27 no.4
• /
• pp.531-536
• /
• 2023

This paper proposes a sliding window method with frame feature insertion for immediate attack detection on in-vehicle networks. This method guarantees real-time attack detection by labeling based on the attack status of the current frame. Experiments show that the proposed method improves detection performance by giving more weight to the current frame in CNN computation. The proposed model was designed based on a lightweight LeNet-5 architecture and it achieves 100% detection for DoS attacks. Additionally, by comparing the complexity with conventional models, the proposed model has been proven to be more suitable for resource-constrained devices like ECUs.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2024.01a
• /
• pp.279-280
• /
• 2024

본 논문에서는 주행 중 차량의 상태를 실시간으로 모니터링함과 동시에, 페달 조작 여부를 확인할 수 있는 영상 촬영 및 저장 시스템을 제안한다. 개발된 차량 운행 정보 블랙박스는 블루투스 OBD2 커넥터를 통해 차량의 PID 값을 식별하고 수집한다. 이 데이터는 비동기 방식으로 처리되며, 라즈베리파이와 7인치 터치 디스플레이를 이용해 운전자에게 한눈에 보일 수 있는 형태로 정보를 제공한다. 특히, 멀티스레드를 활용하여 ECU 정보를 페달 조작 여부 영상에 표시하는 동시에 녹화하고, CSV 파일로 SD 카드에 실시간으로 저장한다. 수집된 차량 데이터와 영상 데이터는 예기치 못한 사고 발생 시 운전자의 과실 비율 측정과 대처행동을 입증하는 데 중요한 역할을 할 것으로 기대되며, 차량 정비 시 참고 자료로 활용될 수 있다.

• The Journal of Korea Robotics Society
• /
• v.19 no.2
• /
• pp.149-158
• /
• 2024

This paper presents a robust autonomous navigation and reconnaissance system for tracked robots, designed to handle complex multi-floor indoor environments with stairs. We introduce a localization algorithm that adjusts scan matching parameters to robustly estimate positions and create maps in environments with scarce features, such as narrow rooms and staircases. Our system also features a path planning algorithm that calculates distance costs from surrounding obstacles, integrated with a specialized PID controller tuned to the robot's differential kinematics for collision-free navigation in confined spaces. The perception module leverages multi-image fusion and camera-LiDAR fusion to accurately detect and map the 3D positions of objects around the robot in real time. Through practical tests in real settings, we have verified that our system performs reliably. Based on this reliability, we expect that our research team's autonomous reconnaissance system will be practically utilized in actual disaster situations and environments that are difficult for humans to access, thereby making a significant contribution.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.10
• /
• pp.3873-3879
• /
• 2010

Home service robot are not working in the fixed task such as industrial robot, because they are together with human in the same indoor space, but have to do in much more flexible and various environments. Most of them are developed on the base of the wheel-base mobile robot in the same method as a vehicle robot for factory automation. In these days, for holonomic system characteristics, omni-directional wheels are used in the mobile robot. A holonomicrobot, using omni-directional wheels, is capable of driving in any direction. But trajectory control for omni-directional mobile robot is not easy. Especially, azimuth control which sensor uncertainty problem is included is much more difficult. This paper develops trajectory controller of 3-wheels omni-directional mobile robot using fuzzy azimuth estimator. A trajectory controller for an omni-directional mobile robot, which each motor is controlled by an individual PID law to follow the speed command from inverse kinematics, needs a precise sensing data of its azimuth and exact estimation of reference azimuth value. It has imprecision and uncertainty inherent to perception sensors for azimuth. In this paper, they are solved by using fuzzy logic inference which can be used straightforward to perform the control of the mobile robot by means of the fuzzy behavior-based scheme already existent in literature. Finally, the good performance of the developed mobile robot is confirmed through live tests of path control task.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.4
• /
• pp.350-357
• /
• 2017

This study was conducted as a post - study on the development of a centralized controller and a hydraulic lift system including structural analysis and remote control for the development of a vertically elevated car. The safety review was carried out through the structural modification of the elevator lift which was developed during the previous research. 3D modeling was performed with Solidworks, and a model of finite element was created through Hypermesh S / W. In addition, the loading environment of the work vehicle for the evaluation is a condition in which the loading amount is 250 kg per position (total, upper, upper, lower, and lower) on the work table, ), The structural analysis was carried out under the condition that the load was 600 kg, and safety was examined in various aspects. As a result, when the allowable load of 250 kg and the excess load of 600 kg are excluded (except Case-11), the stress level is below the yield strength. In the case of Case-11, there is a region exceeding the yield strength at the center support portion of the safety bar at the upper end even after excluding the component which generates the maximum stress, but it does not affect the safety aspect of the whole structure Respectively. Looking at the deflection results, it can be seen that in all cases the maximum deflection occurs in the same table, and the tendency of sagging in both 250 kg and 600 kg is the same.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.138-142
• /
• 2004

In this paper, we present a new method for monitoring of ECU's sensor signals of vehicle. In order to measure the ECU's sensor signals, the interfaced circuit is designed to communicate ECU and the Embedded Linux is used to monitor communication result through Web the Embedded Linux system and this system is said "ECU Interface Part". In ECU Interface Part the interface circuit is designed to match voltage level between ECU and SA-1110 micro controller and interface circuit to communicate ECU according to the ISO, SAE communication protocol standard. Because Embedded Linux does not allow to access hardware directly in application level, anyone who wants to modify any low level hardware must develop device driver. To monitor ECU's sensor signals the most important thing is to match serial level between ECU and ECU Interface Part. It means to communicate correctly between two hardware we need to match voltage and signal level, and need to match baudrate. The voltage of SA-1110 is 0 ${\sim}$ +3.3V and ECU is 0 ${\sim}$ +12V and, ECU's communication Line K does multiple operation so, the interface circuit is used to match voltage and signal level. In Addition to ECU's baudrate is 10400bps, it's not standard baudrate in computer environment. So, we need to develop a device driver to control the interface circuit, and change baudrate. To monitor ECU's sensor signals through web there's a network socket program is working in Embedded Linux. It works as server program and manages user's connections and commands. Anyone who wants to monitor ECU's sensor signals he just only connect to Embedded Linux system with web browser then, Embedded Linux webserver will return the ActiveX webbased measurement software. It works in web browser and inits ECU, as a result it returns sensor signals through web. All the programs are developed with GCC(GNU C Compiler) and, webbased measurement software is developed with Borland C++ Builder.

• Journal of Biosystems Engineering
• /
• v.41 no.2
• /
• pp.126-137
• /
• 2016

Purpose: The overall objective of this study was to evaluate the vegetation fraction of soybeans, grown under different cropping conditions using an unmanned aerial vehicle (UAV) equipped with a red, green, and blue (RGB) camera. Methods: Test plots were prepared based on different cropping treatments, i.e., soybean single-cropping, with and without herbicide application and soybean and barley-cover cropping, with and without herbicide application. The UAV flights were manually controlled using a remote flight controller on the ground, with 2.4 GHz radio frequency communication. For image pre-processing, the acquired images were pre-treated and georeferenced using a fisheye distortion removal function, and ground control points were collected using Google Maps. Tarpaulin panels of different colors were used to calibrate the multi-temporal images by converting the RGB digital number values into the RGB reflectance spectrum, utilizing a linear regression method. Excess Green (ExG) vegetation indices for each of the test plots were compared with the M-statistic method in order to quantitatively evaluate the greenness of soybean fields under different cropping systems. Results: The reflectance calibration methods used in the study showed high coefficients of determination, ranging from 0.8 to 0.9, indicating the feasibility of a linear regression fitting method for monitoring multi-temporal RGB images of soybean fields. As expected, the ExG vegetation indices changed according to different soybean growth stages, showing clear differences among the test plots with different cropping treatments in the early season of < 60 days after sowing (DAS). With the M-statistic method, the test plots under different treatments could be discriminated in the early seasons of <41 DAS, showing a value of M > 1. Conclusion: Therefore, multi-temporal images obtained with an UAV and a RGB camera could be applied for quantifying overall vegetation fractions and crop growth status, and this information could contribute to determine proper treatments for the vegetation fraction.