• Title/Summary/Keyword: Vehicle Accident

검색결과 903건 처리시간 0.027초

도시부가로 이단 횡단보도 교통섬 설치 준거에 관한 연구 - 보행자 안전과 서비스수준을 중심으로 - (Study on the Installation warrants of staggered crosswalk traffic island on Urban Streets - Focusing on pedestrian safety and service level -)

  • 심관보;김중효;박경우;하동익
    • 한국ITS학회 논문지
    • /
    • 제12권6호
    • /
    • pp.97-107
    • /
    • 2013
  • 단횡단보도는 보행자가 도로를 두 번에 나누어 횡단하게 하는 횡단보도로 이는 보행대기 시간을 단축할 수 있고 주방향 녹색시간 비율을 증가시켜 신호주기감소 및 차량지체 감소에 효과적이다. 또한 보행자의 횡단거리 감소와 교통섬을 제공하는 기능으로 보행자의 안전 측면에서도 유용하다. 본 연구에서는 도로 기하구조와 보행자의 행동패턴들을 고려한 보행섬의 폭과 길이 등 단일로 상의 이단횡단보도의 설치 준거를 마련하고, 이단횡단보도와 기본형 횡단보도의 사고율을 비교 분석하여 보행자 교통안전 대책을 제시하였다. 본 연구결과, 이단횡단보도의 1억대 km당 사고율은 18.3으로 기본횡단보도 사고율 28.3에 비해 상대적으로 낮은 것으로 분석되었으며 사고발생위치 및 유형분석을 통해 이단횡단보도의 위험지역이 횡단 시작 지점임을 파악하여 이를 바탕으로 보행자 안전지대(여유공간)설치 준거를 제시하였다. 결론적으로 이단횡단보도의 설치준거는 4차로이상 도로에 설치하며 설치시 보행섬의 폭은 유효 보도폭 2.0m 이상이 되도록 차로폭을 조정하는 것이 필요하다. 또한 보행섬의 최소길이는 횡단 보도폭의 2배 길이, 최대길이는 보행자 대기 시간을 고려하여 설치하는 것이 보행자 안전과 이용측면에서 적절할 것으로 사료된다.

하이브리드 차량 통신 시스템에서 연쇄 추돌 사고 방지를 위한 TDMA 기반 MAC 프로토콜 (A TDMA-based MAC protocol in hybrid-vehicular communication systems for preventing a chain-reaction collision on a highway)

  • 오상엽
    • 디지털융복합연구
    • /
    • 제10권8호
    • /
    • pp.179-184
    • /
    • 2012
  • 고속도로의 교통사고는 차량의 빠른 속도로 연쇄 추돌 사고를 발생시킨다. 이를 예방하기 위해 사고 차량은 주변 차량에게 안전 메시지를 브로드캐스트 해야 한다. 여기서 이웃 노드의 개수가 많으면, 프레임 충돌 확률이 높아진다. 이를 해결하기 위해, 선행 연구로 채널을 분리하여 충돌 없이 안전 메시지를 전달하는 시스템이 제안되었다. 하지만, 여러 채널의 분리는 하드웨어의 개발 비용의 증가로 실현가능성이 낮아진다. 그래서 본 논문에서는 하나의 채널로 통신할 수 있는 수퍼프레임을 적용한 TDMA 기반 MAC 프로토콜을 제안한다. 결과적으로, 제안된 프로토콜이 기존 프로토콜과 거의 같은 프레임 수신율을 보여주었다.

AT 급전계통 고장 모의시험장치를 활용한 임피던스 계전방식의 성능검증 (Performance verification on the Impedance Relay Method using Failure Simulator of AT Feeding System)

  • 김완일;이계승;정노건;김재문
    • 전기학회논문지
    • /
    • 제67권2호
    • /
    • pp.325-330
    • /
    • 2018
  • In this paper, we investigated the impedance method for searching fault detection point in case of an accident in the AC electric railway AT feeding system. For this purpose, simulation circuit modeling and prototype hardware are made based on the known numerical analysis. As a result of simulation modeling of the feeding system based on the numerical analysis of the impedance method confirmed that the modeling was properly implemented with an average error rate of 0.07%. Also, as a result of fault event by hardware simulator, it was confirmed that the breaker operation time is shortened and the fault current is decreased while the voltage is close to the supply voltage in the transient state as the point of the fault accident moves away from the substation(SS).

소형 승용차량의 측면충돌 시 탑승자 보호성능 평가 (Evaluation of Occupant Protection of Passenger Vehicles at IIHS Side Impact)

  • 김관희;임종훈;임장호;박인송;조종두
    • 한국자동차공학회논문집
    • /
    • 제22권1호
    • /
    • pp.46-51
    • /
    • 2014
  • 2,097 deaths out of 5,229 by traffic accident occurred by vehicle to vehicle crash and 855 deaths out of 2,097 occurred at side crash in 2011. Korean government adopted New Car Assessment Program to reduce the wounded and deaths at traffic accident in 1999 and side impact test has been added in 2003. 43 out of 53 vehicles tested in NCAP side impact rated 4 and 5 stars means the highest occupant protection. In this study three small class vehicles have been tested according to Insurance Institute for Highway Safety's side crashworthiness test protocol. IIHS test protocol uses 1,500kg moving barrier rather than NCAP's 950kg and the occupant protection rated Good, Acceptable, Marginal and Poor based on injury measure, structural integrity and head protection.

산업 사진측량에 의한 자동차의 외형 정밀 측정 (Precision Measurement of Vehicle Shape using Industrial Photogrammetry)

  • 정성혁;박찬홍;이재기
    • 한국측량학회지
    • /
    • 제22권2호
    • /
    • pp.179-186
    • /
    • 2004
  • 본 연구는 산업 사진측량을 이용하여 자동차의 외형을 정밀 측정하고, 사고 등의 원인으로 변형이 발생하였을 때 변형량을 측정하는 방법에 관한 것이다. 자동차의 외형을 정밀 측정하기 위하여 점군데이터를 취득할 수 있는 프로젝션 타겟을 사용함으로써 보다 곡면에 대한 정밀한 측정이 가능하도록 하였으며, 대상물 촬영 및 좌표해석을 통하여 타겟의 3차원 좌표를 취득하였다. 취득된 점군데이터는 불규칙 삼각망으로 표면을 형성하여 3차원 모델링을 하였다. 또한, 변형 발생부위를 정밀 측정함으로써 교통사고 분석 등에 효율적이고 정밀한 데이터를 제공할 수 있을 것이다.

Neuromuscular Skeletal Plasticity Moving on from Traditional Physiotherapy Concepts

  • Horst, Renata
    • PNF and Movement
    • /
    • 제7권1호
    • /
    • pp.33-46
    • /
    • 2009
  • Purpose : N.A.P.(Neuromuscular Skeletal Plasticity) an integrative neuro-orthopedic concept to facilitate motor strategies in daily life. The primary thesis is, that treatment of body functions and structural impairments should be integrated within goal-oriented activities. The purpose of this article is to demonstrate that the functional activity itself, determines the structure. Material and Methods : A case report of a dentist with brachial plexus lesion after a motor vehicle accident is presented. The necessity for training body functions within relevant tasks is undermined by references which emphasize the importance of training realistic activities to enhance long-term changes in neural representation. Results : The treatment methods presented in this case show significant effects for the patient's ability to participate in his profession within less than a year's time after his motor vehicle accident. Conclusions : Current evidence supports the treatment methods of this concept. The inability to flex his elbow and supinate his forearm placed a considerable doubt to his ability to ever be able to participate in his profession again. Structural reorganization is possible and depends on functional demands, which need to be trained task-specifically. Single case reports may serve as the basis for further randomized controlled studies to support the efficacy of the treatment methods within the N.A.P. concept.

  • PDF

머신러닝/ADAS 정보 활용 충돌안전 제어로직 개발 (Development of Collision Safety Control Logic using ADAS information and Machine Learning)

  • 박형욱;송수성;신장호;한광철;최세경;하헌석;윤성로
    • 자동차안전학회지
    • /
    • 제14권3호
    • /
    • pp.60-64
    • /
    • 2022
  • In the automotive industry, the development of automobiles to meet safety requirements is becoming increasingly complex. This is because quality evaluation agencies in each country are continually strengthening new safety standards for vehicles. Among these various requirements, collision safety must be satisfied by controlling airbags, seat belts, etc., and can be defined as post-crash safety. Apart from this safety system, the Advanced Driver Assistance Systems (ADAS) use advanced detection sensors, GPS, communication, and video equipment to detect the hazard and notify driver before the collision. However, research to improve passenger safety in case of an accident by using the sensor of active safety represented by ADAS in the existing passive safety is limited to the level that utilizes the sudden braking level of the FCA (Forward Collision-avoidance Assist) system. Therefore, this study aims to develop logic that can improve passenger protection in case of an accident by using ADAS information and driving information secured before a collision. The proposed logic was constructed based on LSTM deep learning techniques and trained using crash test data.

Measures to Reduce Traffic Accidents in School Zones using Artificial Intelligence

  • Park, Moon-Soo;Park, Dea-woo
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2022년도 춘계학술대회
    • /
    • pp.162-164
    • /
    • 2022
  • Efforts are being made to prevent traffic accidents within the child protection zone. Efforts are being made to prevent accidents by enacting safety facilities and laws to prevent traffic accidents in the school zone. However, traffic accidents in school zones continue to occur. If the driver can know the situation in the child protection zone in advance, accidents can be reduced. In this paper, we design a camera that eliminates blind spots in school zones and a number recognition camera system that can collect pre-traffic information. Design a LIDAR system that recognizes vehicle speed and pedestrians. Design an LED guidance system that delivers information to drivers without smart devices. We study time series analysis and artificial intelligence algorithms that collect and process pedestrian and vehicle information recognized by cameras and LIDAR. In the artificial intelligence traffic accident prevention system learned by deep learning, before entering the school zone, the school zone information is sent to the driver through the Force Push Service and the school zone information is delivered to the driver on the LED sign. try to reduce accidents.

  • PDF

드론을 활용한 산업단지 재난감시 및 모니터링 시스템에 관한 연구 (A Study on The Industrial Complex Disaster Surveillance and Monitoring System Using Drones)

  • 문수지
    • 한국전자통신학회논문지
    • /
    • 제19권1호
    • /
    • pp.233-240
    • /
    • 2024
  • 본 연구에서는 5G 네트워크용 UAV(: Unmanned Aerial Vehicle)를 사용한 산업단지 내의 현장 상황을 실시간 감시하는 시스템에 대해 소개한다. UAV에 장착된 센서(화재, 유해가스 검출, 산업 재해형 인체 사고 감지)에서 모니터링 이벤트가 발생하면 센서의 주요 정보들이 UAS(: Unmanned Aerial System)애플리케이션 서버로 전달한다. 이러한 정보 전달 처리결과로, 산업단지공단의 관리자나 운영자는 사고 위험 상황별 트리거 처리를 통한 산업단지공단 내의 현장에서 인명사고와 화재, 그리고 유해 가스검출에 대한 법적인 근거 자료를 확보할 수 있게 되었다.

차량 전복 방지 장치를 위한 실시간 차량 질량 추정 시스템 (Real-Time Vehicle Mass Estimator for Active Rollover Prevention Systems)

  • 한광진;김인근;김승기;허건수
    • 대한기계학회논문집A
    • /
    • 제36권6호
    • /
    • pp.673-679
    • /
    • 2012
  • 차량의 롤오버는 심각한 사고중의 하나로 SUV 에 있어서 더욱 위험하나 롤오버 방지시스템을 통하여 발생을 최소화 시킬 수 있다. 하지만 이러한 방지 시스템의 성능은 승객 수나 다른 하중 조건에 따라 변하는 차의 질량이나 무게중심 같은 차량 관성 파라미터에 매우 민감하다. 본 논문에서는 이러한 문제점을 개선하기 위하여 종 방향, 횡 방향, 수직 방향 동역학을 기반으로 한 세 가지 질량 추정 알고리즘을 개발하고 이 세 가지 알고리즘들을 통합하여 임의의 주행 상황에서 실시간 연산을 통해 차량의 질량을 추정할 수 있는 통합 차량 질량 추정 방법을 제안하였다. 또한 실시간 시뮬레이션과 실험을 통하여 이 방법의 성능을 검증하였다.