• Journal of the Korean Society of Safety
• /
• v.17 no.3
• /
• pp.1-6
• /
• 2002

A dynamic characteristics of shock absorber in the various excitation is investigated experimentally. Work diagrams and characteristic curves are used as a experimental standard. The various excitation conditions temperature and noise are very important factors in associated with the reduction of damping force. It is found that the heat occurrence from shock absorber, the gas shock absorber is much higher than oil shock absorber and increased in high speed. As to the variation of damping force, there are no change when the speed is low but we fixed amount of variation by increasing speed and change of new and old decrease. The sound pressure of the swash noise from cycle of shock absorber, we compared with theory sound pressure by experiment.

• Journal of Applied Reliability
• /
• v.13 no.4
• /
• pp.273-285
• /
• 2013

Because process variations have direct influence on yield rate in process industry, it is very important to understand process variations that occur accidentally. In process industry, quality variation due to the activities of process improvement and maintenance and chance effect such as change of work environment and difference in staffs' craftsmanship are mixed with each other, therefore it is difficult to actually detect minute process variations. In this study, objective and rational methods of detection that can detect minute process variations in process industry were designed referring to various methodologies of process management, and they were verified through similar examples.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.562-564
• /
• 2005

This paper presents the reasonable design parameters of a SRM for hybrid electric vehicle driving. For the design of SRM, the initial model is designed using the equivalent magnetic circuit method. In order to optimize the SRM for HEV. The initial model is redesigned by FEM with the variation of the stock length and turns of winding. This paper shows that a flat-topped current of a phase can be made from a change of the stack length and the number of turns for high efficiency, high average torque and a lower torque ripple. The change of current falling time as a variation of turn-off angle was shown by FEA. The iron loss and copper loss were described. The torque of the redesigned motor is suitable for low and high speed ranges to drive a HEV that was verified by the speed-torque curve.

• Journal of KIISE:Databases
• /
• v.32 no.2
• /
• pp.151-160
• /
• 2005

As web pages are created, destroyed, and updated frequently, web databases should be updated to keep up-to-date web pages. In order to keep web databases fresh effectively, we need to understand the change of real web pages. Previous researches on the change of the web pages have directed their efforts on the contents modification of web pages only, and have not taken into account the factors of creation and destruction of web pages In their research. This paper investigates the web page changes, which include contents modification, page creation, and page destruction. We introduce three metrics, namely DR (Download Rate), MR (Modification Rate), and CAV (Coefficient of Age Variation) to represent the change of the web pages. We have monitored three million web pages collected from the famous and random sites every other day for one hundred days. With the Download Rate and the Modification Rate, we learned that the download success and the modification depends on the past change of them, and proposes two estimation formulae that predict the download success and modification. With the Coefficient of Age Variation, we show how web pages do not change periodically.

• Transactions of Materials Processing
• /
• v.21 no.2
• /
• pp.89-95
• /
• 2012

To examine the deformation characteristics of round aluminum pipe under biaxial compression, a horizontal biaxial compression die was fabricated. The change of material properties, punch load and deformation behavior were monitored in experiments using various compressive deformation rates in the range of 1mm/min.~400mm/min. The tensile and compressive strains were estimated from Vickers microhardness results. The punch load and deformation characteristic of the round aluminum pipes were found to change greatly at a deformation rate of about 200mm/min. The punch load decreased with increasing compressive deformation rate. Results of numerical simulation using Deform-2D were in good agreement with experimental results, and the measured hardness variation with the strain variation was predicted well by the simulation.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.11a
• /
• pp.11-12
• /
• 2011

The Construction Standard Production Unit(CSPU) has been used for the standard cost estimate in public and private construction projects. However, It is difficult to reflect the various site attributed variation in productivity using existing CSPU. The reason is that a criteria which site should be selection for enactment and/or revision of CSPU is not established. This study aims to provide essential data to be used for analyzing the labor factors in a way to secure efficiency and reliability of CSPU.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.45 no.4
• /
• pp.511-516
• /
• 1996

In this paper, weekly maximum power demand forecasting method in consideration of temperature estimation using a time series model was presented. The method removing weekly, seasonal variations on the load and irregularities variation due to unknown factor was presented. The forecasting model that represent the relations between load and temperature which get a numeral expected temperature based on the past 30 years(1961~1990) temperature was constructed. Effect of holiday was removed by using a weekday change ratio, and irregularities variation was removed by using an autoregressive model. The results of load forecasting show the ability of the method in forecasting with good accuracy without suffering from the effect of seasons and holidays. Percentage error load forecasting of all seasons except summer was obtained below 2 percentage. (author). refs., figs., tabs.

• International journal of advanced smart convergence
• /
• v.11 no.3
• /
• pp.64-71
• /
• 2022

Various types of attendance management systems are being introduced in a remote working environment and research on using face recognition is in progress. To ensure accurate worker's attendance, a face recognition-based attendance management system must analyze every frame of video, but face recognition is a heavy task, the number of the task should be minimized without affecting accuracy. In this paper, we proposed a search model using time interval variation to minimize the number of face recognition task of recorded videos for attendance management system. The proposed model performs face recognition by changing the interval of the frame identification time when there is no change in the attendance status for a certain period. When a change in the face recognition status occurs, it moves in the reverse direction and performs frame checks to more accurate attendance time checking. The implementation of proposed model performed at least 4.5 times faster than all frame identification and showed at least 97% accuracy.

• Journal of Environmental Impact Assessment
• /
• v.14 no.3
• /
• pp.135-145
• /
• 2005

This study was conducted to investigate the characteristics of meteorological environment variation before and after construction of Nak-dong river estuary barrage. We used meteorological data(air temperature, precipitation, relative humidity, visibility, wind) at Gimhae airport meteorological station. The construction of river estuary barrage can change climate at the neighboring districts and influence human's health and vegetable. The construction of Nakdong river estuary barrage brought rise of temperature, decrease of relative humidity and increase of poor visibility frequency.

• Journal of Korean Society on Water Environment
• /
• v.29 no.2
• /
• pp.155-164
• /
• 2013

To confirm the relationship between climate change and Stephanodiscus in Mulgeum station of Nakdong River, Korea, this study was conducted. The temperature in crease by climate change was observed in the study site, where the temperature was gradually increased in most seasons, except for summer season. The mass proliferation of Stephanodiscus constantly appeared in every year, especially between November and March, and when Stephanodiscus abundance was above 90% in phytoplankton biomass. Among this period, phytoplankton biomass was high related with water temperature ($r^2$=0.249, P<0.01) than nutrient factors such as nitrogen and phosphorus in the study site. Finally, temperature by climate change can be regarded as the affecting factor for chl. a variation, because temperature was strongly related with water temperature ($r^2$=0.748, P<0.01). From 1997 to 2010, the annual maximum phytoplankton biomass was recorded in the range of temperature from $4.8^{\circ}C$ to $8.4^{\circ}C$, and the range was regarded as the temperature condition for the optimal growth of Stephanodiscus in the study site. On the optimal growth temperature, the trend of monthly average temperature corresponded to the trend of chl. a variation from November to March. In future, the increase of temperature by climate change can prolong Stephanodiscus blooming period in winter and spring seasons.