• The Journal of Advanced Prosthodontics
• /
• v.7 no.2
• /
• pp.151-159
• /
• 2015

PURPOSE. To describe and characterize the surface topography and cleanliness of CAD/CAM manufactured zirconia abutments after steaming and ultrasonic cleaning. MATERIALS AND METHODS. A total of 12 ceramic CAD/CAM implant abutments of various manufacturers were produced and randomly divided into two groups of six samples each (control and test group). Four two-piece hybrid abutments and two one-piece abutments made of zirconium-dioxide were assessed per each group. In the control group, cleaning by steam was performed. The test group underwent an ultrasonic cleaning procedure with acetone, ethyl alcohol and antibacterial solution. Groups were subjected to scanning electron microscope (SEM) analysis and Energy-dispersive X-ray spectroscopy (EDX) to verify and characterize contaminant chemical characterization non- quantitatively. RESULTS. All zirconia CAD/CAM abutments in the present study displayed production-induced wear particles, debris as well as organic and inorganic contaminants. The abutments of the test group showed reduction of surface contamination after undergoing an ultrasonic cleaning procedure. However, an absolute removal of pollutants could not be achieved. CONCLUSION. The presence of debris on the transmucosal surface of CAD/CAM zirconia abutments of various manufacturers was confirmed. Within the limits of the study design, the results suggest that a defined ultrasonic cleaning process can be advantageously employed to reduce such debris, thus, supposedly enhancing soft tissue healing. Although the adverse long-term influence of abutment contamination on the biological stability of peri-implant tissues has been evidenced, a standardized and validated polishing and cleaning protocol still has to be implemented.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.2
• /
• pp.561-568
• /
• 2023

Various defects occur in concrete structures due to internal and external environments. If there is a defect, it is important to efficiently identify and maintain it because there is a problem with the structural safety of concrete. However, recent deep learning research has focused on cracks in concrete, and studies on exfoliation and contamination are lacking. In this study, focusing on exfoliation and contamination, which are difficult to label, four models were developed and their performance evaluated through unlabelling method, filtering method, the convergence of transfer learning based k-means clustering. As a result of the analysis, the convergence model classified the defects in the most detail and could increase the efficiency compared to direct labeling. It is hoped that the results of this study will contribute to the development of deep learning models for various types of defects that are difficult to label in the future.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.10a
• /
• pp.213-215
• /
• 2022

Recently, deep learning technology that processes images has been widely used in fire detection, autonomous driving, and defective product detection. In particular, in order to determine whether a product is contaminated or not, it can be identified through the contaminants passed from the existing sensor data, but technologies for recognizing cracks in products or contaminants themselves as images are being actively studied in various fields. In this paper, a system for classifying uncontaminated normal cups and contaminated cups through images was designed and implemented. The image was analyzed using an open image and a photographed image, and the image was analyzed by extracting the upper part of the cup image using Google Objectron for 3D object recognition. Through this study, it is thought that it will be used in various ways for research that can extract the contamination level of products required in the hygiene field based on images.

• Journal of Food Hygiene and Safety
• /
• v.15 no.3
• /
• pp.204-208
• /
• 2000

The contamination levels of food poisoning bacteria was investigated from 350 samples of beef, 338 samples of pork, and 360 samples of chicken during the period from March 1996 to October 1998. The contamination levels of pathogenic organisms were higher in refrigerated meat than packed frozen meat and were relatively higher in chicken and packed meat than in beef The highest level detected for each of the various pathogens was . less than 10,000 cfu/g for Staphylococcus aureus : less than 0.9 MPN/g for Salmonella and Literia monocytogenes: 7MPN/g for Campylobacter jejuni /coli. In the comparisions of cross- contamination ratio of tested meat for low species food poisoning bacteria 14.3% of beef, 23.5% of pork and 55.0% of chicken were contained only one species of pathogen, whereas 2.7 of beef, 5.6% of pork and 14.7% of chicken contained two species and 2.3% of pork contained a total of three species. Generally, pathogens was encounted higher isolation freguency in packed frozen chicken meat than in chilled chickens.

• Korean Journal of Pharmacognosy
• /
• v.48 no.1
• /
• pp.56-62
• /
• 2017

The aim of this study was to screen the contamination by ochratoxin A of mycotoxins in various medicinal herbs. We conducted a survey of ochratoxin A in medicinal herb on the retail market in Incheon in 2016. 116 medicinal herb samples were evaluated for the ochratoxin A contamination. They were analyzed for ochratoxin A using immunoaffinity column and high-performance liquid chromatography(HPLC)-fluorescence detection and the positive samples were confirmed using HPLC-tandem mass spectrometry. Ochratoxin A was detected in 4 medicinal herb samples; the concentrations of ochratoxin A were containing between 20.11 and $372.90{\mu}g/kg$. This study shows that in general, this kind of commodity may be contaminated by mycotoxins. Also this contamination is not limited to only aflatoxin of mycotoxins.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.18 no.2
• /
• pp.70-79
• /
• 2013

Since crude oil contains various pollutants including heavy metals, the environmental impact should be assessed for heavy metals as well as oil itself. In order to estimate the extent of heavy metal contamination, surface sediments were collected at the intertidal and coastal zone around the Herbei sprit oil spill area during December 2007 and January 2008. Organic carbon, sulfur and heavy metals were determined to assess heavy metal contamination in sediments. The crude oils contained C, S, V and Ni, but little toxic metals such as As, Cd, etc. From organic carbon content, the highest contaminated site was estimated that oils contributed to sediments up to 10%, and this site showed high V concentration. Potentially contaminated sediments by crude oil could be differentiated from unaffected sediments through V/Al and Ni/Al ratios, which can be used as indicators of oil contamination even after the oils were fully degraded.

• Tribology and Lubricants
• /
• v.33 no.6
• /
• pp.263-268
• /
• 2017

The significance of maintaining the soil environment is gradually increasing owing to soil and underground water contamination by petroleum leak accidents. However, the purification of soil is an expensive and more time-consuming process than the purification of contaminated water and air. Moreover, determining the source and people responsible for soil pollution gets often embroiled in legal conflicts, further delaying the cleanup process of the contaminate site. Generally, TPH (total petroleum hydrocarbon) pattern analysis is used to determine the petroleum species and polluter responsible for soil contamination. However, this process has limited application for petroleum products with a similar TPH pattern. In this study, we analyze the TPH pattern and specific sectional ratio (${\sim}C_{10}$, $C_{10}-C_{12}$, $C_{12}-C_{36}$, and $C_{36}{\sim}$) of various domestic petroleum products to identify the petroleum product responsible for soil contamination. Also, we perform BTEX (benzene, toluene, ethyl benzene, xylene) quantitative analysis and determine B:T:E:X ratio using GC-MS. The results show that gasoline grade 1 and 2 have a similar TPH pattern but different BTEX values and ratios. This means that BTEX analysis can be used as a new method to purify soil pollution. This complementary TPH and BTEX method proposed in this study can be used to identify the petroleum species and polluters present in the contaminated soil.

• Economic and Environmental Geology
• /
• v.29 no.3
• /
• pp.335-343
• /
• 1996

The dipole-dipol electrical resistivity survey was conducted to investigate the probable contamination of the Han river by leachate from the near-by Nanjido Landfill. The survey line of 3 km was set along the unpaved road toward the Han river. For the convenience of the field work, the survey line was divided into four segments. The complete two-dimensional resistivity section was constructed by connecting the inversion result of each segment. Gravity survey was also carried out along the profile parallel to the resistivity line. Near surface resistivity generally appeared to be of very low value in most part of the survey area and the boundary between the alluvium layer and underlying basement rocks is well discriminated on the resistivity section. These results agree well with those of the preceding Schlumberger depth sounding made at adjacent area by Lee and fun (1995). The variation of thickness of the alluvium layer delineated by gravity anomaly profile also correlates well with the result of the resistivity survey on the qualitative basis. The problem of contamination by leachate from the Nanjido Landfill, where various waste materials have been dumped without any proper treatment facilities, has been remains unsolved yet. Therefore, we present the most probable passages of leachate flow based on the survey results and have briefly discussed about measure for contamination control. Considering the thickness of alluvium and the possible existence of fractured zone, the middle point between 1st and 2nd landfill and the midst of 1st landfill are the most hazardous regions to make leachates flow into the Han river. Since large amounts of leachates are observed from the test wells located on the lines extending from the border between the 1st and 2nd landfill and the middle of the lst landfill, contamination protection barriers are strongly recommended near these regions.

• Journal of Soil and Groundwater Environment
• /
• v.18 no.1
• /
• pp.112-122
• /
• 2013

Current status of soil contamination with fluorine and its source were investigated. The basic principles and procedures of various techniques for the analysis of fluorine contents in soil and solid phase samples were summarized in this review. Analysis of fluorine in solid matrices can be achieved by two types of techniques: (i) UV/Vis spectrophotometer or ion selective electrode (ISE) analysis after performing appropriate extraction steps and (ii) direct solid analysis. As the former cases, the standard method of Korean ministry of environment, alkali fusion-ISE method, pyrohydrolysis, oxygen bomb combustion, aqua regia digestion-automatic analysis, and sequential extraction-ISE method were introduced. In addition, direct analysis methods (i.e., X-ray fluorescence spectrometry and proton induced gamma-ray emission spectrometry) and atomic spectrometry combining with the equipment for introducing solid phase sample were also reviewed. Fluorine analysis techniques can be reasonably selected through site-specific information such as matrix condition, contamination level, the amount of samples and the principles of various methods for the analysis of fluorine presented in this review.

• Journal of Microbiology and Biotechnology
• /
• v.20 no.2
• /
• pp.229-237
• /
• 2010

Recently, many cases related to viral gastroenteritis outbreaks have been reported all over the world. Noroviruses are found to be leading as the major cause of outbreaks of acute gastroenteritis. Patients with acute gastroenteritis are normally found to be positive with norovirus when the stools and vomit are analyzed. This paper reviews various activities and previous reports that describe norovirus contamination in various food matrixes and the relationship between food handlers. Lately, a numbers of norovirus outbreaks have been reported that are involved with fresh produce (such as vegetables, fruits), shellfish, and prepared food. Food produce processed by infected food handlers may therefore become easily contaminated. In addition, foods that required much handling and had been eaten without heat treatment gave the high risk for getting foodborne illnesses. The standard method for detection of norovirus has already been available for stool samples. However, only a few methods for detection of norovirus in food samples have been developed until now.