• Journal of Korean Society of Transportation
• /
• v.25 no.6
• /
• pp.185-196
• /
• 2007

The aim of this research is to develop a signal control algorithm using internal metering to minimize total delay that vehicles go through, in case a network is oversaturated. To calculate total delay on the network, the authors first detect vehicles' arrivals and departures in the network through the detecting system, and chase the vehicles' flow in the links with a platoon dispersion model. Following these, the authors calculate the queue length in all the inks of the network through the chase of vehicles, deduce the stopped time delay, and finally convert the stopped time delay to the approach delay with a time-space diagram. Based on this calculated delay, an algorithm that calculates the level of the internal metering necessary to minimize the deduced approach delay is suggested. To verify effectiveness of this suggested algorithm, the authors also conduct simulation with the micro-simulator VISSIM. The result of the simulation shows that the average delay per vehicle is 82.3 sec/veh and this delay is lower than COSMOS (89.9sec/veh) and TOD (99.1sec/veh). It is concluded that this new signal control algorithm suggested in this paper is more effective in controlling an oversaturated network.

• Journal of the Korean Institute of Gas
• /
• v.15 no.5
• /
• pp.50-56
• /
• 2011

A preliminary experimental study of new concept air hybrid engine, which stores compressed air in the tank during braking and re-use it to propel vehicle during crusing or acceleration, was carried out in this study. A single cylinder engine was modified to realize the concept of air hybrid engine. Independent variable valve lift system was adopted in one of the exhaust valves to store the compressed air into the air tank during compression period. An air injector module was installed in the place of spark plug, and the stored compressed air was supplied during the expansion period to realize air motoring mode. For air compression mode, the tank with volume of 30 liter could be charged up to more than 13 bar. By utilizing this stored compressed air, motoring work of 0.41 bar of IMEP(Indicated mean effective pressure) at maximum can be generated at the 800rpm conditions, which is higher than the case of normal idle condition by 1.1 bar of IMEP.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.4
• /
• pp.350-357
• /
• 2017

This study was conducted as a post - study on the development of a centralized controller and a hydraulic lift system including structural analysis and remote control for the development of a vertically elevated car. The safety review was carried out through the structural modification of the elevator lift which was developed during the previous research. 3D modeling was performed with Solidworks, and a model of finite element was created through Hypermesh S / W. In addition, the loading environment of the work vehicle for the evaluation is a condition in which the loading amount is 250 kg per position (total, upper, upper, lower, and lower) on the work table, ), The structural analysis was carried out under the condition that the load was 600 kg, and safety was examined in various aspects. As a result, when the allowable load of 250 kg and the excess load of 600 kg are excluded (except Case-11), the stress level is below the yield strength. In the case of Case-11, there is a region exceeding the yield strength at the center support portion of the safety bar at the upper end even after excluding the component which generates the maximum stress, but it does not affect the safety aspect of the whole structure Respectively. Looking at the deflection results, it can be seen that in all cases the maximum deflection occurs in the same table, and the tendency of sagging in both 250 kg and 600 kg is the same.

• Journal of Preventive Medicine and Public Health
• /
• v.51 no.3
• /
• pp.163-168
• /
• 2018

Objectives: Due to their developmental characteristics, adolescents have a higher probability than other age groups of experiencing injuries caused by accidents, violence, and intentional self-harm. The severity and characteristics of injuries vary by the intentionality and mechanism of injury; therefore, there is a need for a national-level estimate of the scale and the severity of injuries in adolescents that takes these factors into account. Methods: By using data from the Emergency Department-based Injury In-depth Surveillance Data, National Emergency Department Information System, the Korean National Hospital Discharge In-depth Injury Survey, and cause of death statistics, we calculated the emergency department (ED) visit rate, hospitalization rate, and death rate of injuries per 100 000 adolescents for each injury mechanism. The calculated rates were used to generate the injury pyramid ratio (ratio of death rate to hospitalization rate to ED visit rate) to visualize the scale and the severity of the injury. Results: The mortality rate in adolescents due to injury was 10/100 000; the corresponding rates for hospitalization and ED visits were 1623 and 4923, respectively, resulting in an injury pyramid ratio with the general pyramid form, with a 1:162:492 ratio of deaths to hospitalizations to ED visits. The mortality rate due to suicide/intentional self-harm was 5/100 000, while 35 were hospitalized for this reason and 74 made ED visits. The pyramid ratio of 1:7:15 for intentional self-harm/suicide showed a steep pyramidal form, indicating considerable lethality. The mortality rate due to motor vehicle collisions (MVCs) was 3/100 000; 586 were hospitalized for this reason, while 1023 made ED visits. The pyramid ratio of 1:195:341 for MVCs showed a gradual pyramid form, indicating that the lethality was low and the scale of injury was high. Conclusions: The main categories of injuries in adolescents were visualized in pyramid form, contributing to an understanding of the scale of each injury by mechanism in terms of levels of death, hospitalization, and ED visits. These findings will be helpful for understanding how to prioritize injuries in adolescents.

• Journal of the Korean Society of Groundwater Environment
• /
• v.7 no.1
• /
• pp.55-58
• /
• 2000

Methyl tertiary butyl ether (MTBE) is a gasoline additive that boosts the oxygen content in fuel (an oxygenate), resulting in less air-polluting carbon monoxide being released from vehicle exhaust systems. Then, groundwater contamination problems have been developed in areas where the chemical is used. Common sources of water contamination by MTBE include leaking underground gasoline storage tanks and leaks and spills from above ground fuel storage tanks, etc.. Studies on the chemical and these problems are going on abroad vigorously. These studies should be performed in our country as well more actively. This paper reviews on articles on these studies and focuses on the identification of the chemical as a groundwater contamination source.

• Journal of Korean Society of Transportation
• /
• v.20 no.3
• /
• pp.17-30
• /
• 2002

Incident duration prediction is one of the most important steps of the overall incident management process. An accurate and reliable estimate of the incident duration can be the main difference between an effective incident management operation and an unacceptable one since, without the knowledge of such time durations, traffic impact can not be estimated or calculated. This research presents several multiple linear regression models for incident duration prediction using data consisting of 384 incident cases. The main source of various incident cases was the Traffic Incident Reports filled out by the Motorist Assistant Units of the Korea Highway Corporation. The models were proposed separately according to the time of day(daytime vs. nighttime) and the fatality/injury incurred (fatality/injury vs. property damage only). Two models using an integrated dataset, one with an intercept and the other without it, were also calibrated and proposed for the generality of model application. Some findings are as follows ; ?Variables such as vehicle turnover, load spills, the number of heavy vehicles involved and the number of blocked lanes were found to significantly affect incident duration times. ?Models, however, tend to overestimate the duration times when a dummy variable, load spill, is used. It was simply because several of load spill incidents had excessively long clearance times. The precision was improved when load spills were further categorized into "small spills" and "large spills" based on the size of vehicles involved. ?Variables such as the number of vehicles involved and the number of blocked lanes found not significant when a regression model was calibrated with an intercept. whereas excluding the intercept from the model structure signifies those variables in a statistical sense.

• Journal of Korean Society of Transportation
• /
• v.32 no.3
• /
• pp.218-226
• /
• 2014

This study examines a way to install a crosswalk that can improve pedestrians' convenience and safety and that goes beyond the crosswalk design standard of existing roundabouts. When a scrambled crosswalk, one of the crosswalk installation methods, is introduced to the roundabout system, it shortens the cross-walking distance of pedestrians and thus enhances convenience. Although the installation of a scrambled crosswalk may enhance pedestrians' convenience, it may obstruct vehicular traffic. Thus, this study presents standards for reasonable diagonal crosswalk installation based on the investigation on its effects on a vehicle's delay time. This study includes an analysis of the various geometric structures of roundabouts. The study results show that as v/c and the number of pedestrians increased, the delay time after the installation of a scrambled crosswalk increased although the extent was different. In general, the effect of the installation of a scrambled crosswalk was insignificant regardless of the number of pedestrians when v/c was under 0.6. When the number of pedestrians was 300/hour or lower, the difference in the delay time was quite insignificant regardless of v/c. In addition, as the inscribed circle of the roundabout was larger, the difference in the delay time decreased depending on v/c and the number of pedestrians.

• Journal of Energy Engineering
• /
• v.22 no.2
• /
• pp.175-183
• /
• 2013

For the optimal design of the vehicle electric system, it is important to have a reliable modeling tool to predict the dynamic behavior of the automotive battery. In this work, a one-dimensional modeling was carried-out to predict the dynamic behaviors of a 12-V automotive lead-acid battery. The model accounted for electrochemical kinetics and ionic mass transfer in a battery cell. In order to validate the modeling, modeling results were compared with the experiment data of the dynamic behaviors of the lead-acid batteries of two different capacities that were mounted on the automobiles manufactured by Hyundai Motor Company. The discharge behaviors were measured with various discharge rates of C/3, C/5, C/10, C/20 and combination. And dynamic behaviors of charge and discharge were measured. The voltage curves from the experiment and simulation were in good agreement. Based on the modeling, the distributions of the electrical potentials of the solid and solution phases, and the current density within the electrodes could be predicted as a function of charge and discharge time.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.33 no.5
• /
• pp.343-351
• /
• 2015

It is well-known that even the DGNSS (Differential Global Navigation Satellite System) technique in navigation for ground vehicles can only provide several meters of accuracy, such that it is suitable for simple guidance. On the other hand, centimeter to millimeter level accuracy can be obtained by using carrier phase observables in the field of precision geodesy/surveying. In this study, a preliminary study was conducted to apply NRTK (Network-RTK) by NGII (National Geographic Information Institute) to ground vehicle navigation. Onboard GNSS receivers were used for NRTK throughout the country, and the applicability of NRTK on navigation was analyzed based on NRTK surveying results. The analysis shows that the overall ambiguity fixing rate of NRTK is high and is therefore possible to apply it for navigation. In urban areas, however, the fixing rate decreases sharply, therefore, it needs to employ a method to minimize the effect of the float solutions, which can reach up to 10 meters. It is still feasible to obtain a centimeter level of accuracy in some area using NRTK under certain conditions. But, the ambiguity fixing rate of FKP falls down to 55% for high speed vehicles, and so the surveying accuracy should be determined by considering various factors of surveying environments. In addition, it is difficult to fix ambiguities using single-frequency GPS receivers. Finally, several suspicious NRTK(FKP) connection problems occurred during atmospheric disturbances (phase two or up), which should be investigated further in upcoming research.

• Environmental and Resource Economics Review
• /
• v.20 no.3
• /
• pp.595-628
• /
• 2011

This study investigates the issues and suggests reform measures in applying CV methods to the Korea Development Institute's (KDI's) Preliminary Feasibility Test (PFT) of public projects. Most public projects on culture, science and environment evaluated under the PFT system belong to the category of "nonstandard" projects whose outputs are non-marketed, and CV is currently the main tool used for their benefit estimation. A careful discussion and investigation is recommended for the selection of target population, payment vehicle, and number of payment times. Operating expert reviews, focus group interviews, and pre-tests is highly recommended to reduce the potential bias involved in the CV studies. A single or double bounded dichotomous choice format is the most popular design of questionnaire, but we identify several undissolved issues in designing and implementing the format. Some other forms of inducing WTPs may still deserve our consideration. Various specifications of the WTP function need to be tried and tested based on their stability, in particular. Employing a nonparametric approach is also recommended. Treatments of 0 or negative WTPs and protest bids are shown to be the most serious issues that affect the estimation results significantly. We review diverse measures of handling those issues and summarize their advantages and shortcomings.