• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.6
• /
• pp.770-777
• /
• 2015

Recently, due to the rapid development of Power Electronics, the usage of Non Linear Load variable frequency drivers (VFDs) is increasing in the electric propulsion vessels and offshore plants. And harmonics which is generated by the variable frequency drives is an important issue should be solved. Ac line reactors and dc link reactors are widely used in variable frequency drives to improve the drive performance such as reducing input current harmonics, elevating input power factor, and protecting the drives from surges, etc. The effectiveness of both types of reactors in reducing input harmonics is affected by the loading of the drives and the system source impedance. And it considered that inductance of DC link reactors should be about 1.7 times of AC line reactors for same effect. The rules to evaluate the needs and effectiveness using ac line or dc link reactors are proposed for practical appications. In this paper, a simulation is performed to investigate of such factors using software PSIM.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.233-233
• /
• 2000

Direct torque control (DTC) scheme provides a very quick torque response without the complex field-orientation block and inner current regulation loop. DTC is known as an appropriate scheme for high power induction motet drives because it can be used at lower switching frequency. There are two major drawbacks with the application of DTC schemes : one is large current harmonics due to flux drooping in a low speed range, the other is that the inverter switching frequency is varying according to motor parameters and operating speed. Switching devices in the power electronics drives should be supported for relatively high switching frequency. In this paper, a P-type fuzzy controller to realize the variable switching sector scheme and a PID-type fuzzy switching frequency regulator are adopted. A meaningful contribution of this paper is to propose a simple realization scheme of the fuzzy switching frequency regulator. Simulation results show the effectiveness of those propositions.

• Proceedings of the KIEE Conference
• /
• 1998.07f
• /
• pp.1947-1950
• /
• 1998

GTO inverter used for traction motor drives includes harmonics in the output current and torque by the limitation of switching frequency. However, the hybrid PWM method, using SPWM in low frequency range and SHE PWM in upper frequency range, can be obtained the relative less harmonic characteristic. The transient reaction, which the magnetic flux and the torque is altered and instantly the large current is flowed, may be produced at the mode change. This paper presents the techniques which can reduce the transient reactions produced in the gear changing of inverter fed traction motor drives operating in the hybrid PWM. The results are verified by the simulations.

• Proceedings of the KIEE Conference
• /
• 1990.07a
• /
• pp.376-379
• /
• 1990

This parer presents a cycloconverter with a LC resonant circuit for a induction motor drive. The cycloconverter can provide variable voltage and frequency three phase output while keeping the input displacement factor at 1.0. The input current wave for is are sinusoidal,and the wide output frequency range is appropriate for variable speed AC motor drives.

• Proceedings of the KIPE Conference
• /
• 2001.12a
• /
• pp.11-14
• /
• 2001

Direct torque control (DTC) scheme provides a very quick torque response without the complex field-orientation block and inner current regulation loop. DTC is known as an appropriate scheme for high power induction motor drives because it can be used at lower switching frequency There are a major drawbacks with the application of DTC schemes it is large current harmonics due to flux drooping in a low speed range. In order to solve the problem, the fuzzy variable switching sector scheme are adopted in this paper. A meaningful contribution of this paper is to propose a simple realization scheme of the fuzzy variable switching sector technique. Experimental results show the effectiveness of this proposition.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.6
• /
• pp.879-885
• /
• 1990

The geometrical algorithm for generating a 3-phase SPWM signal for VVVF (Variable Voltage, Variable Frequency) inverter drives is proposed. In this techniques, it is suitable for micro-processor based implementation since the pulsewiths are computable in real time from simple analytic expressions. System hardware consists of the inverter circuit and the 3-phase SPWM signal generating circuit. The inverter circuit is a 3-phase SPWM signal generating circuit is single board micro-processor consisting of Z-80A CPU, EPROMXI, CTC, PIO. The method of controlling VVVF at the inverter output is discussed here.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 1990.10a
• /
• pp.47-52
• /
• 1990

This paper presents a cyclocoverter with a LC resonant circuit for a induction motor dr-ive. The cycloconverter can provide variab-le voltage and frequency three phase output while keeping the input displacement factor at 1.0. The input current wave forms are sinusoidal, and the wide output frequency ran-ge is appropriate for variable speed AC motor drives.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.36 no.8
• /
• pp.539-546
• /
• 1987

In case of operating at Variable speed the induction motor by a frequency transformer, it will cause ripples in motor torque and considerably bad effects on the machines because the output side of the frequency transformer involves a great number of harmonics. This paper Presents the methods of decreasing torque ripples in induction motor and of improving current waveform, by means of forming the waveforms of output current into multi-step waveforms similiar to sinusoid, and also by means of eliminating the harmonic components maximally, in case of operating a 18-phase multi-inverter combining 3-step current source inverter.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.15 no.2
• /
• pp.135-142
• /
• 2005

This paper presents an adaptive repetitive control scheme for optical disk drives to track a variable periodic reference signal. Periodic disturbances can be adequately attenuated using the concept of repetitive control, provided the period is known. Because optical disk drives support various speeds, they have the varying periodic disturbances. Based on repetitive control to change sampling frequency to follow the change of reference period, an adaptive repetitive control is proposed in order to deal with such disturbances. The proposed control consists of the repetitive controller and the frequency generator. The former uses a varying sampler operating at fixed multiple times of the disturbance frequency and the latter generates the changeable sampling frequency based on the disturbance frequency. The experimental results on the control of an optical disk drive demonstrate the effectiveness of the proposed schemes and the improvement of random access time as well.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.48 no.11
• /
• pp.646-654
• /
• 1999

This paper deals with PWM patterns for harmonic reduction in inverter fed traction motors and the gear changing techniques for the variable speed drive of traction motor. GTOs are used as switching device of inverter because traction motor is a large load. To derive PWM rattern which can minimize the harmonics with the limited switching frequency, the output current and torque characteristic of SPWM and SHE PWM was analyzed. GTO inverter used for traction motor drive includes harmonics in the output current and torque by the limitation of switching frequency. However, the hybrid PWM method that adopt SPWM in the range of low frequency and SHE PWM in upper frequency range can achieve less harmonic characteristics in GTO inverters. If the traction motor is driven in variable speed by the proposed PWM pattern, 7 times of gear changing is needed. At the instant of the mode change, magnetic flux and torque may be altered and the large current flow. To reduce such an undesirable transient behavior, it is also presented the technique for the gear changing of inverter fed traction motor drive operated with the hybrid PWM. The results are verified by simulations and experiments.