• International Journal of Aeronautical and Space Sciences
• /
• 제18권4호
• /
• pp.623-640
• /
• 2017

The full nonlinear equations of an unmanned aerial vehicle ground taxiing mathematical dynamic model are built based on a type of unmanned aerial vehicle data in LMS Virtual.Lab Motion. The flexible landing gear model is considered to make the aircraft ground motion more accurate. The electric braking control system is established in MATLAB/Simulink and the experiment of it verifies that the electric braking model with the pressure sensor is fitted well with the actual braking mechanism and it ensures the braking response speediness. The direction rectification control law combining the differential brake and the rudder with 30% anti-skid brake is built to improve the directional stability. Two other rectifying control laws are demonstrated to compare with the designed control law to verify that the designed control is of high directional stability and high braking efficiency. The lateral displacement increases by 445.45% with poor rectification performance under the only rudder rectifying control relative to the designed control law. The braking distance rises by 36m and the braking frequency increases by 85.71% under the control law without anti-skid brake. Different landing conditions are simulated to verify the good robustness of the designed rectifying control.

• 한국산학기술학회논문지
• /
• 제14권4호
• /
• pp.1555-1560
• /
• 2013

칼럼 타입의 전동조향장치(MDPS) 시스템은 차량 안전성과 연료 효율 향상을 보장하기에 승용차에 보편적으로 장착하고 있다. 시스템 해석과 제어기 개발을 위해서는 보통 Mechanical Simulation사에서 제작한 CarSim 프로그램과 매트랩 시뮬링크의 두 프로그램을 이용하여 제어 알고리즘과 차량 모델이 결합되어 하나의 시스템처럼 동시에 동작하도록 시뮬레이션을 수행한다. 매트랩 시뮬링크의 MDPS 제어 시스템과 완전 차량 모델의 동시시뮬레이션 기술개발에 대한 구체적이 방법이 소개된 적이 없기에 본 연구에서 상세히 소개하기로 한다. 본 연구에서는 사인 파형의 조향핸들입력을 이용한 시뮬레이션 결과가 보여 지고 실험결과와 잘 비교되었다. 이러한 동시시뮬레이션 기술은 차량의 핸들링 성능 평가나 CMDPS 평가 수행 및 로직 튜닝을 위해 효과적으로 사용될 수 있다.

• 한국소음진동공학회논문집
• /
• 제18권3호
• /
• pp.299-306
• /
• 2008

The electromagnet in Maglev vehicles controls the voltage in its winding to maintain the air gap, a clearance between the electromagnet and guideway, within an allowable deviation, with strongly interacting with the flexible guideway. Thus, the vibration characteristics of guideway plays important role in dynamics of Maglev vehicles using electromagnet as an active suspension system. The effects of the guideway's vibrational characteristics on dynamics of the Maglev vehicle UTM-01 are analyzed. The coupled equations of motion of the vehicle/guideway with 3 DOFs are derived. Eigenvalues are calculated and frequency response analysis is also performed for a clear understanding of the dynamic characteristics due to guideway vibration characteristics. To verify the results, tests of the urban Mgalev vehicle UTM-02 are carried out. It is recommended that the natural frequency of the guideway be minimized and its damping ratio in the Maglev vehicle with a 5-states feedback control law as a levitation control law.

• 한국정밀공학회지
• /
• 제31권9호
• /
• pp.759-764
• /
• 2014

Lateral force of wheel is important parameter when we evaluate the safety of a railway vehicle on curved track. The lateral force of wheel is influenced by the steering performance of wheelsets. Generally, in passive type vehicles, the steering performance of wheelsets is influenced by the parameters like primary spring stiffness, wheel base, conicity of the wheel profile, etc. But, the steering performance of passive type vehicle has its limit. To overcome the limit of the steering performance of passive type vehicle, active steering technology is being developed. In this paper, we analyze the lateral force of wheel and the safety of the railway vehicle on curved track by adopting the active steering technology. As results of dynamic analysis for vehicle model equipped with active steering system, the lateral force of wheel is reduced and the safety is improved remarkably.

• Journal of Power Electronics
• /
• 제11권4호
• /
• pp.471-478
• /
• 2011

This paper addresses the establishment of a kVA-range plug-in hybrid electrical vehicle (PHEV) integration test platform and associated issues. Advancements in battery and power electronic technology, hybrid vehicles are becoming increasingly dependent on the electrical energy provided by the batteries. Minimal or no support by the internal combustion engine may result in the vehicle being occasionally unable to recharge the batteries during highly dynamic driving that occurs in urban areas. The inability to sustain its own energy source creates a situation where the vehicle must connect to the electrical grid in order to recharge its batteries. The effects of a large penetration of electric vehicles connected into the grid are still relatively unknown. This paper presents a novel methodology that will be utilized to study the effects of PHEV charging at the sub-transmission level. The proposed test platform utilizes the power hardware-in-the-loop (PHIL) concept in conjunction with high-fidelity PHEV energy system simulation models. The battery, in particular, is simulated utilizing a real-time digital simulator ($RTDS^{TM}$) which generates appropriate control commands to a power electronics-based voltage amplifier that interfaces via a LC-LC-type filter to a power grid. In addition, the PHEV impact is evaluated via another power electronic converter controlled through $dSPACE^{TM}$, a rapid control systems prototyping software.

• 한국철도학회논문집
• /
• 제17권5호
• /
• pp.336-341
• /
• 2014

기차나 군용 트럭 등에 이용되던 굴절차량이 승객의 대량 수송을 위하여 일반 도로에 적용이 검토되고 있다. 레일을 따라가지 않고 일반 도로에서 주행하는 굴절차량은 회전반경, 차량 선회 폭, 이탈궤적, 스윙아웃등 다양한 제어 요소를 갖는다. 현재 승객 수송을 목적으로 제작되는 굴절차량은 각 바퀴에 하나의 모터를 장착하고 구동하는 독립 구동 방식을 채택하고 있으며, 각 바퀴의 독립 제어를 통하여 차량의 빠르고 정확한 자세제어가 가능하다. 이 논문에서는 여러 제어 요소 중 굴절차량의 최초 목적인 회전반경 감소를 위한 토크 분배 알고리즘을 제안하고, 시뮬레이션을 통하여 회전 반경이 감소함을 검증하였다.

• 한국철도학회논문집
• /
• 제4권1호
• /
• pp.1-8
• /
• 2001

In this paper, the dynamics and stability of the automated guideway transit (AGT) vehicles with rubber tires are investigated. Two types of AGT systems are considered: the bogie-type and steering-type systems. The critical speeds for the dynamic instability of lateral and yawing motions are investigated by use of the Routh-Hurwitz's stability criterion. It is shown that the bogie-type AGT vehicles are likely to be stable within the range of practical operating speed, whereas it is not true for the steering-type AGT vehicles. It is also shown that the control performance of steering-type AGT vehicles can be improved by choosing proper steering gains of the closed-loop steering control system.

• 대한기계학회논문집A
• /
• 제35권8호
• /
• pp.905-912
• /
• 2011

견마로봇이 야지 노면에서 주행할 때 로봇에 설치되어 있는 각종 장비의 보호를 위하여 주행 안정성을 높이는 것이 중요하다. 견마로봇의 주행 안정성을 평가하는 데에 있어서 차체의 수직 가속도, 롤 각가속도, 피치 각가속도의 영향이 지배적이다. 가속도가 발생한다는 의미는 차체에 그만큼의 힘이 가해진다는 것을 의미한다. 따라서 차체에 작용하는 힘의 크기를 조절함으로써 차량의 안정성을 향상시킬 수 있다. 차량의 안정성을 높이기 위한 하나의 방법으로 MR 댐퍼와 스카이 훅 제어기법을 적용할 수 있다. 본 연구에서는 $6{\times}6$ 견마로봇에 대하여 MR 댐퍼에 스카이 훅 제어기법을 적용하였으며, 수직 가속도 및 롤, 피치 각가속도를 줄이는 방향으로 제어하여 차량의 주행 안정성을 향상시켰다.

• Journal of Power Electronics
• /
• 제6권4호
• /
• pp.322-329
• /
• 2006

In the last decade, the increasing restrictions imposed on the exhaust emissions from internal combustion engines and traffic limitations have increased the development of electrical propulsion systems for automotive applications. The goal of electrical and hybrid vehicles is the reduction of global emissions, which in turn leads to a decrease in fuel resource exploitation. This paper presents a novel approach for control of Induction Motors (IM) using the Particle Swarm Optimization (PSO) algorithm to optimize the parameters of the Proportional Integral Controller (PI-Controller). The overall system is simulated under various operating conditions. The use of PSO as an optimization algorithm makes the drive robust and insensitive to load variation with faster dynamic response and higher accuracy. The system is tested under variable operating conditions. The simulation results show a positive dynamic response with fast recovery time.

• 제어로봇시스템학회논문지
• /
• 제7권8호
• /
• pp.697-702
• /
• 2001

The ring laser gyro(RLG) has been used extensively in strapdown inertial navigation system(SDINS) because of the apparent of having wide dynamic range, digital output and high accuracy. The dithered RLG system has dynamic motion at sensor level, caused by the dithering motion to overcome the lock-in threshold. In this case, an attitude error is produced by not only the true coning of the vehicle motion but also the pseudo coning of the sensor motion. This paper describes the definition of the multi-frequency coning motion and its noncommutativity error to reject the pseudo coning error produced by the sensor motion such as the dithered RLG. The simulation results are presented to minimize the multi-frequency coning error.