• Journal of Korea Society of Digital Industry and Information Management
• /
• v.10 no.1
• /
• pp.73-79
• /
• 2014

In this study, the unmanned vehicle to develop a preliminary step, we were facilities for Automated Guided Vehicle (AGV) simulator is designed and implemented. Industry is increasingly the more advanced automation and management systems need to be efficient. These studies are at least 24-hour continuous unmanned vehicles and personnel can result in reduction of labor costs. In addition, safety accidents can be minimized in the industry as an effect of intelligent AGV is essential. This study is the initial step for the development of AGV. manufactured simulator to Simulation and drives the performance of the system is evaluated. The configuration of the simulator, ultrasonic sensors, infrared sensors, and using the obstacle were to follow a given path. In addition, two-way communication between the host computer and the main processor that was. communication method that IEE802.11 meets the standard is applied to high-speed wireless LAN systems, each of the sensor information is calculated. AGV having a drive shaft 4 of the four wheels are respectively independent structure. AGV's main processor is driven using a high-performance DSP, and the controller controls the steering device of the load could be significantly reduced.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.8
• /
• pp.719-724
• /
• 2012

A traffic detection system is a device that collects traffic information around an intersection. Most existing traffic detection systems provide very limited traffic information for signal control due to the restriction of vehicle detection area. A signal control scheme determines the transition among signal phases and the time that a phase lasts for. However, the existing signal control scheme do not resolve the traffic congestion effectively since they use restricted traffic information. In this paper, a new traffic detection system with a zone division signal control scheme is proposed to provide correct and detail traffic information and decrease the vehicle's waiting time at the intersection. The traffic detection system obtains traffic information in a way of vehicle-to-roadside communication between vehicles and sensor network. A new signal control scheme is built to exploit the sufficient traffic information provided by the proposed traffic detection system efficiently. Simulation results show that the proposed signal control scheme has 121 % and 56 % lower waiting time and delay time of vehicles at an intersection than other fuzzy signal control scheme.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.11
• /
• pp.1647-1654
• /
• 2013

Detection performance of the vehicle on the road depends on weather conditions, the shadow by the movement of the sun, or illumination changes, etc. In this paper, a vehicle detection system in conjunction with a robust background estimate algorithm to environment change on the road in daytime is proposed. Gaussian Mixture Model is applied as background estimation algorithm, and also, Adaboost algorithm is applied to detect the vehicle for candidate region. Through the experiments with input videos obtained from a various weather conditions at the same actual road, the proposed algorithm were useful to detect vehicles in the road.

• International Journal of Internet, Broadcasting and Communication
• /
• v.15 no.1
• /
• pp.140-144
• /
• 2023

In recent years, there are so many serious crashes involving coaches, especially the frontal collision occupies 40% of the front of the vehicle, Frontal collisions account for 100% of the front of the vehicle affecting the driver and side-impact collisions that injure the person in the vehicle. Therefore, the research into improving and optimizing the structure is necessary for risk of injury for passengers in frontal accidents. In this paper, we have designed a Shock absorber that can absorb collision energy. Research using HYPERMESH software. to build the finite element model and calculate the meshing to suit the mesh size of 5mm. apply LS-DYNA software to calculate structural strength. In the study, for a vehicle to collide with a hard obstacle occupying 100% of the head of the vehicle. Then, the experimental design method, Minitab is used for find the structural parameters in the design. Improvement results showed that the acceleration of the impact on passengers and the driver is decreased by 55,17%. The mass of texture improvements is reduced by 11%, according to the requirements of European Standards ECE R94.

• Journal of Advanced Navigation Technology
• /
• v.22 no.3
• /
• pp.213-219
• /
• 2018

In this paper, we propose a design method and process for hardware and software of hybrid V2X communication module that supports both C-ITS communication protocol designed for vehicle environment and Legacy LTE communication technology. C-ITS is suitable for safety service applications due to its low latency characteristics, and Legacy LTE is a technology suitable for non-safety applications such as traffic information and infotainment due to high latency and high capacity. The hybrid V2X communication module supports multiple communication technologies of WAVE and LTE, in which WAVE supports multiple channels, so that it is designed to transmit road information such as LDM and positioning correction information to an autonomous vehicle in real time. The main design results presented in this paper will be applied to the implementation of future hybrid V2X communication terminals for vehicles.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2198-2202
• /
• 2003

The data transmission of MVB(Multifunction Vehicle Bus) of TCN(Train Network Communication) is divided into the periodic transmission phase and the sporadic transmission phase. TCN standard defines the event-polling method for the message transfer in the sporadic phase. However, since the event-polling method does not use pre-scheduling to the priority of the messages to be transmitted, it is inefficient for the real-time systems. To schedule message transmission, a master node should know the priority of message to be transmitted by a slave node prior to the scheduling the sporadic phase, but the existing TCN standard does not support any protocol for this. This paper proposes the slave frame bit-stuffing algorithm, with which a master node gets the necessary information for transmission scheduling and includes the simulation results of the event-polling method and the proposed algorithm.

• Journal of the Korea Convergence Society
• /
• v.1 no.1
• /
• pp.49-55
• /
• 2010

As the developing of the information communication technology, more and more devices are with the capacity of communication and networking. The convergence businesses which communicate with the devices have been developing rapidly. The IT convergence communication is viewed as one of the next frontiers in wireless communications. In this paper, we analyze detailed security threats against M2M(Machine to Machine), intelligent vehicle, smart grid and u-Healthcare in IT convergence architecture. We proposed a direction of the IT convergence security that imbedded system security, forensic security, user authentication and key management scheme.

• Journal of Korea Multimedia Society
• /
• v.20 no.9
• /
• pp.1519-1526
• /
• 2017

The existing DSRC(Dedicated Short Range Communication) scheme has a limitation in providing various services through short-range wireless communication. Therefore, it is necessary to develop an intelligent WAVE/DSRC hybrid wireless platform that can improve data transmission speed and extend the effective communication range. This paper introduces WAVE/DSRC integrated platform technology using WAVE(Wireless Access in Vehicle Environments) to overcome the disadvantages of DSRC. First, the desinged software configuration of the WAVE/DSRC integrated platform is described. Then each task operation scheme and WAVE software design are described. By applying the WAVE/DSRC integrated platform, we can compensate the shortcomings of DSRC. It can provide more accurate and reliable services.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2016.10a
• /
• pp.106-107
• /
• 2016

Vehicular Adhoc Network는 accident warning, road condition message와 같은 도로상의 정보를 vehicle-to-vehicle 통신을 통해 주어진 목적지까지 얼마나 빠르고 정확하게 전송하는 것이 주요 이슈이다. 무선 센서 네트워크의 많은 타입들 중에서 VANET 환경에 적합한 source 기반의 라우팅 프로토콜은 불안정한 이동 네트워크의 역할을 충실히 수행할 수 있다. Source 라우팅 기법들을 연구하는데 road topology와 map 정보가 사용되며, 본문에서는 도로의 상황과, 라우팅이 직접 수행되는 영역을 부분으로 나누어 각 영역에 속한 이동 노드를 파악하여 다중 경로 라우팅 방안을 제시하여 error 발생과 link fail에 대한 신속한 대처를 수행한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.05a
• /
• pp.507-509
• /
• 2022

In order to collect vehicle internal diagnostic data, it is necessary to collect diagnostic data of ECU (Electronic Control Unit) included in various automotive parts. Diagnostic communication can be used to collect diagnostic data of ECU. In this paper, the method of collecting diagnostic data according to ECU function through standard diagnostic communication and the diagnostic communication module were analyzed. Among the standard modules of AUTOSAR, a standard for automotive electronics used by many automobile manufacturers, the diagnostic communication module was studied, and the process of diagnostic data processing through ECU was studied.