• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.97-100
• /
• 2010

Lately, becausing Life, property loss from car accident, vehicles have been used vehicle blackbox like blackbox by airplane. when the accident happened, existing car blackbox that was stored external image or video of vehicle don't know the vehicle's driving conditions. For knowing vehicle's driving conditions, vehicle is loaded sensors for Variety of measurement and control. the sensors is controlled by ECU(Electronic Control Unit) and all vehicles is used Mandatory OBD2(On-board diagnostics) protocol for communication between ECUs since 2006. Using ODB2 protocol, driver use blackbox data by various driving data to occur vehicle' ECU and can be obtained more definitive information. In this paper, there implement smart blackbox system to use exact vehicle's data using OBD2 protocol rather than blackbox to store external image or video.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.2
• /
• pp.129-137
• /
• 2020

Currently, The autonomous vehicle market is researching and developing four-level autonomous vehicles beyond the commercialization of three-level autonomous vehicles. Because unlike the level 3, the level 4 autonomous vehicle has to deal with an emergency directly, the most important aspect of a four-level autonomous vehicle is its stability. In this paper, we propose an Optimized Vehicle Routing System (OVRS) that determines the route with the lowest probability of an accident at the destination of the vehicle rather than an immediate response in an emergency. The OVRS analyzes road and surrounding vehicle information collected by The RSU communication to predict road hazards, and sets the route for the safer and faster road. The OVRS can improve the stability of the vehicle by executing the route guidance according to the road situation through the RSU on the road like the network routing method. As a result, the RPNN of the ASICM, one of the OVRS modules, was about 17% better than the CNN and 40% better than the LSTM. However, because the study was conducted in a virtual environment using a PC, the possibility of accident of the VPDM was not actually verified. Therefore, in the future, experiments with high accuracy on VPDM due to the collection of accident data and actual roads should be conducted in real vehicles and RSUs.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.5
• /
• pp.174-179
• /
• 2007

The transient brake time or distance is one of very important factors to guess the vehicle speed to inspect an automobile accident. But, it is usual that the vehicle speed is estimated by using only skid mark without considering the transient brake distance. Deceleration and the friction coefficients of tire and road surface play an important role in calculating the brake distance. In this paper, a scheme is presented to estimate more accurate automobile speed. The scheme contains the effect of the transient brake distance on the speed. Experiment was carried out on the asphalt, unpacked road to get relationships between the speeds and the skid mark distances, and to get the transient brake time. The experimental results were utilized to construct the equation to approximate more realistic vehicle speeds.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.290-293
• /
• 2013

Due to vehicle personal injury accident does not, and to analyze the cause and prevention of a variety of devices and technologies are coming out. Among other things, representative of the black box, and rear camera. Despite these advances in technology, and vehicle human injuries continue to occur. The reason for this is that the children, the negligence of the driver or the vehicle is in reverse when a person suddenly passed the back of the vehicle, or the rear of the existing detection system is properly detected was unable to. Therefore, In this paper, we want to design a black box to reveal the cause of the accident, using Kinect to prevent accidents, rear-view camera and rear integrated black box system.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.4
• /
• pp.8-18
• /
• 2005

Pedestrians involved in traffic accidents manifest unique trajectory characteristics depending on the collision speed, vehicle configuration, and pedestrian postures. However, the existing analytical models for pedestrian movements do not fully include the rotational characteristics of the pedestrians because they assume a two dimensional parabolic trajectory. This faulty assumption in the development of these models limits their applicability and reliability This study investigated the pedestrians movement at collision by computer simulation. The simulations are carried out by using HADYMO, which is a special simulation software system for dynamic movement analysis. Vehicles and pedestrians are modeled and verified via real crash worthiness experiments. Simulations are performed for various collision speeds, vehicle configuration, and pedestrian postures. Since the simulation uses multi-body dynamics, It can express irregular phenomena of the bodies quite well. The results can be exploited for vehicle design and traffic accident reconstruction.

• Journal of Auto-vehicle Safety Association
• /
• v.13 no.3
• /
• pp.41-46
• /
• 2021

The number of big traffic accident cases of pedestrian death appeared to be minor, however compared to death rate in car to car accidents is very high and quite a few of the pedestrian death rates among all traffic accidents are counted to be almost 40%. Previous pedestrian safety studies were mostly aimed at reducing the degree of pedestrian injuries from a vehicle to pedestrian collision, and less at preventing a collision itself. This research was conducted with a method of using road facilities to prevent vehicles from rushing into the sidewalk. This research used one of the collision analyzing programs, called PC-Crash to simulate the vehicle rushing into the sidewalk. Based on the program, it could derive an optimal safe zone location where the pedestrian can wait for the pedestrian light safely. Also, changing road facilities such as pedestrian light pillars or signal controllers can widen 440% compared to the present safe zone. Accordingly, researchers have to consider a method to analyze and apply pedestrian safe zones along with road facilities location when designing a road.

• Journal of the Korean Society of Safety
• /
• v.38 no.1
• /
• pp.9-17
• /
• 2023

In this study, we aimed to identify the important hazard factors and determine their criticality in causing serious accidents in vehicle-mounted mobile elevated work platforms (MEWPs). Fuzzy failure modes and effects analysis (FMEA)was performed using accident data and a survey of experts. To determine the hazard factors, the accident data for the last 10 years were used and a questionnaire survey was designed. The questionnaire survey was sent to four experts in the field of occupational safety to determine the severity, occurrence, and detectability of serious accidents in MEWPs. Furthermore, objective RPN scores and risk priority were obtained using fuzzy FMEA. Finally, the criticality of hazard factors in descending order was found to be overloading, non-installation or defective installation of outriggers, breakage due to wire rope aging, and illegal remodeling of vehicle structures. The results were verified by comparing the occurrence data of serious disasters.

• Journal of Auto-vehicle Safety Association
• /
• v.4 no.2
• /
• pp.17-21
• /
• 2012

The periodic technical vehicle inspection is to prevent the accident through the finding and fixing the defects of the vehicle. The periodic technical vehicle inspection in Korea was studied for assessing the adequacy of the inspection frequency. The inspection frequencies of many countries including EU, USA and Japan were compared. The average mileages by the vehicle usage and type were represented. The warranty period and recommended replacement period of parts of the domestic auto makers was studied. Currently, the inspection frequency for the periodic technical vehicle inspection in Korea is appropriate. The pass-fail rate and the cost-benefit analysis for the periodic technical inspection in Korea will be needed in the decision making process for the inspection frequency.

• Journal of Korean Society of Transportation
• /
• v.28 no.1
• /
• pp.87-96
• /
• 2010

The impact speed estimation practice used in the car-bicycle accident analysis practice in Korea was mainly dependent on foreign study results which were tested with limited speed ranges and vehicle types, but the characteristics of roadway, human body, and vehicle performance were quite different. This study developed an impact speed estimation model using the car-bicycle accident field data. For this, a regression analysis was performed using the impact speed and bicycle throw distance collected from 23 real accident data, and statistical test was also conducted. For the verification of the induced model, the impact speeds derived from the model were compared with the true impact speeds estimated from skid marks of two accident cases. The result showed that the two speeds were very close to each other. It is believed that the model could be included in the car-bicycle accident analysis practice.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.6
• /
• pp.224-239
• /
• 2018

Autonomous vehicles can significantly reduce accidents due to 'driver's carelessness', which occupies the majority of causes for traffic accidents, but they may fail to avoid traffic accidents due to unexpected situations, such as "trolley dilemma", vehicle defects and road defects. Therefore in situations Autonomous vehicles need to be made ethical choices. This study assumes that Autonomous vehicles can not avoid traffic accidents due to unexpected sink holes. In this situation, the traffic accident costs was analyzed for the ethical choices of Autonomous vehicles. In the process, Autonomous vehicles were made to choose one of three ethical choices : (1) Egoism with priority on passenger safety, (2) Deontology for minimizing human damages, (3) Utilitarianism with minimizing traffic accident costs. As a result of the analysis, egoism had the highest traffic accident costs, and deontology for minimizing human damages had the lowest traffic accident costs.