• Journal of Bio-Environment Control
• /
• v.23 no.2
• /
• pp.158-166
• /
• 2014

This experiment has investigated suitable methods to improve precision water content monitoring of coconut coir substrates to control irrigation by frequency domain reflectometry(FDR) sensors. Specifically, water content changes and variations were observed at different sensing distances and positions from the irrigation dripper location, and different spaces between the FDR sensors with or without noise filters. Commercial coconut coir substrates containing different ratios of dust and chips(10:0, 7:3, 5:5, 3:7) were used. On the upper side and the side of the substrates, a FDR sensor was used at 5, 10, 20, 30cm distances respectively from the irrigation dripper point, and water content was measured by time after the irrigation. In the glass beads, sensors were installed with or without noise filtering. Closer sensing distance had a higher water content increasing rate, regardless of different coir substrate ratios. There were no differencies of water content increasing rates in 10:0 and 3:7 substrates between the upper side and the side. Whereas, 7:3 and 5:5 substrates showed higher increasing rates on the upper side measurements. Substrates with higher ratios of chip(3:7) had lower increasing rates than others. And, with noise filters, the exatitude of measurement was improved because the variation and deviation were reduced. Therefore, in coconut coir with FDR sensors, an efficient water content measurment to control irrigations can be achieved by installing sensors closer to an irrigation point and upper side of substrates with noise filters.

• Korean Journal of Ecology and Environment
• /
• v.46 no.4
• /
• pp.499-506
• /
• 2013

To estimate the effect of algae to particulate organic matter in the upper regions of brackish Lake Sihwa, temporal and spatial variations of particulate organic carbon (POC) and phytoplankton pigments (chlorophyll a; Chl-a, pheophytin-a; Pheo-a), and their relationships were studied at seven sites of the brackish regions from March to October 2005 and 2006. POC concentration varied from 1.0 to $76.6mgL^{-1}$ (mean $7.4mgL^{-1}$), with maximal concentrations occurring in the middle parts of the study area in spring of 2005 and 2006. Concentrations of Chl-a and Pheo-a varied from 1.3 to $942.9{\mu}gL^{-1}$ (mean $71.0{\mu}gL^{-1}$) and $1.4{\sim}1,545.5{\mu}gL^{-1}$ (mean $59.9{\mu}gL^{-1}$), respectively, and corresponded closely with variation in POC. During the study period Pheo-a concentration was 44.2% of total Chl-a, implying that non-living or inactive phytoplankton is also the important part of phytoplankton-derived POC in brackish regions of Lake Sihwa. From the positive linear relationships between POC and phytoplankton pigments (POC with Chl-a (r=0.93), total Chl-a (r=0.88), and Pheo-a (r=0.81)), it is suggested that phytoplankton was a significant component of POC in the upper regions of brackish Lake Sihwa. On the other hand, the ratios of POC/Chl-a and POC/total Chl-a (Chl-a+Pheo-a) were 82.9 and 35.9, respectively. The ratio of POC/total Chl-a is similar to those reported in previous studies, including 40~60 in estuaries. This study suggests that Pheo-a concentration is considered in estimation of POC concentration from phytoplankton pigments in aquatic systems with high content of Pheo-a, like an upper region of blackish Lake Sihwa.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.4 no.3
• /
• pp.215-225
• /
• 1999

To study the vertical variations of major elements, trace elements and rare earth elements(REEs) contents in deep-sea sediments, six cores from Korea Deep-sea Environmental Study area(KODES) were analyzed. Topmost sediment layers of KODES area are divided into two Units; brown-colored and peneliquid Unit I and pale brown-colored and relatively solidified Unit II. Contents of major elements, REEs, Cu, Sr and Rb in each Unit are almost same, while contents of Mn, Ni and Co in Unit I are two or three times higher than those in Unit II. R-mode factor analysis represents that surface sediments are composed of alumino-silicate phase (AI-Ti-K-Mg-Fe-Rb-Ce), apatite phase (Ca-P-Cu-Sr-Trivalent Rare Earth Elements) and Mn-oxide phase(Mn-Ni-Co). Factor scores in silicate and apatite phases in each Unit are nearly same, whereas those in Mn-oxide phase in Unit I is higher than those in Unit II. While NilCu ratio in Unit I is two times higher than that in Unit II. We interprete the geochemical fractionation of Ni and Cu as a result that Ni can be remobilized in oxygen-depleted micro-environment in Units I and II and then easily reprecipitated in Unit I, while most of Cu supplied together with organic material is decomposed mostly in Unit I and sorbed into apatite.

• Korean Journal of Soil Science and Fertilizer
• /
• v.33 no.4
• /
• pp.221-233
• /
• 2000

Evaluation method of soil fertility by application of geographic information system (GIS) which includes landscape characteristics and soil map data was investigated from productivities of red pepper and tobacco grown on the fields with no fertilization. Total 131 fields experiments, 64 fields of red pepper and 67 fields of tobacco were conducted from 22 and 23 fields for red pepper and tobacco, respectively, located at Cheangweon and Eumseong counties in 1996, from 20 and 25 fields at Boeun and Goesan counties in 1997, and 22 and 19 fields at Jincheon and Chungju counties in 1998. All the experimental sites were selected on the basis of wide range of distribution in landscape and soil attributes. Dry weights and nutrients (N, P and K) uptakes by red pepper plant and tobacco leaves were considered as basic fertility of the soil (BFS). The BFS was estimated by twenty-five independent variables including 13 chemical properties and 12 GIS data. Twenty-five independent variables were classified by two groups, 15 quantitative variables and 10 qualitative variables, and were analyzed by multiple linear regression (MLR) of REG and GLM models of SAS. Dry weight of red pepper (DWRP) and dry weight of tobacco leaves (DWTL) every year showed high variations by five times in difference plots with minimum yield and maximum yield indicating the diverse soil fertility among the experimental fields. Evaluation for the BFS by the MLR including independent variables was better than that by simple regression showing gradual improvement by adding chemical properties, quantitative variables, and qualitative variables of the GIS. However the evaluation for the BFS by the MLR showed the better result for tobacco than red pepper. For example the variability in the DWTL by MLR was explained 34.2% by only chemical properties, 35.0% by adding quantitative variables, and 72.5% by adding both the quantitative and qualitative variables of the GIS compared with 21.7% by simple regression with $NO_3-N$ content in soil. Consequently, it is assumed that this approach by the MLR including both the quantitative and qualitative variables was available as an evaluation model of soil fertility for upland field.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.1
• /
• pp.68-74
• /
• 2011

Cauliflower mushroom ($Sparassis$ $crispa$) is being cultivated as a functional mushroom since the mushroom contains larger amount of ${\beta}$-glucan than other edible or medicinal mushrooms. In this study, as a fundamental study for the cultivation process of cauliflower mushroom, we assayed the mycelial growth and the productivity of the mushroom cultivated on the sawdust-based medium made of larch ($Larix$ $kaempferi$) by 4 kinds of medium densities and 6 kinds of particle sizes. Low densities of sawdust-based media (0.68~0.72 g/$cm^3$) showed high variations in mycelial growth at early stage on sawdust-based medium. The coefficient of variance for the mycelial growth decreased from higher than 40% at the 3rd week to lower than 10% at the 7th week. High density of sawdust-based medium (0.80 g/$cm^3$) showed relatively lower variation in the mycelial growth at early stage with less than 30% of coefficient of variance, the high density of sawdust-based medium was thought to be quite stable compared to the lower densities of sawdust-based medium. From the viewpoint of mushroom productivity especially for the goods (excluding bottom of fruiting body), 0.76 g/$cm^3$ was better than any other densities; the return rates of fruiting body from each medium were 12.2, 13.6, 13.1, and 12.0% for 0.80, 0.76, 0.72, and 0.68 g/$cm^3$, respectively. By the way, it took about 40 days for harvesting from primordium formation with the sawdust-based medium excluded the particles less than 1 mm, while it took about 70 days with the medium including the particles less than 1 mm. The yield from the sawdust-based medium with the particles less than 1 mm was also quite less than any other sawdust-based medium especially for the goods. Therefore, we recommend that the sawdust-based medium with larch for the cultivation of cauliflower mushroom be prepared as 0.76 g/$cm^3$ in medium density with excluding the particles less than 1 mm.

• Korean Journal of Ichthyology
• /
• v.4 no.2
• /
• pp.1-25
• /
• 1992

Taxonomic study of the five species (Acanthogobius elongata, A. flavimanus, A. lactipes, A. luridus and Synechogobius) from Korea was carried out based on morphometric, cephalic sensory canal and ecological characters. Taxonomic revision and classificational keys are provided. Synechogobius hasta is easily distinguished from four species of the genus Acanthogobius in eleven characters, i. e., the number of dorsal and anal fin rays, the transverse scales, the vertebral numbers, the formula of interneural spine of the first dorsal fin, the number of interhemal spine anterior to the first hemal spine, the number of epipleural and pleurals, the ratio of caudal peduncle length, the ratio of caudal peduncle depth and the regular variations in the ratio of body parts with the body length. In the genus Acanthobobius, A. elongata is distinguished from other 3 congeneric species in the ratio of body parts and the oculoscapular sensory canal. Moreover, A. flavimanus differs from other 3 congeneric species in the lateral scales, the transverse scales, the number of predorsal scales, the vertebral number, the number of epipleural and pleurals. Sensory papillae rows of S. hasta is not similar that of the genus Acanthogobius in having a singular sensroy papillae rows. A. elongata has no oculoscapular sensory canal D and A. flavimanus has transverse sensory papillae in cheek, and these are one of the unique characters distinguished form other congeneric species. In the spawning period inferred from gonadosomatic index, A. elongata varied from late March to late June ; A. flavimanus, January to April ; A. lactipes, May to September ; A. luridus, early May to early July and S. hasta, early March to early May.

• Journal of Korean Society of Forest Science
• /
• v.89 no.1
• /
• pp.55-64
• /
• 2000

This study was carried out to analyze the characteristics of pH and electrical conductivity(EC) at each stand and soil depth by the artificial acid rain sprinkling in the upper watershed of Mt. Palgong and furthermore to clarify the relationships between forest soil and water purification function. The results obtained in the experimental sites of Quercus acutissima and Larix leptolepis were summarized as follows ; 1. The average soil pH at each soil layer(0~5cm, 0~10cm, 0~20cm in depth) were 4.8, 4.3 and 4.5 for the Quercus acutissima soil and 5.15, 5.19 and 5.21 for the Larix leptolepis soil. The soil pH of Larix leptolepis stand was higher than that of Quercus acutissima stand. In addition, the deeper soil depth was, the higher soil pH was. 2. The soil solution pH of Larix leptolepis stand was higher than that of Quercus acutissima stand. It was due to the high soil pH of Larix leptolepis stand itself and the difference of humus layer thickness. 3. It took time to show the pH buffer capacity of forest soil after application of artificial acid rain in the forest soil. The pH value of soil solution in each experimental site was maximum at this time and then did not increase pH value any more. 4. Soil solution EC increased slowly with pH 3.0 treatment, but it decreased slowly with pH 5.0 treatment over time. It was assumed that the amount of the leached cation and the ions leading buffer action changed at the stands with ranges of acidity treatment. 5. From the trend of soil solution EC at each soil depth, it seemed that the water buffer capacity of the forest soil increased as the soil depth increased.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.16 no.2
• /
• pp.102-114
• /
• 2013

The basin of Lake Shihwa is one of highly industrialized region of Korea and a current environmental issue of study area is the operation of tidal power plant (TPP) to improve water quality. The application of water quality index (WQI) which integrates five physiochemical parameters (transparency, DO, DIN, DIP and chlorophyll-a) of water quality in Lake Shihwa and outer sea during 2011~2012 were performed not only to evaluate the spatial and temporal distribution of the water quality but also to assess the effect of water quality improvement by the operation of tidal power plant. The higher WQI values were observed in monitored sites near the industrial complexes in Lake Shihwa and the outfall of wastewater treatment plants (WWTPs) in outer sea. This indicates that the quality of seawater is influenced by diffuse non-point sources from industrial, municipal and agricultural areas in Lake Shihwa and by point sources from the effluence of municipal and industrial wastewater throughout WWTPs in outer sea. Mean WQI value decreased from 53.0 in 2011 to 42.8 in 2012 of Lake Shihwa. Water quality has improved significantly after TPP operation because enhancement of seawater exchange between Lake Shihwa and outer sea leads to improve a hypoxic condition which is primarily a problem in Lake Shihwa. Mean WQI of outer sea showed similar values between 2011 and 2012. However, the results of hierarchical cluster analysis and the deterioration of water quality in summer season indicate that the operation of tidal power plant was not improved the water quality in the upper most area of Lake Shihwa. To successfully improve overall water quality of Lake Shihwa, it is urgently necessary to manage and reduce of non-point pollution sources of the basin of Lake Shihwa.

• Economic and Environmental Geology
• /
• v.49 no.2
• /
• pp.121-134
• /
• 2016

We characterize the spatial distribution of Cobalt-rich ferromanganese crusts covering the summit and slopes of a seamount in the western Pacific, using acoustic backscatter from multibeam echo sounders (MBES) and seafloor video observation. Based on multibeam bathymetric data, we identify that ~70% of the summit area of this flattopped seamount has slope gradients less than $5^{\circ}$. The histogram of the backscatter intensity data shows a bi-modal distribution, indicating significant variations in seabed hardness. On the one hand, visual inspection of the seafloor using deep-sea camera data exhibits that the steep slope areas with high backscatter are mainly covered by manganese crusts. On the other hand, the visual analyses for the summit reveal that the summit areas with relatively low backscatter are covered by sediments. The other summit areas, however, exhibit high acoustic reflectivity due to coexistence of manganese crusts and sediments. Comparison between seafloor video images and acoustic backscatter intensity suggests that the central summit has relatively flat topography and low backscatter intensity resulting from unconsolidated sediments. In addition, the rim of the summit and the slopes are of high acoustic reflectivity because of manganese crusts and/or bedrock outcrops with little sediments. Therefore, we find a strong correlation between the acoustic backscatter data acquired from sea-surface multibeam survey and the spatial distribution of sediments and manganese crusts. We propose that analyzing acoustic backscatter can be one of practical methods to select optimal minable areas of the ferromanganese crusts from seamounts for future mining.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.24 no.3
• /
• pp.63-74
• /
• 2016

The objective of this study was to investigate the variations of physico-chemical properties during the swine manure composting, sawdust as the bulking agent was composted at different points (Top layer, Side of middle layer, Bottom layer). Air suction system with constant bottom aeration in bench scale reactors (30 L). The highest temperature was reached in the range of $58^{\circ}C$ to $62^{\circ}C$ on $3^{rd}$ day and this thermophilic phase (> $50^{\circ}C$) was continued for 3 days in all the treatment mixtures. However, the temperature was gradually decreased to room temperature at the end of 60 day composting process. Except control, the discharged ammonia ($NH_3$) was a maximum in the treatment order of Top layer>Bottom layer>Side of middle layer as 500 ppm, 162 ppm and 120 ppm, respectively, on the $4^{th}$ day and showing that Top layer point Air suction produce much more ammonia content than the other point. During the composting process, the total Kjeldahl nitrogen (TKN) was gradually increased due to the mass loss in the composting mixtures. At the same time, C/N ratio was decreased to Top layer, 13; Side of middle layer, 12 and Bottom layer, 13 at Air suction points. The significant reduction of C/N ratio in all different air suction system when manure was matured. The $NH_4-N$ to $NO_3-N$ ratio was recorded as 10.52 at the initial stage of the compost mixtures and reduced to 0.97 (Top layer), 0.70 (Side of middle layer), 3.2 (Bottom layer) because of manure decomposition. The overall results revealed that Top layer and Side of middle layer Air suction is a suitable option when compared other point for high quality composts.