• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.13 no.3
• /
• pp.43-60
• /
• 2005

In september 2004, a new pilot certificate scheme referred to as Sport Pilot Certificate was declared official and standardized in the US. The designation of Light-sport aircraft and the details of the relevant pilot certificate policy was announced out of the perception that a new regulation is required to be applied whereby the limitations on the manufacturing process enhancements and current aviation rules are considered the triggering factors. US Federal Aviation Regulation retains a comprehensive range of airworthiness certificates and aircrafts are managed systematically in accordance with FAR 21, 103. The airworthiness are further segregated into sub categories, which allows differentiated management. Korean Aviation Law classify aircraft into five different categories and powered air vehicle that weighs more than 150kg(19liters fuel capacity) for one seat, 225kg for two seats(38liters fuel capacity) while the systems that fall under a specific mass threshold level are known as ultralight vehicle. The research discusses the policy of the sport pilot certificate and the light-sport aircraft ratings announced official by the Federal Aviation Administration in an intuitive fashion with the analysis of the operations providing the evidence as to the viability of adopting the policy in local grounds. Based on the findings, the report discusses the case for introducing the light-sport aircraft and make recommendation on a strategy of applying the policy in Korea with respect to the pilot certificates, safety agenda, and the written test for the pilot certificate, and operating efficiency.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.12
• /
• pp.5457-5463
• /
• 2011

The objective of this study is to investigate cooling performance characteristics of mobile air conditioning system using R744 as an alternative of R-134a. In order to analyze the cooling performance characteristics of the air conditioning system using R744 for a passenger vehicle, the developed air conditioning system using R744 was applied in a real passenger vehicle and tested under various operating conditions with the variation of gas-cooler inlet air conditions, evaporator inlet air temperatures and compressor speeds. As a result, cooling capacity and coefficient of performance (COP) of the tested air conditioning system decreased with the rise of the inlet air temperature of the gas cooler but increased with the rise of the inlet air temperature of the evaporator. In addition, cooling capacity and coefficient of performance (COP) increased by 42.2 % with the rise of the compressor speed from 900 rev/min to 1800 rev/min, but it decreased by 55.4%.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.4
• /
• pp.363-368
• /
• 2007

Lithium-ion batteries providing high gravimetric energy density are rapidly replacing Ni-Cd and Ni-H2 in aerospace applications. The main advantage is the weight reduction of the battery system. Weight is a major concern in aerospace applications. Also, lithium-ion offer low thermal dissipation, high energy efficiency, and low cell cost. The Onboard battery module for KSLV-I(Korea Space Launch Vehicle) contains 80 Sony US18650 cells configured as 10 strings in parallel, with each string containing 8 series connected cells. This allows to meet voltage and capacity requirements specified for the mission. In this paper design description and specifications of lithium-ion battery developed are presented. Qualification test flow is also shown to make sure the performance in the predicted space environment. Electrical performance was simulated by dedicated program, and verified with electronic load. Lastly, the capacity was proven on real equipment load assembly.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.5
• /
• pp.75-82
• /
• 2021

The number of traffic accidents is about 230,000, and due to non-recurring congestion and high driving speed, the number of deaths per traffic accident on freeways is more than twice compared to other roads. Currently, traffic information is provided based on nodes and links using the centerline of the road, but it does not provide detailed speed information. Recently, installing sensors for vehicles to monitor obstacles and measure location is becoming common not only for autonomous vehicles but also for ordinary vehicles as well. The analysis using large-capacity location-based data from such sensors enables real time service according to processing speed. This study presents an mapping method for individual vehicle data analysis based on space. The processing speed of large-capacity data was increased by using method which applied a quaternary notation basis partition method that splits into two directions of longitude and latitude respectively. As the space partition was processed, the average speed was similar, but the speed standard deviation gradually decreased, and decrease range became smaller after 9th partition.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.1
• /
• pp.76-90
• /
• 2022

The platooning refers to a form in which one or more following vehicles along the path of the leading vehicle(directly driven by the driver) drive in one platoon using V2V, V2I communication and vehicle-mounted sensor. Platooning has emerged in line with the increasing demand for cargo volume and advanced transportation logistics systems, and is expected to have effects such as increasing capacity, reducing labor costs, and reducing fuel consumption. However, compared to general passenger cars, research on autonomous driving of trucks and verification of their effects are insufficient. Therefore, in this study, meta-analysis was conducted on the theme of the effect of truck platooning, and the results of existing studies related to platooning effects were integrated into one reliable, generalized, and objective summary estimate. In conclusion, it was analyzed that the introduction of truck platooning would have an effect of 13.93% increase in capacity, 38.76% decrease in conflict, and 8.13% decrease in fuel consumption.

• International Journal of Highway Engineering
• /
• v.18 no.6
• /
• pp.69-76
• /
• 2016

OBJECTIVES : The objective of this study is to propose a capacity analysis methodology for riverside bike-exclusive roads. METHODS : Three steps were performed to develop a methodology to estimate bikeway capacity. First, we reviewed previous studies on the vehicle-road capacity analysis and proposed their applicability to bikeways. Second, two assumptions were made based on the traffic flow characteristics of bikeways: (1) the capacitated state in bikeways occur within a bicycle platoon, and (2) a bicycle platoon consists of more than three bicycles running in close proximity. In addition, it is assumed that the mean time headway of a bicycle platoon represents the characteristics of the platoon. The normality of the mean-time headway of a bicycle platoon calculated using the central limit theorem leads to the development of a method that estimates the riverside bikeway capacity using data collected from two different riverside bike-exclusive roads (Han-river and Anyangcheon). We used a location-fixed video camera to record videos of running bicycles and wrote a special-purpose software program to code the time-headway data from the videos. RESULTS : Time headways from 189 bicycle platoons were analyzed. The estimated mean-time headway of the capacitated bicycle flow is 1.01 s, from which the capacity of the bikeway is found to be 3578 vehicles/h. CONCLUSIONS : The proposed method that estimates bikeway capacity could be applicable to the analysis of short-range congested area rather than planning the number of lanes. In other words, it determines the sections that are temporarily highly congested and proposes appropriate strategies to mitigate the congestion.

• Journal of Intelligence and Information Systems
• /
• v.15 no.3
• /
• pp.137-150
• /
• 2009

This paper proposes the hybrid heuristic method to apply the opportunity time to solve the vehicle routing and scheduling problem with time constraints(VRSPTW). The opportunity time indicates the idle time which remains after the vehicle performs the unloading service required by each customer's node. In this proposed heuristic, we add the constraints to VRSPTW model for the opportunity time. We also obtain the initial solution by applying the cost evaluation function to the insertion strategy considering the opportunity time. In addition, we improve the former result by applying the opportunity time to the tabu search strategy by swapping the customer's node. Finally, we suggest the construction strategies of initial routing which can efficiently acquire the nearest optimal solution from various types of data in terms of geographical condition, scheduling horizon and vehicle capacity. Our experiment show that our heuristic can get the nearest optimal solution more efficiently than the Solomon's I1 heuristic.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.10
• /
• pp.4679-4684
• /
• 2013

Compared with internal combustion engine, the electric vehicle has a limitation of low driving range due to low battery capacity due to relatively low energy density. Moreover, the energy consumption rapidly increases up to 30% during winter season with operating electric heater. In this study, electric vehicle performance was evaluated using heat pump having higher energy efficiency rather than electric heater for cabin heating. Electric vehicle system and heat pump system were developed using 1-D simulation software called AMESim, the simulation result indicated that the energy consumption could be reduced approximately 66% when the electric heating system was replaced with the heat pump system. As a result, the driving range is expected to increase the similar value. This study proved the merit of heat pump for cabin heating in electric vehicle, and it could contribute to developing suitable heating method for electric vehicles.

• Journal of Ocean Engineering and Technology
• /
• v.26 no.1
• /
• pp.41-46
• /
• 2012

A deep-sea manganese nodule miner consists of 4 parts: the pickup device, crusher, disposal device, and tracked vehicle. The tracked vehicle is an essential component to keep the self-propelled miner moving across deep-sea soil. The performances of the tracked vehicle are influenced by noise factors: the shear strength of the seafloor, bottom current, seafloor slope, track speed, reaction forces of flexible hose, etc. It is necessary to adopt a robust design method that improves the performances and minimizes the variation caused by noise factors. Taguchi's method, the most widely known robust design method, searches for the robust optimum using an orthogonal array composed of the product of the inner array and outer array. In this paper, we propose a new screening technique to reduce the number of input factors and apply the MRSN (Multi-Response Signal to Noise) ratio to convert multiple performances into single one in order to overcome the difficulties and limitations of using Taguchi's method in a case with many input factors and multiple performances. A test miner was already designed and tested. It has about 1/10 the capacity of a commercial one and was successfully operated at an in-shore area. Taguchi's robust design was applied to the tracked vehicle of the test miner, and design improvements were implemented for the vehicle.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.5D
• /
• pp.605-610
• /
• 2009

The either satisfaction levels or limits of tolerance levels felt by the users in the certain space/region should be examined for measuring social capacity on the total amount of vehicles. The reliability of measuring social carrying capacity depends primarily on decreasing the strategic responding biases. To induce the honest responses to preferences, Dichotomous Choice which is specifically known as the Double-Bounded Dichotomous Choice was adopted in this research to suggest the measurement methodology of social carrying capacity on the total amount of vehicles in U-do island. The empirical test was carried out the U-do island, an administrative district of Jeju Special Self-Governing Province. The number of vehicles satisfied by the 10% of residents was 390 and the satisfactory vehicle number was decreased to 132 extended to 90% of residents. This research, based on the political decision making criteria, set up the social carrying capacity in U-do island. The vehicle number satisfied by 50% of residents was 227, which meant the same number of residents turn to be supporter in case of political actions.