• 한국자동차공학회논문집
• /
• 제18권6호
• /
• pp.14-22
• /
• 2010

In this study, a large bus is tested for measuring the steering response based on the slarom test and step steer test. A full car model by using ADAMS/Car is established for computer simulation. For bus modeling, user defined templates are made and used in the simulation. Simulation results according to the slarom and step steer test are compared to the physical experiments, in which several sensors are installed to measure vehicle responses. The results obtained from the comparison show a good agreement with regard to the vehicle velocity and steering angle.

• 한국산학기술학회논문지
• /
• 제15권9호
• /
• pp.5480-5486
• /
• 2014

조향계 엔지니어들에게 전동 조향 시스템의 시뮬레이션 및 분석을 위한 새로운 방식의 소프트웨어를 소개한다. 이 소프트웨어 MSAS는 전동 조향 시스템의 시뮬레이션, 분석 및 종합 기능을 제공하며, 기본적으로 조향계 모델과 차량모델 및 제어로직에 기초한다. 부품 공급회사들은 제어로직을 블랙박스 형태로 제공하기 때문에 이 소프트웨어는 로직 설계자의 의도에 따라 블랙박스 형태이든지 또는 화이트박스 형태이든지 모두 사용가능하다. 또한 이 소프트웨어는 공급회사들의 에스함수 제어로직 및 RMDPS와 함께 통합될 수 있다.

• 한국철도학회논문집
• /
• 제2권2호
• /
• pp.31-38
• /
• 1999

Two representative types of the AGT (Automated Guideway Transit) system, which are bogie and steering types, are available for the side-guided system. Each system primarily consists of the bogie frame, suspensions, wheelsets and axles, braking system and transmission system. Among these components, the bogie frame is one of the most significant components subjected to the whole vehicle and passenger loads. This paper describes structural analyses and associated fatigue analyses for each bogie frame depending on the various loading conditions on a basis of the railway vehicle code UIC 515-4. Subsequently, comparisons are made between those two types to estimate which type is more reliable in terms of strength and fatigue. It is observed that the bogie type is a little advantageous over the steering one from the strength analysis. However, the two types are found to be in a reliable range of fatigue even though a realistic fatigue load case is further carried out. In addition, an optimal size of thickness is suggested for designs of the bogie frame.

• 한국지능시스템학회논문지
• /
• 제24권1호
• /
• pp.33-39
• /
• 2014

자동 주행 차량을 구현하기 위해서는 장애물 인식, 차선 인식 및 변경 등 많은 기능들이 필요하다. 본 논문에서는 자동차 주행에 필요한 '차선 인식'의 범위를 확장시킨 '색깔 인식' 개념을 도입 적용시키기 위해 3가지 코스를 주행하는 시스템을 구현하였다. RC car의 크기와 비례하게 축소 제작한 각 코스에서 주행에 필요한 검지선의 위치, 기울기 및 차량의 속도를 고려하여 조향 제어를 하였고, 브레이크 기능이 없는 RC car를 제어하기 위해 차량의 속도와 검지선의 위치를 고려하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.131-134
• /
• 1997

This paper presents a new approach to the design of intelligent control system for track vehicle system using fuzzy logic based on neural network. The proposed control scheme uses a Gaussian function as a unit function in the neural network-fuzzy, and back propagation algorithm to train the fuzzy-neural network controller in the framework of the specialized learning architecture. It is proposed a learning controller consisting of two neural network-fuzzy based on independent reasoning and a connection net with fixed weights to simply the neural networks-fuzzy. The performance of the proposed controller is illustrated by simulation for trajectory tracking of track vehicle speed.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2013년도 추계학술대회 논문집
• /
• pp.69-70
• /
• 2013

By using differential force between left and right wheel, lateral motion can be controlled known as Direct Yaw-moment Control (DYC). In previous researches, DYC control is proposed to increase the stability of the vehicle, but maneuverability has not been discussed sufficiently. The car handling condition which is called the index parameter of maneuverability is dependent on the vehicle velocity and steering angle. To achieve the desired vehicle's cornering path, the car handling condition must be considered sufficiently. In this paper, the novel DYC method is proposed which gives the car handling condition regardless of the longitudinal speed. The proposed controller is based on the PI controller to feedback the curvature parameter. The controlled system shows the advantages of DYC regarding to the reference trajectory by the dual motor system. With respect to the uncontrolled model, the effectiveness of the proposed method is validated by numerical examples.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1997년도 추계학술대회 논문집
• /
• pp.70-75
• /
• 1997

This paper proposes a new approach to the design of fuzzy-neuro control for track vehicle system using fuzzy logic based on neural network. The proposed control scheme uses a Gaussian function as a unit function in the neural network-fuzzy, and back propagation algorithm to train the fuzzy-neural network controller in the framework of the specialized learning architecture. It is proposed a learning controller consisting of two neural network-fuzzy based of independent reasoning and a connection net with fixed weights to simply the neural networks-fuzzy. The performance of the proposed controller is illustrated by simulation for trajectory tracking of track vehicle speed.

• International Journal of Automotive Technology
• /
• 제7권7호
• /
• pp.813-819
• /
• 2006

As the vehicle becomes bigger and faster, the importance of vehicle stability in an extreme driving condition caused by sudden steering, road condition or unexpected case has been emphasized. The ESP system is being utilized to improve the handling performance and the vehicle stability. In this study, we implemented various tests and proposed estimation methods for ESP characteristics in extreme driving situations. The estimation methods for ESP proposed in this paper are expected to facilitate developing the control logic and improving the performance of the ESP system.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.369-374
• /
• 2007

This paper presents yaw vibration control performances of railway vehicle featuring controllable magnetorheological damper. A cylindrical type of MR damper is devised and its damping force is evaluated by considering fluid resistance and MR effect. Design parameters are determined to achieve desired damping force level. The MR damper model is then incorporated with the governing equations of motion of the railway vehicle which includes vehicle body, bogie and wheel-set. Subsequently, computer simulation of vibration control via proportional-integral-derivative (PID) controller is performed using Matlab. Various control performances are demonstrated under external excitation by creep force between wheel and rail.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1460-1463
• /
• 2005

In this paper, analysis of magnetic marker for autonomous vehicle guidance system using 3-axis magnetic sensor propose. Position sensing is an important an estimation system of vehicle position and orientation on magnetic lane, which is a parameter of the steering controller for automated lane following is described. To verify that the magnetic dipole model could be applied to a magnetic unit paved in roadway, the analysis of the data 3-axis magnetic field measured experimentally.