• 제목/요약/키워드: Vehicle Accident

검색결과 903건 처리시간 0.028초

마찰력이 수반된 자동차 충돌의 동역학적 해석 (Dynamic Analysis of Automobile Collisions with Friction)

  • 한인환
    • 한국자동차공학회논문집
    • /
    • 제2권2호
    • /
    • pp.1-11
    • /
    • 1994
  • The most commonplace of collisions that directly affect people is that of vehicles. Safety studies have noted a correlation between vehicle occupant injury severity and velocity changes. Methods for estimating collision velocity changes are discussed here. This topic is part of what is referred to as accident reconstruction. Only planar collisions are considered. When a vehicle collides with another, impact dynamics with friction should be considered. This paper presents a general analysis methodology of impact. must dynamics incorporating friction. The presence of friction between sliding contacts during the impact makes the problem difficult since the events such as reverse sliding or sticking, which may occur at different times throughout the impact, must be determined. This paper uses the results of RICSAC experiments for verifying the developed methodology. The analysis and experimental results agree well.

  • PDF

자동순항제어기에 의한 안전도 향상 효과 분석 (Evaluation of the Safety impact by Adaptive Cruise Control System)

  • 이태영;이경수;이찬규;이재완
    • 자동차안전학회지
    • /
    • 제4권1호
    • /
    • pp.5-11
    • /
    • 2012
  • This paper discusses the evaluation of the safety impact of the Adaptive Cruise Control (ACC) system in Korea. To evaluate the safety impact, this paper suggests an analysis method by using the test scenario and field operational test data. The test scenario is composed to represent the main component factor of the ACC system and ACC related accident situation such as rear-end collision, lane-change, and road-curvature, etc. Also, from the field operation test data, the system's potential to increase the safety can be measured ideally. Besides, field operational testdata was used to revise the expected safety impact value as Korean road conditions. By using the proposed evaluation method, enhanced safety impact of the ACC system can be estimated scientifically.

지능형 자동차의 사용자 인증에 대한 위협 및 대응 기법 (User Authentication Risk and Countermeasure in Intelligent Vehicles)

  • 김승환;이근호
    • 한국융합학회논문지
    • /
    • 제3권1호
    • /
    • pp.7-11
    • /
    • 2012
  • 지능형 자동차의 최종 목표는 사고 위험이 전혀 없는 무인 자동차이다. 지능형 자동차의 구현을 위해서는 무선 네트워크 데이터 통신 기술이 중요하다. 본 논문에서는 데이터 통신 기술이 구현이 되었을 때를 가정하여 네트워크 침입 기술에 대해 알아보고, 사용자 인증 및 데이터 위 변조시 그에 따른 보안 취약점과 그에 따른 대응기법을 생체인식 알고리즘 통해 적용하고자 한다. 확실한 사용자 인증 기법과 데이터 전송 기술에 대한 암호화를 통해 더욱 더 안전한 대응 기법을 제안하고자 한다.

한국형 고속철도차량의 차륜/레일 작용력 측정 및 주행안전성 평가 (Evaluation of running safety and measuring wheel/rail force for korean high speed railway vehicle)

  • 함영삼;오택열;백영남
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2003년도 춘계학술대회 논문집
    • /
    • pp.507-512
    • /
    • 2003
  • The railroad is a means of large transportation which has many latents such as a safety and a regularity. That is a results from various confidential performance tests and evaluations of the system. The railroad system consist of various subsystems - vehicle, power supply, signal, communications, track structures, operations, etc. Among them, as an item of safety evaluation there is a measurement of wheel/rail force, so called a measurement of derailment coefficient. This is a very important item because a derailment of a train will bring about a big accident. Especially it is more important in high speed rail of which operation speed is over two times as fast as existing rail. In this paper, it is introduced to preprocess the wheelset for measuring wheel/rail force of high speed rail, such as to treat a measuring wheelset, its finite element analysis, adhesion of strain gauges and static toad test, running test result of main line.

  • PDF

철도건널목 지능화시스템 시범 구축 (Pilot Implementation of Intelligence System for Accident Prevention at Railway Level Crossing)

  • 조봉관;류상환;황현철;정재일
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2010년도 춘계학술대회 논문집
    • /
    • pp.1112-1117
    • /
    • 2010
  • The intelligent safety system for level crossing which employs information and communication technology has been developed in USA and Japan, etc. But, in Korea, the relevant research has not been performed. In this paper, we analyze the cause of railway level crossing accidents and the inherent problem of the existing safety equipments. Based on analyzed results, we design the intelligent safety system which prevent collision between a train and a vehicle. This system displays train approaching information in real-time at roadside warning devices, informs approaching train of the detected obstacle in crossing areas, and is interconnected with traffic signal to empty the crossing area before train comes. Especially, we present the video based obstacle detection algorithm and verify its performance with prototype H/W since the abrupt obstacles in crossing areas are the main cause of level crossing accidents. We identify that the presented scheme detects both pedestrian and vehicle with good performance. Currently, we demonstrate developed railway crossing intelligence system at one crossing of Young-dong-seon line of Korail with Sea Train cockpit.

  • PDF

전기동력 자동차 구동부와 제어부 간 절연고장 검출 방법 (The Method for detecting ground fault between power part and controller part of a electricity vehicle)

  • 박현석;조세봉;전윤석
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2007년도 추계학술대회 논문집
    • /
    • pp.174-176
    • /
    • 2007
  • Because of accident or leak of electricity, high voltage electricity can be conducted to vehicle chassis and damage human. Therefore the unit for detecting ground fault is necessary to minimize loss of life or equipment damage. Isolation resistance must be monitored for detecting ground fault. GFD(Ground Fault Detection) unit continually generate the pulse voltage between high voltage network and chassis. This will be sensing the returned current, calculate the isolation resistance and make decision the ground fault. This paper describes the method detecting ground fault.

  • PDF

VANET 환경에서의 공간 기반 다중경로 라우팅 방안에 관한 (Block Space-based Multipath Routing in Vehicular Ad-hoc Networks)

  • 임진혁;김회원;이현규;이의신
    • 한국정보처리학회:학술대회논문집
    • /
    • 한국정보처리학회 2016년도 추계학술발표대회
    • /
    • pp.106-107
    • /
    • 2016
  • Vehicular Adhoc Network는 accident warning, road condition message와 같은 도로상의 정보를 vehicle-to-vehicle 통신을 통해 주어진 목적지까지 얼마나 빠르고 정확하게 전송하는 것이 주요 이슈이다. 무선 센서 네트워크의 많은 타입들 중에서 VANET 환경에 적합한 source 기반의 라우팅 프로토콜은 불안정한 이동 네트워크의 역할을 충실히 수행할 수 있다. Source 라우팅 기법들을 연구하는데 road topology와 map 정보가 사용되며, 본문에서는 도로의 상황과, 라우팅이 직접 수행되는 영역을 부분으로 나누어 각 영역에 속한 이동 노드를 파악하여 다중 경로 라우팅 방안을 제시하여 error 발생과 link fail에 대한 신속한 대처를 수행한다.

Wireless Traffic Light using Artificial Intelligence

  • Hong, You-Sik;Kim, Chong-Soo;Kim, Chang-Kyun
    • International Journal of Fuzzy Logic and Intelligent Systems
    • /
    • 제3권2호
    • /
    • pp.251-257
    • /
    • 2003
  • In this paper, we wish to construct a optimal traffic cycle using wire remote control. if police vehicle or ambulance suddenly enter the traffic Intersection, it will increase the traffic accident. In this paper, wireless traffic light use the radio traffic control signal and research about the hardware manufacture to check special detectors on urgency vehicles may safety and rapidly enter traffic intersection. Also, this paper present a traffic signal control conditions that analyzes different traffic intersection flows in cases of saturated flows, where the real traffic volume demand is large and the capacity constraints of bottlenecks have significant effects on the flow patterns. Through computer simulation this wireless traffic light has been proven to be much more safety and efficient than fixed traffic signal light which does not consider emergency vehicles for safety escort.

ABS 작동에 의한 캘리퍼하우징에 미치는 피로손상평가 (Fatigue Damage Analysis of the Caliper Housing under ABS Mode)

  • 김정엽;모종운
    • 한국자동차공학회논문집
    • /
    • 제4권4호
    • /
    • pp.156-163
    • /
    • 1996
  • The brakes are the most important safety-critical accident avoidance components of a motor vehicle. They must perform safely under a variety of operating conditions and must have enough strength not to fail during the life of a vehicle. Recently, anti-lock brake systems are used on more and more passenger cars. The ABS brakes modulate brake line pressure to prevent brakes from locking during braking. In this study, finite element analysis, material test for FCD45, measurement of stress and cumulative fatigue damage analysis were performed to evaluate fatigue damage of the caliper housing under ABS mode.

  • PDF

차륜과 레일간의 상호 작용력에 의한 틸팅차량 윤축의 응력분포 (Stress Distribution of Tilting Vehicles Wheel-set by Interaction Force Between Wheel and Rail)

  • 함영삼;오택열
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2006년도 춘계학술대회 논문집
    • /
    • pp.363-364
    • /
    • 2006
  • The important factor to evaluate the running safety of a railway vehicle would be the interaction force between wheel and rail(derailment coefficient), for which is one of important factors to check the running safety of a railway vehicle that may cause a tragic accident. In this paper, when interaction force between wheel and rail happens to wheel-set of tilting vehicles, it analyzes stress distribution and verified safety.

  • PDF