• Journal of Sensor Science and Technology
• /
• v.22 no.1
• /
• pp.84-88
• /
• 2013

In this paper, the low price signal generator with capability of frequency high-resolution and variable sync pulse has implemented. It fulfils well the requirements for SS-OCT of the frequency resolution less than 1Hz, frequency stability of ${\leq}{\pm}0.5Hz$/10 min and variable sync pulse output timing. Through its performance test applied to wavelength swept laser, 120 nm sweeping range and 10 mW average optical power were obtained. This shows that the realized sine-wave generator can replace the commercial high cost and high performance signal generators employed by current SS-OCT systems.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2002.11a
• /
• pp.303-306
• /
• 2002

This paper presents a novel method for measuring the ground impedance in grounding systems. A square wave current was injected to the main grounding grid through auxiliary electrode, and the test current and ground potential rise(GPR) were measured using the band-pass filter. Ground impedance was calculated from the sinusoidal waveforms of the test current and GPR in frequency range of 20~2100Hz. Also the resistance and reactance component of ground impedance were analyzed.

• East Asian Journal of Business Economics (EAJBE)
• /
• v.8 no.3
• /
• pp.25-36
• /
• 2020

Purpose - As the interest of financial aria increase in economic change and labor market change, this study focused on the employee of the financial aria in Korea. The purpose of this study is to analyses relation among relationship variable and organizational culture variable and organizational effectiveness of financial aria employees in Korea. Research design, data, and methodology - This study measured relationship variable with communication and trust. And measured organizational culture variable with innovation, relation, hierarchy and rational. And measured organizational effectiveness with job satisfaction and organizational commitment. Empirical analysis is conducted using 442 financial aria employees of 7th HCCP in KRIVET. And SPSS is used in frequency and stepwise regression test and AMOS is used in path analysis with group differentiation test. Results - Overall results show that trust and relation culture give positive influence on job satisfaction. Organizational commitment results show that relation culture and rational culture give positive influence and also job satisfaction. However, hierarchy culture gives negative influence on organizational commitment. Also, the moderating effect of work characteristics is significant. Conclusions -Result of this study give managerial implication to HRM and also expend inflected organizational culture study to financial aria in Korea. Especially gives insight to relationship, organizational culture and organizational effectiveness. And management differentiation needs between work characteristic.

• Journal of Sensor Science and Technology
• /
• v.24 no.6
• /
• pp.398-403
• /
• 2015

In this paper, the sine-wave and trigger pulse generator with capability of frequency high-resolution and time-variable trigger edge has implemented. It fulfills well the requirements for SS-OCT with frequency resolution of 1 Hz, frequency stability of ${\leq}{\pm}0.03Hz$ and time-variable trigger edge. Through its performance test applied to the wavelength swept laser, 90 nm, sweeping range and 10mW average optical power were obtained. This showes that the realized generator can replace the commercial high cost and high performance signal generators employed by current SS-OCT systems.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.16 no.3
• /
• pp.258-265
• /
• 2011

This paper presents a variable frequency current control scheme for the air-pressure control of diaphragm. Differ from the conventional air-pressure control of diaphragm, the proposed method uses a single-phase inverter to control the phase current and frequency. The phase current is adjusted to keep the reference air-pressure of the diaphragm. And the current frequency is changed to reduce the mechanical vibration. In order to smooth change of the operation with a constant air-pressure, the frequency is changed according to the voltage reference from the current controller. When the phase current is satisfied to the constant air-pressure, the current frequency is increased to reduce the vibration of the diaphragm. When the reference voltage to keep the phase current is over than the set value, the current frequency is decreased to keep the air-pressure. The proposed control scheme is verified by the experimental test of a commercial diaphragm.

• The Research Journal of the Costume Culture
• /
• v.21 no.6
• /
• pp.827-843
• /
• 2013

The purpose of this study is to identify the antecedents of the attitudes toward purchasing fast fashion brands and the frequency of purchasing fast fashion brands. As antecedents, a few brand-related variables and a consumer-related variable were considered. Perceived perishability, perceived scarcity, perceived quality, and perceived low price were included as brand-related variables and congruity between self image and fast fashion brand image was included as a consumer-related variable. It was hypothesized that both brand-related and consumer-related variables directly influence the attitudes toward purchasing fast fashion brands and then influence the frequency of purchasing fast fashion brands. Data were gathered by surveying university students in Seoul, using convenience sampling. Two hundred twenty seven questionnaires were used in the statistical analysis, exploratory factor analysis using SPSS and confirmatory factor analysis and path analysis using AMOS. The results showed that all the fit indices for the variable measures were quite acceptable. In addition, the overall fits of the model suggest that the model fits the data well. The hypothesized relationship test proved that perceived perishability, perceived quality, and congruity between self image and fast fashion brand image influence the attitudes toward purchasing fast fashion brands and then influence the frequency of purchasing fast fashion brands. The results suggest some effective marketing strategies for marketers in the fast fashion industry.

• Journal of Power Electronics
• /
• v.11 no.1
• /
• pp.82-89
• /
• 2011

Differences in the frequency characteristic applied to a ripple current may shorten fuel cell life span and worsen the fuel efficiency. Therefore, this paper presents an experimental analysis of the ripple current applied variable frequency characteristic in a polymer electrolyte membrane fuel cell (PEMFC). This paper provides the first attempt to examine the impact of ripple current through immediate measurements on a single cell test. After cycling for hours at three frequencies, each polarization and impedance curve is obtained and compared with those of a fuel cell. Through experimental results, it can be absolutely concluded that low frequency ripple current leads to long-term degradation of a fuel cell. Three different PEMFC failures such as membrane dehydration, flooding and carbon monoxide (CO) poisoning that lead to an increase in the impedance magnitude at low frequencies are simply introduced.

• Journal of Korean Society of Transportation
• /
• v.27 no.6
• /
• pp.147-156
• /
• 2009

We present a methodology for modeling and solving the transit frequency design problem with variable demand. The problem is described as a bi-level model based on a non-cooperative Stackelberg game. The upper-level operator problem is formulated as a non-linear optimization model to minimize net cost, which includes operating cost, travel cost and revenue, with fleet size and frequency constraints. The lower-level user problem is formulated as a capacity-constrained stochastic user equilibrium assignment model with variable demand, considering transfer delay between transit lines. An efficient algorithm is also presented for solving the proposed model. The upper-level model is solved by a gradient projection method, and the lower-level model is solved by an existing iterative balancing method. An application of the proposed model and algorithm is presented using a small test network. The results of this application show that the proposed algorithm converges well to an optimal point. The methodology of this study is expected to contribute to form a theoretical basis for diagnosing the problems of current transit systems and for improving its operational efficiency to increase the demand as well as the level of service.

• English Language & Literature Teaching
• /
• v.18 no.1
• /
• pp.171-195
• /
• 2012

While noticing that there is insufficient interest in the assessment of EFL learners' vocabulary levels or sizes, the researchers developed two tests identical in form (Forms A and B) to assess the lexical knowledge of Korean university learners at the $1^{st}{\sim}10^{th}$ 1,000 word bands by adapting a pre-established vocabulary levels test (VLT). Of equal concern was to investigate if the VLT was equally a valid and reliable instrument to be used on measuring the lexical knowledge of EFL learners. The participants were 804 university freshmen enrolled in a General Education English Course from four different colleges. The learners were asked to respond to either Form A or B. While scores generally fell towards the lower frequency bands, multiple regression found the Korean College Scholastic Ability Test (CSAT) to be a significant variable for predicting the learners' vocabulary sizes. From a methodological perspective, however, noticeable differences between Forms A and B could be found with item response theory analysis. The findings of the study provide suggestions on how future VLT for testing EFL learners may have to be redesigned.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.826-831
• /
• 2002

In order to investigate the dynamic characteristics of real structure, many dynamic engineer had been interested in modal test however it is not easy to perform dynamic test of large structure because of many difficulties such as unsatisfied excitation force in global mode frequency range, measurement of dynamic force and so on. Therefore. new type vibration exciter with variable stiffness support system and dynamic force was developed to provide a improved experimental environment for a large and complex structure. The developed exciter improved from two viewpoint, dynamic performance and utility convenience. its characteristics was shown in this paper.