• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.3
• /
• pp.66-73
• /
• 2013

This study assesses neck injury of occupants in a real traffic accident case that a preceding vehicle moved backward and impacted a parked vehicle at a low velocity. This case is different from a case of whiplash injury caused by rear impact on vehicle. The impact velocity was estimated from damages of the two vehicle bumpers and the displacement of the parked vehicle was also estimated from CCTV images. MADYMO simulation was performed based on the vehicle specifications and investigation report. The comparison of neck flexion moments with the corresponding injury criteria revealed that occupants of the parked vehicle might have hardly neck injury.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.19 no.2
• /
• pp.92-97
• /
• 2011

Vehicle lightings are very important for safe driving during night time. Since the eye recovery time after an exposure to oncoming headlights would take after several seconds, the aiming point of vehicle head lamps have to pass safety requirements. Despite the fact that vehicle inclination is variable with vehicle load conditions, the head lamps aiming point is usually fixed at a constant position which is set by car manufacturer. Consequently, vehicle head lamps under varying load conditions often make people in the opposing vehicle uncomfortable, and even worse, can cause an accident. This paper presents an active vehicle lighting mechanism to automatically adjust its aiming point, or cut-off line, in order to compensate the change in vehicle inclination resulting from load variations. The effectiveness of the proposed method is demonstrated through a set of simulations and experiments with a real vehicle.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.8
• /
• pp.823-830
• /
• 2009

For developing automotive parts and telematics devices the real car test often shows limitation because it needs high cost, much time and has the possibility of the accident. Therefore, a Vehicle Driving Simulator (VDS) instead of the real-car test has been used by some automotive manufactures, research centers, and universities. The VDS is a virtual reality device which makes a human being feel as if one drives a vehicle actually. Unlike actual vehicle, the simulator has limited kinematic workspace and bounded dynamic characteristics. So it is difficult to simulate dynamic motions of a multi-body vehicle model fully. In order to overcome these problems, a washout algorithm which restricts workspace of the simulator within the kinematic limits is needed, and analysis of dynamic characteristics is required also. However, a classical washout algorithm contains several problems such as time delay and generation of wrong motion signal caused by characteristics of filters. Specially, the classical washout algorithm has the simulator sickness when driver hardly turns brakes and accelerates the VDS. In this paper, a new washout algorithm is developed to enhance the motion sensitivity and improve the simulator sickness by using the vehicle tilt signal which is generated in the real time vehicle dynamic model.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.1
• /
• pp.187-192
• /
• 2015

In general, design of urban intersections are fundamentally different from rural intersections, but current urban intersection design has been appled to rural standards. This study has suggested the design standard for urban intersection grades based on the existing literature, field investigating and comparative analysis. Moreover, this study analyzes and compares the differences between urban and rural intersections, and intersections have been derived by appropriate design standards after reviewing the domestic and international grades design criteria. Site survey was performed to validate the derived design criteria by analyzing statistically to establish the design standards. Results were produced for the intersection portion grade standards by comparing the number of instructions which produced appropriate slope degree from 2.5% to 3% in normal condition and slope can be extended to 5% in some critical cases. In-situ investigation was performed to validate the produced data where slope was found from 0.0~8.6%. Additional data of accident analysis were also collected for the validation of the suggested data and correlation analysis was performed using the SPSS tool. Data were analyzed statistically using 95% significance level for vehicle-to-vehicle collided, head-on collision accident rates, where accident rates significantly correlated with the grade. Therefore, appropriate grade at the intersection should be designed and applied in order to reduce the number of accidents at the intersection. Finally, appropriate grades for urban intersections are suggested from 1-3% for normal cases and grades could extend up to 5% for unavoidable cases where extra care must be taken when designing.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.10a
• /
• pp.236-238
• /
• 2022

According to the current Road Traffic Act, the 2020 amendment bill is currently in effect as a system that designates vehicle types for each lane for the purpose of securing road use efficiency and traffic safety. When comparing the number of traffic accident fatalities per 10,000 vehicles in Germany and Korea, the number of traffic accident deaths in Germany is significantly lower than in Korea. The representative case of the German autobahn, which did not impose a speed limit, suggests that Korea's speeding laws are not the only answer to reducing the accident rate. The designated lane system, which is observed in accordance with the keep right principle of the Autobahn Expressway, plays a major role in reducing traffic accidents. Based on this fact, we propose a traffic enforcement system to crack down on vehicles violating the designated lane system and improve the compliance rate. We develop a designated lane enforcement system that recognizes vehicle types using Yolo5, a deep learning object recognition model, recognizes license plates and lanes using OpenCV, and stores the extracted data in the server to determine whether or not laws are violated.Accordingly, it is expected that there will be an effect of reducing the traffic accident rate through the improvement of driver's awareness and compliance rate.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.5
• /
• pp.74-91
• /
• 2023

Several that analyzed the effectiveness of traffic safety facilities a method of comparing changes in the number of accidents, accident severity, speed through traffic accident data before and after installation or speed data collected from vehicle detection systems (VDS). , when traffic accident data is used, it takes a long time to collect because must be collected for at least one year before and after installation. , the road environment may change during this period, such as the addition of other traffic safety facilities in addition to the facilities to be analyzed. , the location of the VDSs for speed data is often different from the location where analysis is required, and there is a problem in that the investigators are exposed to the risk of traffic accident during on-site investigation. Therefore, this study a case study by establishing a methodology to determine effectiveness video images with a drone, extracting data using a program, and comparing vehicle driving speeds before and after speed reduction facilities. Vehicle speed surveys using drones are much safer than observational surveys conducted on highways and have the advantage of tracking speed changes along the vehicle, it is expected that they will be used for various traffic surveys in the future.

• Journal of Korean Society of Transportation
• /
• v.28 no.4
• /
• pp.7-18
• /
• 2010

This study analyzed the relative vehicle speed and vehicle deceleration time caused by traffic conflicts using vehicle speed data at expressway toll gates and traffic conflict occurrence data. According to the analysis, the greater the relative vehicle speed is at the toll gate, the more sudden vehicle deceleration occurs due to traffic conflicts. In particular, a comparison study of cases in similar operating conditions presents a finding that usage of lanes influences traffic conflict occurrences as well as relative vehicle speed. With this finding, the study further conducted a quantitative analysis of the accident rates in relation to the relative vehicle speed between vehicles using a "Hi-Pass" lane and a regular lane at the toll gate. It indicates that when the relative vehicle speed is greater, the accident rate is higher due to sudden vehicle deceleration and shorter deceleration time. Furthermore, when the expressway entrance/exit point is closely located to a toll gate and the relative vehicle speed is great, a analysis at a traffic conflict shows a low value.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.5
• /
• pp.827-835
• /
• 2017

With the rapid progress of ageing several issues concurrently occur, and one important social issue that must be resolved is accidents involving Elderly drivers. Efforts to reduce the frequency of such accidents is a must in order to be prepared to face a superaged society. Currently people aged 65 or older are prescribed as an "Elderly person." Therefore, various studies concerning accidents involving Elderly drivers apply this age criteria to separate regular drivers and Elderly drivers. However, there is no criteria to practically discern Elderly drivers with certain physical features as vulnerable road users based on a level of acceptable accuracy. Therefore, this studies intends to compare the possibility of accidents by age group of Elderly drivers by correlation analysis to analyze the accident characteristics by age group. Results showed that for drivers aged 75 and older, their influence on major accident characteristics by vehicle type increased with higher age groups. In particular, passenger cars had a relatively low accident frequency rate for drivers aged between 70 and 80, but for drivers aged 75 to 84, they had higher influence on accidents for the same vehicle type. This demonstrates that as ageing progresses and the average life expectancy increases, the age span of elders continues to increase, meaning that characteristics differ by age group among the aged. This study confirmed that the influence on the possibility of accidents differs by age group among the aged.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.481-484
• /
• 2008

The important factor to evaluate the running safety of a railway vehicle would be the interaction force between wheel and rail(derailment coefficient), for which is one of important factors to check the running safety of a railway vehicle that may cause a tragic accident. Element that analyze derailment coefficient is consisted of wheel load and lateral force. In this paper, studied about method that calculate vertical force(wheel load) by bending load of axle in rolling stocks.

• Journal of Korean Society of Transportation
• /
• v.19 no.5
• /
• pp.109-117
• /
• 2001

The median encroachment accident model proposed in this paper is the first step to develop cost-effective criteria about installing facilities preventing traffic accidents by median encroachment. This model consists of expected annual number of median encroachment on roadway and conditional probability to collide with vehicles on opposite lane after encroachment. Expected encroachment number is related to traffic volume and quote from a study of Hutchinson & Kennedy(1966). The probability of vehicle collision is composed of assumed headway distribution of opposite directional vehicles (negative exponential distribution), driving time of encroaching vehicle and Gap & Gap acceptance model. By using expected accident number yielded from the presented model, it will be able to calculate the benefit of reduced accident and to analyze the cost of installing facilities. Therefore this will help develop cost-effective criteria of what, to install in the median.