• Transactions of the Korean Society of Automotive Engineers
• /
• v.7 no.6
• /
• pp.231-240
• /
• 1999

The most important thing to be considered in designing stop lamps for automobiles is to satisfy the photometric requirement in various countries and achieve the equal image. To meet these requirements, parabolic reflector and fish-eye optics has been widely applied. The form of the embodied optic is most important in satisfying the photometric requirement and achieving the equal image because the impact of fish-eye optic is decisive. In this study, a series of researches has been performed to optimize of the fish-eye optic by analyzing beam pattern through the photometric simulation based on CATAI program. The optimized results have been shown to meet the various photometric requirements including non dazzling condition considering the following car. The methodology of this study is excepted to influence the development procedure of light system. The time and cost for the system development would be greatly saved by suing this simulaion technique.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 1998.11a
• /
• pp.71-75
• /
• 1998

The objective of this study is to investigate geochemical characteristics of mine wastes including tailings in various abandoned mines in Korea. Tailings and wastes were sampled in and around 39 metalliferous mines, and analysed heavy metal concentrations including Cd, Cu, Pb and Zn extracted by 0.1N HCl and aqua regia by Atomic Absorption Spectrometry. Measurements of paste pH and lime requirement were carried out to examine a general geochemical characteristics of the materials. Lots of mine wastes were characterized by very low pH values of 2 to 4 and high lime requirement to control neutralization of the wastes. In addition, elevated levels of heavy metals were found in various mine wastes extracted by both 0.lN HCl and aqua regia. Because the mine wastes can be dispersed into the downstream by clastic movement and wind-blow, it is necessary to control the materials with a proper method for their reclamation.

• KIPS Transactions on Computer and Communication Systems
• /
• v.9 no.2
• /
• pp.25-30
• /
• 2020

The thermal image system was widely used in the defence-related industry because of detect infrared light from the object without light. but, as the demand in the security system and automobile market increases, the civilian industry are expanding to the private sector. There are difficult to apply various requirement because of previous systems are based by FPGA, so it need new system that apply to various requirement. The proposed paper is thermal image processing system using common image processor. It has various requirement and scalable to support image input/output interface and device driver. If it is used to proposed system, it reduce development cost and period than previous system based FPGA. Because there has very high accessibility. In addition, it expect to have satisfaction of customer requirements, development cost, development period, release date of product.

• Korean Journal of Soil Science and Fertilizer
• /
• v.1 no.1
• /
• pp.117-123
• /
• 1968

A simplest and best method to find out lime requirement for Korean soils is described. Twenty six top soil samples were collected from various localities and chemical characteristics were dertermined. Three different buffer curve methods were employed as the standard to find out the most reliable test for lime requirement. In addition, the lime requirement test by the Shoemaker's and Woodruff's as well as the O.R.D. kit method were compared with the most reliable buffer curve method. The results may be summarized as follows. 1. The regression equation of the most reliable lime requirement by buffer curve method, y, on percent base saturation of various soils, X, was y=9.69-0.106 X and the negative correlation coefficient r=-0.84 was statistically significant at 5% level. 2. Lime requirement test by the best, buffer curve, method was more well correlated with the sum of exchangeable hydrogen and exchangeable aluminum contents of the soil samples than the exchangeable hydrogen content only. 3. The ordinary buffer curve method for lime requirement is more reasonable than the lime requirement test by the buffer curve prepared after addition of 1 normal potassium chloride or calcium chloride solutions. 4. The lime requirement tests by the most reasonable buffer curve method, X, and by the Woodruff's, the Shoemaker's and O.R.D. kit were compared. The best method for laboratory lime requirement test was the Shoemaker's method and the O.R.D. kit method also was good enough for the field test and these two method are recommended as the unified method of lime requirement test in each soil testing laboratories throughout Korea.

• Journal of Biosystems Engineering
• /
• v.9 no.2
• /
• pp.1-7
• /
• 1984

The engines mounted on power-tillers are used as power source in various kinds of works such as plowing, harrowing, transporting, spraying, water pumping and threshing, etc. But the engines have not been used effectively from a standpoint of fuel consumption because of lack of proper power transmission system and lack of understanding of fuel consumption characteristics of the engines. Therefore, this study was attempted to establish proper power transmission system between the power-tiller engines and various implements. In order to accomplish the above objective, firstly, power requirement and pulley sizes for various implements, which are driven by the power-tiller engines, were investigated to find out whether the power transmission system is proper. Secondly, partload variable engine-speed test was conducted for 3 different sizes of diesel engines to measure to specific fuel consumption. Thirdly, the present power transmission systems were analyzed in terms of specific fuel consumption, and proper power transmission systems were suggested for various implements. The results of this study are summarized as follows: 1. Power requirement for each fixed-type implement of power-tiller varied from 1.5 ps to 11 ps according to its type and operating conditions, but generally in the range of 2.5 ps to 7 ps. 2. Each power tiller and implement were equipped with only one size of pully with few exeptions. With the present power transmission systems, the engines can't be utilized effectively in terms of fuel economy. The pulley size of engine or implement should be diversified to provide the optimum engine speed for different implements. 3. For a diesel eninge with the rated power output of 6 ps, the optimum engine speed to minimize specific fuel consumption was 2200 rpm for the power reguirement in the range of 6 ps or more, 1700 rpm in the range of 4 to 6 ps, and 1200 rpm in the range of 4 ps or less. 4. For a diesel engine with the rated power output of 8 ps, the optimum engine speed was 2200 rpm for the power requirement in the range of 7 ps or more, 1700 rpm in the range of 4.8 to 7 ps, and 1200 rpm in the range of 4.8 ps or less. 5. For a diesel engine with the rated power output of 10 ps, the optimum engine speed was 2200 rpm for the power requirement in the range of 8.4 ps or more, 1700 rpm in the range of 5.4 ps to 8.4 ps, and 1200 rpm in thr range of 5.4 ps or less. 6. Provided the existing implements are dirven by 8 ps diesel engines, the optimum size of engine pulley should be larger than 120mm for the works of requiring less than 4 ps and 90-110mm for the works requiring 4.5-6.5 ps in order to minimize fuel consumption.

• Journal of KIISE:Software and Applications
• /
• v.37 no.5
• /
• pp.411-415
• /
• 2010

The Conflicts between requirements may cause a failure of functions or even project. Currently, most of researches have focused on identifying requirements and some researchers have tried to resolve requirements conflicts but it was only based on requirement priority. This paper proposes the Creative Requirements Conflict Resolution (CRRC) to resolve requirement conflicts in a creative way using TRIZ methodology. TRIZ, which means the theory of solving inventor's problems, is made based on the analysis of over 2 million patent cases and helpful for developing a creative solution to resolve conflicts. CRRC classifies requirement conflicts into groups and then apply TRIZ theory related to each group. At the result of control experiment, CRRC provides the various kinds of creative solution for requirement conflicts.

• Journal of KIISE:Computing Practices and Letters
• /
• v.8 no.6
• /
• pp.657-668
• /
• 2002

Software life cycle consists of requirement analysis, design, implementation, and maintenance phases, and the product of each phase has various format. The UML normalizes such products, and the class diagram, use case diagram, activity diagram and collaboration diagram are usually used for the requirement analysis phase. Because most of UML development tools store such diagrams in a file, there nay be some difficulties of information retrieval and co-work among users. To cope with the difficulties, this paper proposes a database supported methodology to store and manage the diagrams produced by the requirement analysis. In this methodology, the constituents of class, use case, activity and collaboration diagram are first analyzed and then transformed in the form of relational fables. The constituents of such diagrams are stored as tables in a database, and can be easily retrieved from the database by using some queries. This database supported methodology provides the concurrent sharing and high reuse of diagrams.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.38 no.4
• /
• pp.22-29
• /
• 2015

Many enterprises have been adopting management systems good enough for them and operating the schemes to have competitive edge better than their competitor. One of the finest systems that most companies have been selecting is ISO 14001. ISO 14001, environment management system, is widely known as advancing internal efficiency and productivity in the various industries. As a result, the number of companies that have adopted ISO 14001's certification have been increasing continuously year by year since ISO 14000 standard was called in 1994s from ISO 18000 standard that originally used. The purpose of this study is to present that ISO 14001's requirement execution influences on management performance in the small manufacturer. In order to carry out this research, we obtained 96 survey sheets and inspected ten assumptions based on the reliability, validity of the questionnaires. The results of regression analysis are summarized as follows; First, the three factors of ISO 14001 requirement, plan, implementation and operation and management consideration, have an important effect on the operational performance. Second, the three elements of ISO 14001 requirement, environment policy, implementation and operation and management consideration, affect to the financial performance significantly. Based on the results, it is sure that the companies that execute the factors of implementation and operation and management policy have a good performance to achieve operational and financial performance so that it is important to clarify the member's role, authority and follow the procedure by a company's process. Also, the truth shows CEO's continuous will and periodical review of ISO 14001 influence on management performance as well.

• Convergence Security Journal
• /
• v.22 no.5
• /
• pp.95-105
• /
• 2022

The Army, Navy, and Air Force are making various efforts to develop a weapon system that incorporates the 4th industrial revolution technology so that it can be used in multi-domain operations. In order to effectively demonstrate the integrated combat power through the weapon system to which the new technology is applied, it is necessary to establish a network environment in which each weapon system can transmit and receive information smoothly. For this, it is essential to analyze the Information Exchange Requirement(IER) of each weapon system, but many IER analysis studies did not sufficiently reflect the various considerations of the actual tactical network. Therefore, this study closely analyzes the research methods and results of the existing information exchange requirements analysis studies. In IER analysis, the size of the message itself, the size of the network protocol header, the transmission/reception structure of the tactical network, the information distribution process, and the message occurrence frequency. In order to be able to use it for future IER prediction, we present a technique for calculating the information exchange requirement as a probability distribution using the Poisson distribution and the probability generating function. In order to prove the validity of this technique, the results of the probability distribution calculation using the message list and network topology samples are compared with the simulation results using Network Simulator 2.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.1523-1529
• /
• 2011

Light Rail Transit is system that offer target Performance and function because various sub-system such as vehicles, power supply, signaling, communication, mechanical, track, civil is consisted as large complex system. Light Rail Transit and the complex system of safety, reliability to be a behavior, and target performance and function properly to system's configuration, design, manufacture, installation and test verification, through operations system requirements to accurately describe what It is more important. With this study, light rail system KSX ISO/IEC 15288 system life cycle process by applying engineering techniques utilizing light rail system in the early stages of construction from the concept, design, production, operation, maintenance and end-use to the disposal stage throughout the entire life cycle, from the beginning of construction until the end of construction of the stakeholder to define requirements, analyze the introduction of the system developers and system requirement of those who wish to be described accurately by selecting the best system and system requirement in order to achieve their purpose.