• 제목/요약/키워드: Vehicle Accident

검색결과 903건 처리시간 0.031초

OBD프로토콜의 차량 주행 데이터와 외부 영상을 이용한 블랙 박스 구현 (Using OBD2 protocol, A implement of blackbox with vehicle state data and the external video)

  • 백성현;장종욱
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2010년도 춘계학술대회
    • /
    • pp.97-100
    • /
    • 2010
  • 최근, 차량 사고로 인한 인명, 재산 손실 때문에 비행기에서 사용하고 있는 블랙박스와 비슷한 기능을 하는 차량용 블랙박스를 차량에 장착하여 사용되고 있다. 기존의 자동차 블랙박스들은 차량의 외부영상이나 이미지만 저장 되어 사고가 났을 때 차량의 주행상태를 알지 못한다. 자동차에는 차량의 상태를 알기 위하여 여러 가지 계측과 제어를 위한 센서를 탑재하고 있으며 이러한 장치들은 ECU(Electronic Control Unit)에 의하여 제어되고 ECU들 간의 통신을 위해 2006년도에 모든 차량에 의무탑재 되어진 OBD2(On-board diagnostics) 프로토콜이 사용되고 있다. OBD2 프로토콜의 사용으로 차량의 많은 ECU에서 발생되는 여러 주행 데이터를 블랙박스의 자료로 사용 할 수 있어서 운전자는 좀 더 확실한 정보를 얻을 수 있다. 본 논문에서는 기존의 영상과 이미지 정보만 저장되는 것이 아닌, OBD2 프로토콜을 이용하여 차량의 정확한 주행 데이터를 사용한 스마트 블랙박스 시스템을 구현 하고자 한다.

  • PDF

RSU 통신 및 딥러닝 기반 최적화 차량 라우팅 시스템 설계 (A design of Optimized Vehicle Routing System(OVRS) based on RSU communication and deep learning)

  • 손수락;이병관;심손권;정이나
    • 한국정보전자통신기술학회논문지
    • /
    • 제13권2호
    • /
    • pp.129-137
    • /
    • 2020
  • 현재 자율주행 차량 시장은 3레벨 자율주행 차량의 상용화를 넘어 4레벨 자율주행 차량을 연구, 개발하고 있다. 4레벨 자율주행 차량에서 가장 주목되는 부분은 차량의 안정성이다. 3레벨과 다르게 4레벨의 자율주행 차량은 긴급상황을 차량이 직접 대처해야 하기 때문이다. 본 논문에서는 긴급상황에서의 즉각적인 반응보다는 차량의 목적지가 정해진 순간 사고 가능성이 가장 낮은 경로를 결정하는 Optimized Vehicle Routing System (OVRS)을 제안한다. OVRS는 RSU 통신으로 수집한 도로와 주변 차량 정보를 분석하여 도로의 위험성을 예측하여 주행 중인 차량이 더 안전하고 빠른 길로 주행할 수 있도록 경로를 설정한다. OVRS는 네트워크 라우팅 방식처럼 도로에 있는 RSU를 통하여 도로 상황에 따른 경로 안내를 실행하기 때문에 차량의 안정성을 더욱 높일 수 있다. 실험 결과, OVRS모듈 중 하나인 ASICM의 RPNN은 CNN보다 약 17%, LSTM보다 약 40% 더 좋은 연산 시간을 보였다. 그러나 해당 연구가 PC를 이용한 가상환경에서 실행되었기 때문에, VPDM의 사고 가능성을 실제로 검증하지 못했다. 따라서 향후 사고 데이터 수집으로 인한 VPDM의 정확도 높은 실험과 실제 차량 및 RSU에서 실제 도로를 대상으로 한 실험이 진행되어야 한다.

제동 직전 자동차 주행 속도 추정에 관한 연구 (An Estimate of Vehicle Velocity of Braking Starting Point)

  • 한창평;박경석;최명진
    • 한국자동차공학회논문집
    • /
    • 제15권5호
    • /
    • pp.174-179
    • /
    • 2007
  • The transient brake time or distance is one of very important factors to guess the vehicle speed to inspect an automobile accident. But, it is usual that the vehicle speed is estimated by using only skid mark without considering the transient brake distance. Deceleration and the friction coefficients of tire and road surface play an important role in calculating the brake distance. In this paper, a scheme is presented to estimate more accurate automobile speed. The scheme contains the effect of the transient brake distance on the speed. Experiment was carried out on the asphalt, unpacked road to get relationships between the speeds and the skid mark distances, and to get the transient brake time. The experimental results were utilized to construct the equation to approximate more realistic vehicle speeds.

Kinect를 이용한 후방 감지 블랙박스 시스템 설계 (Designed rear sensing black-box system using Kinect)

  • 김규현;장종욱
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2013년도 춘계학술대회
    • /
    • pp.290-293
    • /
    • 2013
  • 끊이지 않는 차량 인명피해 사고들로 인해, 그 원인을 분석하고 방지하는 장치 및 기술들이 다양하게 나오고 있다. 그 중에서 대표적으로 블랙박스 및 후방카메라 등이 있다. 이러한 기술이 발전함에도 불구하고 차량 인명사고가 계속 발생하고 있다. 그 이유는 운전자의 부주의나 차량이 후진 시에 사람이 갑자기 차량의 뒤로 지나가거나 기존의 후방 감지시스템이 어린이들을 제대로 감지하지 못하였기 때문이다. 따라서 본 논문은 사고를 방지하기 위한 Kinect를 이용한 후방 카메라와 사고의 원인을 정확하게 밝혀주는 블랙박스를 통합한 후방 블랙박스 시스템을 설계하고자 한다.

  • PDF

차량형상과 충돌형태에 따른 보행자 거동 특성에 관한 연구 (Pedestrians Trajectory Characteristic for Vehicle Configuration and Pedestrian Postures)

  • 유장석;박경진;장명순
    • 한국자동차공학회논문집
    • /
    • 제13권4호
    • /
    • pp.8-18
    • /
    • 2005
  • Pedestrians involved in traffic accidents manifest unique trajectory characteristics depending on the collision speed, vehicle configuration, and pedestrian postures. However, the existing analytical models for pedestrian movements do not fully include the rotational characteristics of the pedestrians because they assume a two dimensional parabolic trajectory. This faulty assumption in the development of these models limits their applicability and reliability This study investigated the pedestrians movement at collision by computer simulation. The simulations are carried out by using HADYMO, which is a special simulation software system for dynamic movement analysis. Vehicles and pedestrians are modeled and verified via real crash worthiness experiments. Simulations are performed for various collision speeds, vehicle configuration, and pedestrian postures. Since the simulation uses multi-body dynamics, It can express irregular phenomena of the bodies quite well. The results can be exploited for vehicle design and traffic accident reconstruction.

보행신호를 대기하는 보행자의 안전에 관한 연구 (A Study on the Safety for Pedestrians Waiting for Signal)

  • 김한솔;백세룡;최용순;윤준규;임종한
    • 자동차안전학회지
    • /
    • 제13권3호
    • /
    • pp.41-46
    • /
    • 2021
  • The number of big traffic accident cases of pedestrian death appeared to be minor, however compared to death rate in car to car accidents is very high and quite a few of the pedestrian death rates among all traffic accidents are counted to be almost 40%. Previous pedestrian safety studies were mostly aimed at reducing the degree of pedestrian injuries from a vehicle to pedestrian collision, and less at preventing a collision itself. This research was conducted with a method of using road facilities to prevent vehicles from rushing into the sidewalk. This research used one of the collision analyzing programs, called PC-Crash to simulate the vehicle rushing into the sidewalk. Based on the program, it could derive an optimal safe zone location where the pedestrian can wait for the pedestrian light safely. Also, changing road facilities such as pedestrian light pillars or signal controllers can widen 440% compared to the present safe zone. Accordingly, researchers have to consider a method to analyze and apply pedestrian safe zones along with road facilities location when designing a road.

퍼지-FMEA기법을 이용한 차량탑재형 고소작업대 사고의 주요 유해위험요소 위험우선순위 결정 (Determination of Critical Hazard Factors in Vehicle-Mounted MEWP using Fuzzy-FMEA)

  • 오세윤;이강돈;신재호;임재용
    • 한국안전학회지
    • /
    • 제38권1호
    • /
    • pp.9-17
    • /
    • 2023
  • In this study, we aimed to identify the important hazard factors and determine their criticality in causing serious accidents in vehicle-mounted mobile elevated work platforms (MEWPs). Fuzzy failure modes and effects analysis (FMEA)was performed using accident data and a survey of experts. To determine the hazard factors, the accident data for the last 10 years were used and a questionnaire survey was designed. The questionnaire survey was sent to four experts in the field of occupational safety to determine the severity, occurrence, and detectability of serious accidents in MEWPs. Furthermore, objective RPN scores and risk priority were obtained using fuzzy FMEA. Finally, the criticality of hazard factors in descending order was found to be overloading, non-installation or defective installation of outriggers, breakage due to wire rope aging, and illegal remodeling of vehicle structures. The results were verified by comparing the occurrence data of serious disasters.

자동차 정기검사 주기에 관한 고찰 (A Consideration on the Inspection Frequency of the Periodic Technical Vehicle Inspection)

  • 임재문;정영달;여운석;강병도;윤영한
    • 자동차안전학회지
    • /
    • 제4권2호
    • /
    • pp.17-21
    • /
    • 2012
  • The periodic technical vehicle inspection is to prevent the accident through the finding and fixing the defects of the vehicle. The periodic technical vehicle inspection in Korea was studied for assessing the adequacy of the inspection frequency. The inspection frequencies of many countries including EU, USA and Japan were compared. The average mileages by the vehicle usage and type were represented. The warranty period and recommended replacement period of parts of the domestic auto makers was studied. Currently, the inspection frequency for the periodic technical vehicle inspection in Korea is appropriate. The pass-fail rate and the cost-benefit analysis for the periodic technical inspection in Korea will be needed in the decision making process for the inspection frequency.

자전거 전도거리를 이용한 충돌속도 예측 모형 개발에 관한 연구 (Development of an Impact Speed Estimation Model using Bicycle Throw Distances)

  • 조용직;이상수
    • 대한교통학회지
    • /
    • 제28권1호
    • /
    • pp.87-96
    • /
    • 2010
  • 국내에서 차대 자전거사고 분석시 사용되는 충돌속도 예측모형은 외국의 연구결과를 그대로 인용하여 사용하고 있다. 그러나 이러한 결과는 제한된 실험조건 하에서 인체모형을 이용하여 도출되었고, 국내 도로 환경 및 자동차의 특성을 반영하지 못하는 단점을 가지고 있다. 본 연구에서는 국내사고 자료를 이용하여 차대자전거 사고시 충돌속도를 예측하는 모형을 개발하였다. 이를 위하여 충돌속도와 자전거 전도거리가 정확하게 확인된 23건의 사고 자료를 수집하여 자전거 전도거리와 충돌속도의 상관관계를 선형 회귀모형으로 도출하고 모형의 변수들에 대한 통계적인 검증을 실시하였다. 그리고 개발된 모형의 실제적인 검증을 위하여 2건의 실제 사고 자료와 비교 분석한 결과, 제시된 모형이 실제 충돌속도와 약 3%이내의 오차를 갖는 매우 유사한 결과를 나타내었다. 따라서 본 연구에서 제시된 모형은 향후 국내 차대자전거사고를 재현 및 분석하는 과정에 매우 유용하게 사용될 수 있다.

자율주행자동차의 윤리적 선택에 따른 교통사고비용 분석 (An Analysis of Accident Costs according to Ethical Choice of Autonomous Vehicles)

  • 정승원;황기연
    • 한국ITS학회 논문지
    • /
    • 제17권6호
    • /
    • pp.224-239
    • /
    • 2018
  • 자율주행자동차로 인해 기존의 교통사고 원인의 대부분을 차지하는 '운전자부주의'로 인한 교통사고가 크게 감소할 수 있지만, '트롤리 딜레마', 차량 결함, 도로 함몰 등과 같은 사고를 피할 수 없는 상황이 발생할 수 있다. 이 경우 사람과 같은 윤리적 선택이 필요해진다. 본 연구는 돌발적인 싱크홀이 발생하여 자율주행차가 교통사고를 피할 수 없는 상황을 가정하고, 자율주행자동차의 윤리적 선택에 따른 교통사고비용을 시뮬레이션 분석을 통해 추정하였다. 이 때 자율주행자동차는 (1) 탑승자의 안전을 최우선으로 하는 이기주의, (2) 인명피해를 최소화하는 의무론, (3) 사고비용을 최소화하는 공리주의의 3가지 윤리적 선택 중 한 가지를 선택하도록 하였다. 분석결과, 이기주의의 교통사고비용이 가장 높게 분석되었고, 인명피해를 최우선으로 하는 의무론의 교통사고비용이 가장 낮게 분석되었다.