• The Journal of the Acoustical Society of Korea
• /
• v.40 no.6
• /
• pp.571-577
• /
• 2021

This study is a study on System On Chip (SOC) that implements virtual engine sound in electric vehicles without engines, and realizes vivid engine sound by combining Adaptive Difference PCM (ADPCM) method and frequency modulation method for satisfaction of driver's needs and safety of pedestrians. In addition, by proposing an electronic sound synthesis algorithm applying Musical Instrument Didital Interface (MIDI), an engine sound synthesis method and a constitutive model of an engine sound generation system are presented. In order to satisfy both drivers and pedestrians, this study uses Controller Area Network (CAN) communication to receive information such as Revolution Per Minute (RPM), vehicle speed, accelerator pedal depressed amount, torque, etc., transmitted according to the driver's driving habits, and then modulates the frequency according to the appropriate preset parameters We implemented an interaction algorithm that accurately reflects the intention of the system and driver by using interpolation for the system, ADPCM algorithm for reducing the amount of information, and MIDI format information for making engine sound easier.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.10
• /
• pp.1477-1482
• /
• 2022

Haze is a local weather phenomenon in which very small droplets float in the atmosphere, and the amount and characteristics of haze may vary depending on the region. In particular, these haze reduce visibility, which can cause air traffic interference and vehicle traffic accidents, and degrade the quality of security CCTVs and so on. Therefore, in the past 10 years, research on haze removal has been actively conducted to reduce damage caused by haze. In this study, local haze removal is performed by weight generation using a haziness degree evaluator to adaptively respond to haze-free, homogeneous haze, and non-homogeneous haze cases. And the proposed method improves the limitations of the existing static haze removal method, which assumes that there is haze in the input image and removes the haze. We also demonstrate the superiority of the proposed method through quantitative and qualitative performance evaluations with benchmark algorithms.

• Journal of Platform Technology
• /
• v.11 no.3
• /
• pp.3-11
• /
• 2023

Real-time control systems are growing rapidly as infrastructure technologies such as IoT and mobile communication develop and services that value real-time such as factory management and vehicle operation checks increase. Various solutions have been proposed to increase the time sensitivity of this system, but most real-time control systems are currently composed of local servers and multiple clients located in control stations, which are transmitted to local servers where control systems are located. In this paper, we proposed an edge computing-based real-time control model that can reduce the time it takes for the bus information system, one of the real-time control systems, to provide the information to the user at the time it collects the information. Simulating the existing model and the edge computing model, the edge computing model confirmed that the cost for users to receive data is reduced from at least 10% to up to 80% compared to the existing model.

• Journal of Advanced Navigation Technology
• /
• v.27 no.5
• /
• pp.674-684
• /
• 2023

In this paper, a real-time prediction technique for gravity disturbances is proposed using a multi-layer perceptron (MLP) model. To select a suitable MLP model, 4 models with different network sizes were designed to compare the training accuracy and execution time. The MLP models were trained using the data of vehicle moving along the surface of the sea or land, including their positions and gravity disturbance. The gravity disturbances were calculated using the 2160^th degree and order EGM2008 with SHM. Among the models, MLP4 demonstrated the highest training accuracy. After training, the weights and biases of the 4 models were stored in the embedded computer of the INS to implement the MLP network. MLP4 was found to have the shortest execution time among the 4 models. These research results are expected to contribute to improving the navigation accuracy of INS through gravity disturbance compensation in the future.

• Korea Trade Review
• /
• v.45 no.2
• /
• pp.51-65
• /
• 2020

According to an analysis of 560 foreign-invested companies investing in South Korea's manufacturing industry, the following three facts were found. First, the proportion of sales by manufacturing foreign-invested companies is divided into 68.5 percent of domestic sales and 31.5 percent of exports. From 68.5 percent of domestic sales, sales to Korean companies are 60.5 percent, including 37.1 percent for large companies and 23.4 percent for small and medium-sized companies, while only 8.0 percent for domestic consumers. Second, the investment sectors of manufacturing foreign-invested enterprises are 'machine and equipment manufacturing', 'chemical and chemical-chemical material manufacturing-excluding pharmaceuticals', 'electronic components, computers, video, sound and communication equipment manufacturing' and 'vehicle and trailer manufacturing'. It overlaps with electric·electronics, petro-chemicals and automobiles, which are Korea's main industries and areas of Korean global companies. Third, 31.5 percent of the sales of foreign-invested companies in the manufacturing sector are exported. Foreign-invested companies export their products to use them for their parents or affiliates or to the third countries. The analysis shows that foreign-invested companies invested in Korea for B2B transactions with Korean companies. The implications are that Korea can attract foreign investments by utilizing Korean companies' demand for intermediate goods. Foreign-invested companies can invest in Korea in order to use Korea, which has signed free trade agreements with the US, the EU and ASEAN, as an export platform.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.1
• /
• pp.27-40
• /
• 2013

This study is about development of technology system for an advanced deep-sea unmanned underwater robot of S. Korea analysed by the application of scenario planning. It was developed a 6000m class next-generation deep-sea unmanned underwater vehicle(or robot, UUV) system, soonly ROV 'Hemire' and Depressor 'Henuvy' in 2006 at S. Korea and motion control, adaptive control algolithm, a work-space manipulator control algolithm, especially the underwater inertial-acoustic navigation system robust to initial errors and sensor failures. But there are remained matters on position tracking of the USBL, inertial-acoustic navigation system, attitude sensor, designed sonar sensors. So this study suggest the new idea for settle the matters and then this idea help the development of the underwater inertial-acoustic navigation system robust to initial errors and sensor failures, such as acoustic signal drop-out, by modifying the error covariance of the failed sonar signal when drop-out occurs. As a result, the future policy for deep-sea unmanned underwater robot of S. Korea is to further spur the development of new technology and more improvement of the technology level for deep-sea unmanned underwater robot system with indicator and imaginary wall as external device.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.4
• /
• pp.350-357
• /
• 2017

This study was conducted as a post - study on the development of a centralized controller and a hydraulic lift system including structural analysis and remote control for the development of a vertically elevated car. The safety review was carried out through the structural modification of the elevator lift which was developed during the previous research. 3D modeling was performed with Solidworks, and a model of finite element was created through Hypermesh S / W. In addition, the loading environment of the work vehicle for the evaluation is a condition in which the loading amount is 250 kg per position (total, upper, upper, lower, and lower) on the work table, ), The structural analysis was carried out under the condition that the load was 600 kg, and safety was examined in various aspects. As a result, when the allowable load of 250 kg and the excess load of 600 kg are excluded (except Case-11), the stress level is below the yield strength. In the case of Case-11, there is a region exceeding the yield strength at the center support portion of the safety bar at the upper end even after excluding the component which generates the maximum stress, but it does not affect the safety aspect of the whole structure Respectively. Looking at the deflection results, it can be seen that in all cases the maximum deflection occurs in the same table, and the tendency of sagging in both 250 kg and 600 kg is the same.

• Korean journal of communication and information
• /
• v.74
• /
• pp.177-196
• /
• 2015

This paper aims to plan a new research program on the parallel relationship between Korean press and political power, by providing concepts on the mode of existence of professional journalists in Korea. In the midst of the economic crisis of Korean journalism, relative deteriorisation in the political democracy and the liberty of press, and changes in news ecosystem due to the revolution of digital news, the status of professional journalists is at stake. In these circumstances, this paper argues that many existing researches on journalistic professionalism need to be reconstructed in the perspective of professional project. It enables, first of all, an evaluation on actual issues of professional journalists from the actor perspective, i.e. economic interests, social closure, regulative bargain with the authority. Secondly, concerning decoupling phenomenon of journalism and democracy which became salient in the contemporary society, this study raises a necessity to create new logical relations around concepts of journalist professionalism. And we will find, in this situation, a beginning of new evaluation on the mode of existence of professional journalists, that has been possibly developped within the old, assymetric relationship between State-press. And finally, this study proposes to consider a category of professional journalists as a vehicle that helps to conceptualize the old, parallel relationship between Korean press and political power.

• Korean Business Review
• /
• v.3
• /
• pp.23-46
• /
• 1990

I. Introduction: In management control, business analysis has to do with a performance evaluation and is accounted much of manager's decision making, Business indicator accounting is the vehicle of decision making and also feedback can be accomplished by it. This study is to build up a logic about what capacity for use the business indicator accounting has in making decision. Therefore it is significant to make clear the adjustment of decision and to study the function of business indicator. II. Adjustment of Decision and Accounting Work: Adjustment of decision is connected with accounting now that business indicator accounting has a function of decision making. And it should be tied up with specialization as a structure of system, organization, communication and stage system. III. Adjustment of Decision and Managerial Accounting: Managerial account makes a great contributin to the management in which each adjustment of decision should be accomplished. Let me make mention of how the adjustment of decision is accomplished concretely, and what contribution che managerial accounting makes. In an adjustment of decision, centralization and decentrialization of enterprise are very import and I think the three problems, such as the extent of sphere (procurement, production and maketing), the face of affairs (planning, implementing and controlling), the final surge (decision making and action) can be accomplished by the business indicator accounting. IV. Structure of System and Disciplinary Approach for Decision: Decision can be classified into syncronized decision and continuous decision, and is closely connected with centralization and decentralization. In the course of systematizing, the sort of decision is classified into a man in charge of decision, and object of decision, conditions of decision, and an adjusting of decision. For it's object, it has an analogical thinking and an analytic subdivision about the target area. And it is premised on getting a scientific understanding. I think a disciplinary approach remains in solving these intricate problems. V. Conclusion: In this study I dealt with a specialization as a structure in management system and a theory that adjustment is a necessary process in decision making. For an adjustment of decision, exchanging informations and communication are necessary, and accounting is in charge of the process. And then the centralization and decentralization of decision should be connected in the way of adjustment of decision. In case of decentralization, the adjustment of decision is accomplished by the exchanging informations through feedback, and in case of centralization, by the all-round planning. And also I found that syncronized decision and decentralized decision are linked together. It is natural that the function of business indicator accounting is called for to render more services for it. Therefore, according to the extent of centralization and decentralization accounting to adjust the decision, can be various. Consequently, in relation to the structure of system. I think it is necessary to make a theoretical and empirical study of the business indicator accounting.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.6B
• /
• pp.474-482
• /
• 2012

Mobile Gateway(MG) is a wireless LAN device to provide internet services to a passenger on vehicles like a bus. For using internet services, MG connects the Road Side Unit AP(RSU AP) based on WLAN .To provide a stable communication service on the moving vehicle, handoff changing MG's RSU must be handled fast and stably. However, it has a physical limits to remove a disconnection time of handoff process by reason of its technological features. In this paper, we suggest a MIMG(Multi-Interface Mobile Gateway) executing seamless handoff by using multiple wireless LAN interfaces for connecting RSU. In the detailed way to do stable handoff, we suggest the "Link Sharing Technique" to disconnection time of packet transmission for RSU to MIMG and the "Path Sharing Technique" to remove disconnection time of packet transmission for MIMG to RSU. we implemented the MIMG which performs the suggested handoff technique. We confirmed the superiority of our system by remove of the disconnection time(0 ms), and improved over 50 % of the communication bandwidth.