• Environmental Engineering Research
• /
• v.14 no.1
• /
• pp.53-60
• /
• 2009

The main objective was to develop and assess a dynamic fate and transport model for lead in air, soil, sediment, water and vegetation. Daejeon was chosen as the study area for its relatively high contamination and emission levels. The model was assessed by comparing model predictions with measured concentrations in multi-media and atmospheric deposition flux. Given a lead concentration in air, the model could predict the concentrations in water and soil within a factor of five. Sensitivity analysis indicated that effective compartment volumes, rain intensity, scavenging ratio, run off, and foliar uptake were critical to accurate model prediction. Important implications include that restriction of air emission may be necessary in the future to protect the soil quality objective as the contamination level in soil is predicted to steadily increase at the present emission level and that direct discharge of lead into the water body was insignificant as compared to atmospheric deposition fluxes. The results strongly indicated that atmospheric emission governs the quality of the whole environment. Use of the model developed in this study would provide quantitative and integrated understanding of the cross-media characteristics and assessment of the relationships of the contamination levels among the multi-media environment.

• Journal of Environmental Science International
• /
• v.17 no.11
• /
• pp.1203-1210
• /
• 2008

Flow resistance in a natural stream is caused by complex factors, such as the grains on the bed, vegetation, and bed-form, reach profile. Flow resistance in a generally stable gravel bed stream is due to protrudent grains from bed. Therefore, the flow resistance can be calculated by equivalent roughness in gravel bed stream, but estimation of equivalent roughness is difficult because nonuniform size and irregular arrangement of distributed grain on natural stream bed. In previous study, equivalent roughness is empirically estimated using characteristic grain size. However, application of empirical equation have uncertainty in stream that stream bed characteristic differs. In this study, we developed a model using an analytical method considering grain diameter distribution characteristics of grains on the bed and also taking into account flow resistance acting on each grain. Also, the model consider the protrusion height of grain.

• Proceedings of the KSRS Conference
• /
• 2008.10a
• /
• pp.204-207
• /
• 2008

The purpose of this study is to identify how much the MODIS NDVI (Normalized Difference Vegetation Index) can explain the soil moisture simulated from SWAT (Soil and Water Assessment Tool) continuous hydrological model. For the application, ChungjuDam watershed (6,661.3 $km^2$) was adopted which covers land uses of 82.2 % forest, 10.3 % paddy field, and 1.8 % upland crop respectively. For the preparation of spatial soil moisture distribution, the SWAT model was calibrated and verified at two locations (watershed outlet and Yeongwol water level gauging station) of the watershed using daily streamflow data of 7 years (2000-2006). The average Nash and Sutcliffe model efficiencies for the verification at two locations were 0.83 and 0.91 respectively. The 16 days spatial correlation between MODIS NDVI and SWAT soil moisture were evaluated especially during the NDVI increasing periods for forest areas.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.1244-1248
• /
• 2007

This study aims at investigating the in situ applying grass concrete system in river environments which widely used nowadays and reviewing the effect and flow resistance for grass concrete structure through the physical experiments by hydraulic model test and developing application method in river bed which has rigid flood resistance. Grass concrete structure has been independently tested under high velocity flow under the super critical condition, as well as sud critical flow measuring velocity and water surface elevation along the cross section. This results shows grass concrete system is also suited to use in aggressive river environments such as repairing a flood damaged embankment that had placed at risk the adjacent drainage channel with vegetation.

• Journal of Wetlands Research
• /
• v.4 no.1
• /
• pp.51-61
• /
• 2002

The wetland is a biologically integrated system consisting of water, soil, bacteria, plants, and animals. The wetland helps sustain the ecosystem, control the micro-climate and flood, maintain the ground water level, and provide fishing grounds. From the environmental standpoint, the wetland plays a vital role in reducing water pollution by filtering out sand and other polluted matters, producing oxygen, absorbing chemicals and nutrients. For these reasons, interest in restoring the wetlands has been steadily increasing. Artificial wetland, which is also referred to as created wetland or constructed wetland, is an alternative to natural wetland. Like natural wetland, artificial wetland is environmentally friendly and can effectively lower pollutant levels. The Korea government is actively reviewing the construction of artificial wetlands in mining and water supply areas to decrease nonpoint pollutant sources. This paper attempts to develop a pollutant removal model for the water quality improvement function of artificial wetlands. Artificial wetland can improve the quality of the water; however, depending on the type of water inflow, vegetation and hydrology, its effect can be different.

• Journal of Environmental Science International
• /
• v.12 no.5
• /
• pp.529-539
• /
• 2003

We developed a numerical model that considered the influences on the thermal environment of vegetation, water surfaces and buildings to predict micro climatic changes in a few $\textrm{km}^2$ scales; and applied this model to the Mino residential development region in Osaka Prefecture by using a nested technique. The calculated temperatures and winds in the residential development region reasonably agreed with the observed ones. We then investigated the influences on the thermal environment of the construction of a dam, the change of the green coverage rate. The results obtained from the numerical simulations were qualitatively reasonable.

• Proceedings of the Korea Contents Association Conference
• /
• 2008.05a
• /
• pp.780-783
• /
• 2008

This study developed a model that could calculate roughness using Manning's and Chezy coefficient for Yangjae-stream. The estimated roughness by model developed was used for roughness coefficient in the stream without water level-discharge data. Roughness coefficient was estimated using assumed and calculated water level about each discharge scale by unsteady flow analysis. As a result, error of water surface level by model was shown 1.29m, it was shown that the flow resistance tends to increase with the desity of vegetation.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1174-1176
• /
• 2003

Recently 3D city models are required for many applications such as urban microclimate, transportation navigation, landscape planning and visualization to name a few. The existing 3D city models mostly target on modeling buildings, but vegetation also plays an important role in the urban environment. To represent a more realistic urban environment through the 3D city model, in this research, an investigation is conducted to extract the position of trees from high resolution IKONOS imagery along with Airborne Laser Scanner data. Later, a tree growth model is introduced to simulate the growth of trees in the identified tree-positions.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.6 no.3
• /
• pp.8-13
• /
• 2015

This study investigates the application of a synthetic resine based net-hose system to sustain vegetated embankment slope reinforcement. The net-hose system is designated to improve water supply to the vegetation that can suffer the lack of water in case of extreme drying condition or rock slope where water supply is relatively insufficient to ensure the growth of vegetation. A series of laboratory tests were conducted to check the structural adequacy and effectiveness of net-hose system. The results indicated that the model slope equipped with net-hose system seemed to provide better water supply resulting in more vegetated areas and higher matric suction due to active water uptake capacity, which might be contributed to greater shear strength of slope surface. A limited numerical analysis was conducted to verify the effect of water uptake on vegetated root system that generally yields better slope stability.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.19 no.1
• /
• pp.155-170
• /
• 2016

This study established the definition of invasive disturbance species for a sustainable management and biodiversity, and derived the influence factors caused by the species. To define the species, the paper reviewed similar words such as alien species and invasive species, using standard definitions. Also reviewed the results of recent research on the factors of the species. The paper defined the invasive disturbance species as an species whose establishment and spread threaten ecosystems, habitats or species with economic or environmental harm including native and non-native. Through the reviews, The factors were classified as geographic (altitude, slope, and soil, etc.), climate (temperature, precipitation, climate change, etc.) and, anthropogenic (land use, population, road, and human activity, etc.), and species & vegetation structure (species property, local-species richness, and canopy, etc.). Especially, human activity such as urbanization and highways may be associated with both higher disturbance and higher propagule pressure. In the further study, it is required development of mitigation strategies and vegetation structure model against invasive disturbance species in urban forest based on this study.