• ETRI Journal
• /
• v.46 no.4
• /
• pp.727-736
• /
• 2024

Telecommunications through an electrically conductive medium require the use of carrier bands with very-low and ultralow frequencies to establish radiofrequency links in harsh environments. Recent advances in atomic magnetometers operating at very-low frequencies have facilitated the reception of digitally modulated signals. We demonstrate the transmission and reception of quadrature phase-shift keying (QPSK) signals using a multi-resonant loop antenna and atomic magnetometer, respectively. We report the measured error vector magnitude according to the symbol rate for QPSK modulation and analyze the bandwidth of a receiver based on the atomic magnetometer. The multi-resonant loop antenna noticeably enhances the bandwidth by over 70% compared with a single-loop antenna. QPSK modulation for a carrier frequency of 20 kHz and symbol rate of 150 symbols per second verifies the feasibility of demodulation, and the measured error vector magnitude and signal-to-noise ratio are 7.29% and 30.9 dB, respectively.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.15 no.1
• /
• pp.1-7
• /
• 1997

In the digital mapping for data base contruction, the positional information is used as an important tool in LIS/GIS(Land Information System/Geographic Information System) that is used for a facility management, urban/cadastral management as well as in spatial analysis. In this paper, for an error analysis of X, Y coordinates data on digital map, test area was classified by topography, density, and slope. The coordinates on topographic map were assumed as true values and they were compared with the coordinates on digital map. A result of the numerical test show that a vector data of line type had more gross error than vector data of polygon type. And, SME(stanadrd mean error) of urban or intermountain area had small values compared to that of suburban area in topography analysis. The SME of dense and middle zone had small values compared to that of loose zone in density analysis. In another slope analysis. the SME of steep of gentle slope had small values compared to that of flatland.

• Journal of KIISE:Software and Applications
• /
• v.34 no.1
• /
• pp.30-39
• /
• 2007

The existing content-based spam mail filtering algorithms have difficulties in filtering spam mails when e-mails contain images but little text. In this thesis we propose an efficient spam mail classification algorithm that utilizes the link structure of e-mails. We compute the number of hyperlinks in an e-mail and the in-link frequencies of the web pages hyperlinked in the e-mail. Using these two features we classify spam mails and legitimate mails based on the decision tree trained for spam mail classification. We also suggest a hybrid system combining three different algorithms by majority voting: the link structure analysis algorithm, a modified link structure analysis algorithm, in which only the host part of the hyperlinked pages of an e-mail is used for link structure analysis, and the content-based method using SVM (support vector machines). The experimental results show that the link structure analysis algorithm slightly outperforms the existing content-based method with the accuracy of 94.8%. Moreover, the hybrid system achieves the accuracy of 97.0%, which is a significant performance improvement over the existing method.

• Journal of Korea Society of Industrial Information Systems
• /
• v.14 no.3
• /
• pp.106-113
• /
• 2009

Various statistical classification methods have been used to establish prediction model of underground cultural assets in our country. Among them, linear discriminant analysis, logistic regression, decision tree, neural network, and support vector machines are used in this paper. We introduced the basic concepts of above-mentioned classification methods and applied these to the analyses of real data of I city. As a results, five different prediction models are suggested. And also model comparisons are executed by suggesting correct classification rates of the fitted models. To see the applicability of the suggested models for a new data set, simulations are carried out. R packages and programs are used in real data analyses and simulations. Especially, the detailed executing processes by R are provided for the other analyser of related area.

• Aerospace Engineering and Technology
• /
• v.4 no.1
• /
• pp.66-76
• /
• 2005

In this study, star visibility analysis of a star tracker is performed by using a statistical apprach. The probability of the Sun and the Earth proximity, the solar array masking probability, and the solar array blinding probability by the Sun light are obtained from the arbitrary chosen satellite positions as a function of a line of sight vector of the star tracker in several satellite attitude modes. This analysis demonstrates that the optimized star tracker accomodations can be determined to be an elevation angle -40o and two azimuth angles $-35^{circ}$ and $-150^{circ}$.

• Journal of Microbiology
• /
• v.37 no.2
• /
• pp.86-89
• /
• 1999

An OTHBVS cell line from HepG2 was established. This cell line stably expresses the human hepatitis B virus (HBV) middle S protein that includes the preS2 region which is important for HBV particle entry into the hepatocyte. To establish this cell line, the middle S open reading frame (ORF), with a promoter located in the 5' region and enhancer located in the 3' region, was cloned downstream from the metallothionine (MT) promoter of the OT1529 vector. In this vector, expression of the middle S protein was constructed to be regulated by its own promoter and enhancer. Expression of the large S protein which contains the preS1 region in addition to the middle S protein was designed to be regulated by the MT promoter. When extracts of OTHBVS cells were examined with an S protein detection kit (RPHA, Korea Green Cross Co.), an S protein was detected. Total mRNA of OTHBVS cell examined by northern blot analysis with an S ORF probe revealed small/middle S transcripts (2.1 kb). When the MT promoter was induced by Zn, large S transcripts (2.4 kb) were detected. The GP36 and GP33 middle S proteins were presumably detected, but large S proteins were not detected by immunostain analysis using anti-preS2 antibody.

• Structural Engineering and Mechanics
• /
• v.42 no.2
• /
• pp.175-189
• /
• 2012

This paper presents an algorithm for structural reliability with the response surface method. For this aim, an approach with three stages is proposed named as improved response surface method. In the algorithm, firstly, a quadratic approximate function is formed and design point is determined with First Order Reliability Method. Secondly, a point close to the exact limit state function is searched using the design point. Lastly, vector projected method is used to generate the sample points and Second Order Reliability Method is performed to obtain reliability index and probability of failure. Five numerical examples are selected to illustrate the proposed algorithm. The limit state functions of three examples (cantilever beam, highly nonlinear limit state function and dynamic response of an oscillator) are defined explicitly and the others (frame and truss structures) are defined implicitly. ANSYS finite element program is utilized to obtain the response of the structures which are needed in the reliability analysis of implicit limit state functions. The results (reliability index, probability of failure and limit state function evaluations) obtained from the improved response surface are compared with those of Monte Carlo Simulation, First Order Reliability Method, Second Order Reliability Method and Classical Response Surface Method. According to the results, proposed algorithm gives better results for both reliability index and limit state function evaluations.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.9
• /
• pp.2242-2251
• /
• 1993

The mesh-based frictional contact model has been developed which does not rely on the spatial derivatives of the tool surface. Only points on the surface are evaluated from the description. which can then be simplified because of the relaxed demands placed on it. The surface tangents, normals, and corresponding derivatives at each finite-element node are evaluated directly from the finite-element mesh, in terms of the connecting nodal positions. The advantages accrue because there is no longer a need for a smooth tool surface to assure reasonable normals and derivatives. Furthermore, it can be shown that the equilibrium equations can only be properly written with a special normal derived from the mesh itself. The validity, accuracy, computation time, and stability of mesh-based contact model were discussed with the numerical examples of rounded flat-top and rough, flat-top rounded punch forming operations. Also, the forming process of a automobile inner panel section was simulated for testing the robustness of new contact model. In the discussion, the superiority of new model was examined, comparing with tool-based contact one.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.53 no.3
• /
• pp.143-151
• /
• 2004

High-speed permanent magnet machines are likely to be a key technology for electric drives and motion control systems for many applications, since they are conductive to high efficiency, high power density, small size and low weight. In high-speed machines, the permanent magnets are often contained within a retaining sleeve. However, the sleeve and the magnets are exposed to high order flux harmonics, which cause parasitic eddy current losses. Rotor losses of high-speed machines are of great importance especially in high-speed applications, because losses heat the rotor, which is often very compact construction and thereby difficult to cool. This causes a danger of demagnetization of the NdFeB permanent magnets. Therefore, special attention should be paid to the prediction of the rotor losses. This paper is concerned with the rotor losses in permanent magnet high-speed machines that are caused by permeance variation due to stator slotting. First, the flux harmonics are determined by double Fourier analysis of the normal flux density data over the rotor surface. And then, the rectilinear model was used to calculate rotor losses in permanent magnet machines. Finally, Poynting vector have been used to investigate the rotor eddy current losses of high-speed Permanent magnet machine.

• Journal of the Korea Computer Industry Society
• /
• v.6 no.2
• /
• pp.373-378
• /
• 2005

Computer-Mediated Communication (CMC) based on electronic bulletin board system (e-BBS) has been widely used for various educational purposes since the advent of the Internet. Instructors can achieve pedagogical goals by analyzing the contents of postings. They can be benefited technically from analytic information on discussion activities. Studies on content analysis and social presence in communication have been traditionally done by social studies. However, researches on computational and logical analysis of the phenomenon are rare. To do that we propose a formal model to represent and analyze communication activities logically. The model consists of interactivity vector providing a formal representation of discussion activities and interactivity chart providing a graphical representation of interactivity vector. The formal approach can be used as a useful technical assistance to analyze and compare discussion groups computationally.