• Journal of Korean Society of Transportation
• /
• v.27 no.5
• /
• pp.97-111
• /
• 2009

Image-based traffic information collection systems have entered widespread adoption and use in many countries since these systems are not only capable of replacing existing loop-based detectors which have limitations in management and administration, but are also capable of providing and managing a wide variety of traffic related information. In addition, these systems are expanding rapidly in terms of purpose and scope of use. Currently, the utilization of image processing technology in the field of traffic accident management is limited to installing surveillance cameras on locations where traffic accidents are expected to occur and digitalizing of recorded data. Accurately recording the sequence of situations around a traffic accident in a signal intersection and then objectively and clearly analyzing how such accident occurred is more urgent and important than anything else in resolving a traffic accident. Therefore, in this research, we intend to present a technology capable of overcoming problems in which advanced existing technologies exhibited limitations in handling real-time due to large data capacity such as object separation of vehicles and tracking, which pose difficulties due to environmental diversities and changes at a signal intersection with complex traffic situations, as pointed out by many past researches while presenting and implementing an active and environmentally adaptive methodology capable of effectively reducing false detection situations which frequently occur even with the Gaussian complex model analytical method which has been considered the best among well-known environmental obstacle reduction methods. To prove that the technology developed by this research has performance advantage over existing automatic traffic accident recording systems, a test was performed by entering image data from an actually operating crossroad online in real-time. The test results were compared with the performance of other existing technologies.

• Journal of Korean Society of Transportation
• /
• v.23 no.2
• /
• pp.95-106
• /
• 2005

Road accidents are considered as the result of a complex interplay between road, vehicle, environments, and human factors. Little study, however, has been carried out on the attributes of human factor compared to the road geometric conditions and traffic conditions. The previous researches focused on mainly both traffic and geometric conditions on specific location. Therefore, it's hard to explain phenomenon of the high traffic accident rates where road and traffic conditions are good. Because of these reasons, accident analysis has contributed on geometric improvement and has not contributed on traffic management such as selection of attention section, driver napping alert, etc. The freeway incident management is also associated with reliable prediction of incident occurrences on freeway sections. This paper presents a method for estimating the effect of trip length on freeway accident rate. A PAR (Potential Accident Ratio), the new concept of accident analysis, considering TLFDs (Trip Length Frequency Distributions) is suggested in this paper. This approach can help to strengthen freeway management and to reduce the likelihood of accidents.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.3
• /
• pp.20-37
• /
• 2023

Although traffic signal installations are continuously expanding, the effect of preventing traffic accidents remains unverified. Totally, 7,045 traffic accident data (such as signal violations) registered with TCS were manually searched for a 7-year period from 2013 to 2019 for 1,602 traffic signals in Daejeon Metropolitan City. The top 20 traffic accident intersections were identified, the traffic accident investigation records and field maps were viewed to compare the driving direction and signal phase of the violated vehicle, and the cause of the traffic accident was divided into insufficient signal operation design (operation) and driver negligence (intentional). Results of the analysis revealed that 75% of traffic accidents occurred in thru-left-turn traffic signals and overlap; moreover, extending the yellow time or operating all red signals due to countermeasures against traffic accidents occurring in yellow signals resulted in reduced traffic accidents. Data indicated that Permissive Left Turn requires improvement with the signal operation. In addition, since The Korean National Police Agency is not computerized for traffic accident sites and signal-related data, the lack of manpower necessitates improvement and utilization of TCS when establishing traffic accident prevention measures. It is believed that it will contribute to signal operation by analyzing vast amounts of data collected in the field and presenting improvement measures.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.347-350
• /
• 2012

The researches on driver assistance systems that can prevent an accident have been actively performed due to social issues of traffic accidents with development of vehicle industry in recent. It is required for researchers to develope systems which assist driver's perception and judgment when considering that over 70% of traffic accidents occur by drivers' carelessness and 75% of the total accidents occur at the speed of less 29km per hour. In this paper, we implemented a front and rear vehicle monitoring system that monitors distance in real-time from a vehicle to obstacles at the low-speed or back-ward driving. The implemented system consists of a high angle ultrasonic sensor with distance detection of 10m and 10-degree angle, a wide angle ultrasonic sensor with the detection distance of 3m and a 180-degree, and a ATmega128 chip of ATmel company.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.6
• /
• pp.1019-1024
• /
• 2019

In this paper, we plan to design and manufacture a new sleeping child check system using image and PIR sensors. Therefore, it plans to implement a system that can prevent in-vehicle accidents that can occur due to presence of human and certain temperature inside the vehicle by collecting data from PIR sensors and temperature sensors with the main control device based on Arduino. In addition, the values of sensors can be linked with Bluetooth communication or Wi-Fi communication to send information to the mobile phone, and the sensor values can be printed by texting on the screen. It also plans to use raspberry pie and camera modules to build a display and smartphone streaming service inside the vehicle. Through this, the objective of this study is to prevent safety accidents in school vehicles by making experiments and research in this paper recognize 100% inside the vehicle with the quantitative goal of PIR sensors.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.2
• /
• pp.142-151
• /
• 2018

In the era of the 4th Industrial Revolution, research and development on autonomous vehicles have been actively conducted all over the world. Under these international trends, the Ministry of Land, Infrastructure and Transport is actively promoting the development of autonomous vehicles aiming at commercialization of autonomous vehicles at level 3 or higher by 2020. In the level 3 autonomous vehicle, it is essential to transfer control between the driver and the vehicle according to driving situations. Prior to the full-fledged autonomous vehicle age, this study developed a representative scenario for the safety evaluation on take-over on expressways. To accomplish this, we developed a highway driving scenario first, and then developed six control transition scenarios based on 2014 highway traffic accident data and take-over data. The variables to be considered in the developed scenarios are divided into drivers, vehicles, and environmental factors. A total of 36 variables are selected.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.5
• /
• pp.171-179
• /
• 2004

Today, the number of vehicle increased rapidly with the development of modem science technology, and it caused serious problems; traffic jam, accident and pollution etc. One of the solve methods these problems it is necessary to develope the vehicle navigation systems and it is already widely used to in field of military etc. Vehicle navigation system can increase the efficiency of traffic flow and offer at a drivers at a best driving conditions. In the vehicle navigation, most important thing is to measure of correct position. There are classifiable as three types. The first is G.P.S., method at artificial satellites which measures the present position and velocity any time, any where in the world at the same time. Secondly, a vehicle can determine its position and path information with a gyroscope and odometer signal, which is called Dead-Reckoning method. Thirdly, hybrid navigation system is the combined of two methods to make utilize the advantage of each navigation system. In the paper, we are analyzed to characteristics at a gyro sensor and introduce at a composition of hybrid navigation system which is combined with the G.P.S., D.R., and map-matching technique. We analyze deeply for the Map-Matching method and explain the coordinate transformation for G.P.S., and the Hybrid navigation algorithm is developed and experimented. Finally, we conclude and comment about our road test results.

• Journal of Korea Society of Industrial Information Systems
• /
• v.19 no.5
• /
• pp.69-79
• /
• 2014

This paper proposes the Collision Prevention System based on Fuzzy which reasons a risk with the location information of vehicles and pedestrians and prevents collision between vehicles, and between a vehicle and a pedestrian with the reasoned risk. The proposed system provides three functions. First, it identifies a pedestrian's location with his smart phone and a vehicle's location with the GPS equipped in the vehicle. and transfers the identified information to their neighbors. Second, it makes a vehicle and a pedestrian reason a risk by considering a moving direction, a moving speed and road information. Third, it provides a vehicle and a pedestrian with the reasoned information such as route detour, speed reduction, etc. Therefore, the proposed collision prevention system based on Fuzzy not only prevents collision accidents beforehand by reasoning a risk, but also reduces a variety of losses by protecting traffic accident and congestion.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.441-445
• /
• 2008

LRT is eco-friendly transportation system and can be constructed at less than half cost of subway. Therefore many local governments have planned to construct a various type of LRT and some of them were already under construction. In Para. 2 of Art. 22 of the "Enforcement Decree of Urban Railroad Act" - safety standard of urban railroad vehicle, It can't be operated if "structures and devices" don't come up to standard required to safety operation. Constructor or operator should give an order or operate according to safety standard in Art. 3 of the Safety Standard of Urban Railroad Vehicle. Safety Standard of Urban Railroad Vehicle of 2000 was reformed once to tighten fire safety standard in 2004 after subway accident in Daegue. It was entirely made for medium and large-sized electric motor car. LRT, based on driverless operation and articulated bogie, has different safety standard in signalling devices and the axle load. etc. So many institutes related LRT have required to amend. In this paper, we described features of LRT vehicle and necessity of amendment and discussed how it should be amended.

• Korean Journal of Remote Sensing
• /
• v.34 no.6_1
• /
• pp.1131-1142
• /
• 2018

The autonomous vehicles are being developed and operated widely because of the advantages of reducing the traffic accident and saving time and cost for driving. The vehicle localization is an essential component for autonomous vehicle operation. In this paper, localization algorithm based on sensor fusion is developed for cost-effective localization using in-vehicle sensors, GNSS, an image sensor and reference images that made in advance. Information of the reference images can overcome the limitation of the low positioning accuracy that occurs when only the sensor information is used. And it also can acquire estimated result of stable position even if the car is located in the satellite signal blockage area. The particle filter is used for sensor fusion that can reflect various probability density distributions of individual sensors. For evaluating the performance of the algorithm, a data acquisition system was built and the driving data and the reference image data were acquired. Finally, we can verify that the vehicle positioning can be performed with an accuracy of about 0.7 m when the route image and the reference image information are integrated with the route path having a relatively large error by the satellite sensor.