• 제목/요약/키워드: Varied Section

검색결과 283건 처리시간 0.028초

가변단면 압출기 제조와 그에 따른 성형실험 및 유한요소 해석 (Fogrming Experiment using Improved CNC Extruder and FE Analysis in Varied Section Extrusion Process)

  • 최호준;임성주;신희택;최석우
    • 한국소성가공학회:학술대회논문집
    • /
    • 한국소성가공학회 2007년도 추계학술대회 논문집
    • /
    • pp.128-131
    • /
    • 2007
  • It is very important that there are saving resource and energy in the future as well as in these day. Weight saving of structural parts, which are formed by extrusion, plays a key role in manufacturing field. Especially these aluminum parts used in the car need other processes to vary the cross section in the axial direction. Thus, applications of these parts are limited by high cost. if the cross section of the parts is variable by only extrusion, application of extruded aluminum parts will more increase. Therefore, a new CNC extruder which can control the section area of a car part was invented the nation's first. Using the extrusion machine, the experiment and FE analysis were performed during the varied section extrusion process.

  • PDF

동지나해 어장의 회전 조류에 관하여 (A Study on the Rotary Tidal Current in the East China Sea)

  • 김진건
    • 수산해양기술연구
    • /
    • 제22권2호
    • /
    • pp.1-6
    • /
    • 1986
  • Even though it is well known that the tidal current in the East China Sea rotates clockwise, few report can be found about the precise pattern of it. To furnish some information available for the stow net fishermen, the author carried out the observation over 235 semidiurnal tidal cycle to investigate the pattern of the set and the rate of tidal current in the Korean fishing section 250 and 494, by reading the current meter and by tracing the corner reflectors with radar onboard the anchored obsen'ation vessel, from May 12, 1984 through February 27, 1986. The results obtained are as follows: 1. The mean semidiurnal tidal cycle was 12 h 20 m during spring tide, and 12 h 30 m during neap tide. 2. The mean interval from the calculated time of high water until the current began to set north was 2 h 30 m and 2 h 15 m in the fishing section 250 and 494 respectively, and the mean interval from the time of low water current began to set south was about 2 h 0 m in both sections. 3. In comparison of the occupied times to vary the set from one of 8 principal bearing points to the neighboring one, the shortest was while the set varied from N to NE and S to SW in the section 250 and 494 respectively. Contrary the longest was while the set varied from SE to S and from W to NW in the section 250 and 494 respectively. 4. In comparison of the rate while the set varied from one of 8 principal bearing points to the neighboring one, the fastest was while the set varied from SE to Sand NW to N in the section 250, and E to SE and W to NW in the section 494. Contrary the slowest was while the current set to NE and S W in the section 250, and N, NE and S W in the section 494.

  • PDF

CNC 제어 가변단면 압출기 개발 (CNC Extruder for Varied Section Products)

  • 최호준;임성주;신희택;최석우
    • 한국소성가공학회:학술대회논문집
    • /
    • 한국소성가공학회 2007년도 춘계학술대회 논문집
    • /
    • pp.246-249
    • /
    • 2007
  • It is very important that there are saving resource and energy in the future as well as in these day. Weight saving of structural parts, which are formed by extrusion, plays a key role in manufacturing field. Extruded aluminum parts' cross sections are constant in the axial direction by conventional extrusion method. Especially these aluminum parts used in the car need other processes to vary the cross section in the axial direction. Thus, applications of these parts are limited by high cost. if the cross section of the parts is variable by only extrusion, application of extruded aluminum parts will more increase. Therefore, a new CNC extruder which can control the section area of a car part was invented the nation's first. Using the extrusion machine, the experiment was performed to validate the workability.

  • PDF

지반과 구조물사이의 상호작용을 고려한 변단면 도통형쉘의 해석 (I) -변단면 쉘의 역학적 특성 (I)- (An analysis of ground supported farm silo with variable thickness (I) -Part I mechanical characteristics of shell with Variable thickness-)

  • 조진구;조현영
    • 한국농공학회지
    • /
    • 제31권4호
    • /
    • pp.58-71
    • /
    • 1989
  • This study aims to develop a computerized program for analysis of the ground-supported cylindrical shell structure with step varied section and to find out its mechanical characteri- stics through application of the developed program to the analysis of a ensiled farm silo as a model structure. The thickness of wall and bottom-plate of farm silo is assumed to be step-varied and its detailed structural dimensions are presented in Tab. 1 and 2. Several numerical case studies show that sectional stresses of the sample structures are largely reduced by adopting "varied section" design technique. And, other major results ob- tained from this study are summarize4 as follows ; 1. The variation of wall-thickness has a great influence on bending stresses of wall. Ho- wever, the larger the relative thickness of bottom-plate is, the smaller the influence is. 2. The magnitude of thickness of projecting toe of bottom-plate has negligible effect on sectional stresses 3. The conventional design methodology, which assumes the bottom edge of wall as clam- ped on ground, is proved to be discarded through the numerical analysis. 4. It is found that the "varied section" design technique should get similar effects as in the case of thick bott6m-plate having uniform thickness. 5. The variation of wall-thickness has a considerable effect on the bending stresses of bo- ttom-plate. Especially, this phenomenon is very remarkable in its projecting toe. In some cases. the negative bending moment may be acted on.

  • PDF

선형 배수로에 대한 부등류 해석 (Varied Flow Analysis for Linear Drainage Channels)

  • 구혜진;전경수
    • 한국수자원학회논문집
    • /
    • 제41권8호
    • /
    • pp.773-784
    • /
    • 2008
  • 본 연구는 노면배수시설에 이용될 수로 양단에 유출구를 가지며 유량이 연속적으로 증가하는 선형 배수로의 부등류 흐름의 해석 방법을 정립하기 위하여 수행되었다. 지배 방정식으로서 유한 차분 형태의 대수방정식을 사용하여 지배단면에서의 수심 값을 경계조건으로 Newton-Raphson 방법에 의하여 수면곡선을 계산하였다. 하류단에 유출구를 갖는 수로와 수로 양단에 유출구를 갖는 수로를 고려하고, 다양한 종단경사에 대하여 흐름 해석을 수행하였다. 단, 양단에 유출구를 갖는 수로의 경우 양단을 지배단면으로 만드는 임계 종단경사를 조사하여 이보다 작은 종단경사에 대한 흐름 해석을 수행하였으며, 임계경사는 지배단면의 위치와 종단경사의 관계로부터 결정하였다. 하류단에 하나의 유출구를 갖는 수로의 경우 수로 상에 존재하는 지배단면의 위치를 조사하여 그 지점을 기준으로 상류 및 하류 방향으로 수심을 계산한다. 반면 양단에 유출구를 갖는 수로의 경우 지배단면이 수로 양단이라면 분수계를 가정하여 분수계를 기점으로 구분되어지는 상류측 및 하류측 수로에 대한 흐름 해석을 수행하고, 상류단에서 분수계 방향으로 그리고 하류단에서 분수계 방향으로 계산된 분수계 지점의 두 수심이 동일할 때까지 흐름 계산을 반복한다. 흐름 계산 결과 양단에 유출구를 갖는 수로가 임계경사보다 큰 경사로 설치된 경우에는 하류단에 유출구를 갖는 수로의 흐름 거동과 유사지는 것으로 판단되었다. 노면배수시설 설계의 중요한 요소인 최대수심은 종단경사가 작을 때 등류 해석으로 계산된 값이 부등류 해석보다 크게 산정되었으며, 이는 종단경사가 작을 때 등류 해석을 기반으로 한설계가 과대설계가 되기 쉽다는 것을 의미한다.

Shear lag effect of varied sectional cantilever box girder with multiple cells

  • Guo, Zengwei;Liu, Xinliang;Li, Longjing
    • Structural Engineering and Mechanics
    • /
    • 제84권3호
    • /
    • pp.295-310
    • /
    • 2022
  • This paper proposes a modified bar simulation method for analyzing the shear lag effect of variable sectional box girder with multiple cells. This theoretical method formulates the equivalent area of stiffening bars and the allocation proportion of shear flows in webs, and re-derives the governing differential equations of bar simulation method. The feasibility of the proposed method is verified by the model test and finite element (FE) analysis of a simply supported multi-cell box girder with constant depth. Subsequently, parametric analysis is conducted to explore the mechanism of shear lag effect of varied sectional cantilever box girder with multiple cells. Results show that the shear lag behavior of variable box-section cantilever box girder is weaker than that of box girder with constant section. It is recommended to make the gradient of shear flow in the web with respect to span length vary as smoothly as possible for eliminating the shear lag effect of box girder. An effective countermeasure for diminishing shear lag effect is to increase the number of box chambers or change the variation manner of bridge depth. The shear lag effect of varied sectional cantilever box girder will get more server when the length of central flanges is shorter than 0.26 or longer than 0.36 times of total width of top flange, as well as the cantilever length exceeds 0.29 times of total length of box's flange. Therefore, the distance between central webs can adjust the shear lag effect of box girder. Especially, the width ratio of cantilever plate with respect to total length of top flange is proposed to be no more 1/3.

Comparison of electrophoretic karyotypes in fusarium

  • Min, Byung-Re
    • Journal of Microbiology
    • /
    • 제33권4호
    • /
    • pp.334-338
    • /
    • 1995
  • The electrophoretic karyotypes of 6 species in different Fusarium sections were examined by using contour-clamped homogeneous electric field (CHEF) gel electrophoresis. Intact chromosomal DNA was prepared from protoplasts and up to 9 distinct bands were separated on 0.7% or 0.8% agarose gel under several different conditions. Putative chromosome numbers varied from 6 to 9 amd polymorphic karyotypes were observed in different Fusarium sections. Using Schizosaccharomyces pombe and Saccharomyces cerevisiae chromosomes as standards, the sizes of the Fusarium spp. chromosomes were estimated. The electrophoretic karyotypes of F. moniliforme and F. subglutinans (section Liseola) were similar. Unidentified filamentour fungi, F. beomiforme was much closer to F. axysporum (section Elecgans) in karyotype and the karyotypes of F. napiforme were more similar to those of section Liseola than any other sections. F. graminearum (section Discolor) had a distinctive electrophoretic karyotype.

  • PDF

모형 가스터빈 연소기에서의 연소 불안정 모드 분석에 관한 실험적 연구 (An Experimental Study of Instability Mode Analysis in a Model Gas Turbine Combustor)

  • 이장수;김민기;박성순;이종근;윤영빈
    • 한국연소학회지
    • /
    • 제15권1호
    • /
    • pp.12-21
    • /
    • 2010
  • The main objective of this study was investigation of combustion instability characteristics in a lean partially premixed gas turbine dump combustor. Dynamic pressure transducers were located on combustor and inlet section to observe combustion pressure oscillation and difference at each measurement places. Also flame shape and $CH^*$ chemiluminescence were measured using a high speed ICCD camera. The combustor length was varied in order to have different acoustic characteristics from 800 to 1090 mm. The first section of this paper shows the stability map in model gas turbine combustor. And the effects of combustor length, mixture velocity in the mixing section and equivalence ratio were studied by the pressure perturbation and heat release oscillation. Also, the instability frequency and mode analysis were studied in last two sections. We observed two dominant instability frequencies in this study. Lower frequencies were obtained at lower equivalence ratio region and it was associated with a fundamental longitudinal mode of combustor length. Higher frequencies were observed in higher equivalence ratio conditions. It was related to secondary longitudinal mode of combustor and mixing section. In this instability characteristics, pressure oscillation of mixing section part was larger than pressure oscillation of combustor. As a result, combustion instability was strongly affected by acoustic characteristics of combustor and mixing section geometry.

암모니아의 수평관내 단상 및 응축 열전달계수의 측정 (Measurement of Single Phase and Condensation Heat Transfer Coefficients of Ammonia in a Horizontal Tube)

  • 백영진;장영수;김영일
    • 설비공학논문집
    • /
    • 제12권6호
    • /
    • pp.561-569
    • /
    • 2000
  • Single phase and condensation heat transfer characteristics of ammonia in a horizontal tube have been investigated experimentally The horizontal test section is composed of smooth SUS316 tube for refrigerant flow, surrounding annulus for water flow, and temperature and Pressure measuring sensors. For single phase test, subcooled ammonia mass flux was varied from 320 to 501 kg/mrs and temperature was varied from 18 to $47^{\circ}C$. For condensation test, mass flux and saturation temperature were varied from 86 to 128 kg/$m^2$s and 34 to $47^{\circ}C$, respectively. The equations of Gnielinski Soliman et al., Traviss et at., Cavallini and Zecchin, Shah, Chen et al., Tandon et al., and Chilli and Anand were compared with the experimental data. New correlations are proposed based on the experimental results and the absolute mean deviation of the experimental data becomes 1.0% for single phase test and 4.9% for condensation test.

  • PDF