• 비파괴검사학회지
• /
• 제23권1호
• /
• pp.1-6
• /
• 2003

배관 내의 스케일은 통수비를 감소시키므로 배관을 적절히 관리하기 위해서는 스케일량에 대한 정량적인 평가가 필수적이다. 상수도 급수관내의 스케일량을 평가하기 위해서 유도초음파를 사용하였다. 가변각 ??지를 사용하여 유도 초음파의 여러 모드를 발생시키고, 노후 배관을 따라서 전파하는 특성을 분석하였다. 실험적으로 관내의 스케일이 증가함에 따라서 $f{\times}d=1.5MHz\;mm$인 경우에 F(M,2) 모드들의 진폭이 크게 감소하는 것을 알 수 있었다. 본 연구의 결과로 상수도 급수관의 스케일량 평가에 적합한 유도 초음파는 F(M,2) 모드들임을 알 수 있었다.

• 한국지열·수열에너지학회논문집
• /
• 제2권1호
• /
• pp.1-7
• /
• 2006

This paper was studied for optimum design of the used vaporizer at a satellite station. Generally, the cold air is created by temperature drop on the vaporizer surface. In addition, the frost creates ice deposit layer, therefore, heat transfer on vaporizer decreases into the adiabatic condition. By this reason, recent vaporizer system is installed as parallel type, and it takes three times of vaporizer capacity. But this vaporizer system requires much installation costs and restricted by some space. It is very important to solve this problem. This study paper is regarding $LN_2$ vaporizer where the utilization increases recently. There are three variable conditions which are used in this study research. First, fin lengths of 4000mm, 6000mm, 8000mm and 0, 4, 8 fin types were applied rut each vaporizer. Second, we applied four season condition which consist of humidity, temperature and air velocity to the experimental environment. Finally, pressure was applied to get flow rate during experiment. This paper objective is to propose vaporizer type and length data for best performance of vaporizer through experiment.

• 대한기계학회논문집B
• /
• 제20권12호
• /
• pp.4013-4026
• /
• 1996

A numerical simulation has been carried out for the jet impinging on a flat plate and a semi-circular concave surface. In this computation finite volume method was employed to solve the full Navier-Stokes equation based on a non-orthogonal coordinate with non staggered variable arrangement. The standard k-.epsilon. turbulent model and low Reynolds number k-.epsilon. model(Launder-Sharmar model) with Yap's correction were adapted. The accuracy of the numerical calculations were compared with various experimental data reported in the literature and showed good predictions of centerline velocity decay, wall pressure distribution and skin friction. For the jet impingement on a semi-circular concave surface, potential core length was calculated for two different nozzle(round edged nozzle and rectangular edged nozzle) to consider effects of the nozzle shape. The result showed that round edged nozzle had longer potential core length than rectangular edged nozzle for the same condition. Heat transfer rate along the concave surface with constant heat flux was calculated for various nozzle exit to surface distance(H/B) in the condition of same jet velocity. The maximum local Nusselt number at the stagnation point occurred at H/B = 8 where the centerline turbulent intensity had maximum value. The predicted Nusselt number showed good agreement with the experimental data at the stagnation point. However heat transfer predictions along the downstream were underestimated. This results suggest that the improved turbulence modeling is required.

• Architectural research
• /
• 제17권3호
• /
• pp.109-115
• /
• 2015

The dynamic pricing of electricity, where the electricity rate increases in a time zone with a high demand for electricity is typically applied to a building whose power reception capacity is greater than a certain size. This includes the time of use(TOU) electricity pricing in Korea which can induce the effect of reducing the power demand of a building. Meanwhile, a VRF (Variable Refrigerant Flow) system that uses electricity is regarded as one of the typical heating and cooling systems along with central air conditioning (central HVAC) for its easy operation and application to the building. Thus, to reduce power energy and operating costs of a building in which the TOU and VRF systems are applied simultaneously, we suggested a control for changing the indoor temperature setting within the thermal comfort range or limiting the rotational speed of an inverter compressor. In this study, to describe the features of the above-mentioned control and verify its effects, we evaluated the results obtained from the analysis of its operation data. Through the actual measurements in winter operations for 73 days since mid- December 2014, we confirmed a reduction of 10.9% in power energy consumption and 12.2% in operating costs by the new control. Also, a reduction of 13.3% in power energy consumption was identified through a regression analysis.

• 한국항공우주학회지
• /
• 제44권3호
• /
• pp.247-255
• /
• 2016

본 논문에서는 핀틀 추력기의 비정상상태 특성을 파악하기 위하여 구동기의 속도를 측정하였으며, 정상상태 실험을 통해 비정상상태 실험 시스템을 구성하였다. 비정상상태 실험은 총 3 가지의 구동 속도(3.01 mm/s, 5.65 mm/s, 10.83 mm/s)를 이용하여 진행하였다. 그 결과 핀틀이 후진하는 경우가 전진하는 경우보다 더 빨리 명령 압력 값에 수렴하였으며, 이는 핀틀이 후진하는 경우가 연소실의 압력이 높은 상태로 형성되어 있기 때문이다. 핀틀이 전 후진하는 경우에 추력 곡선에 특이점들이 나타났으며, 이는 연소실 압력과 노즐 목 면적 변화에 기인하여 나타난 질유량 변화로 인한 것이다. 구동 속도가 빠를수록 이러한 현상이 뚜렷하게 나타났다.

• 한국수자원학회논문집
• /
• 제37권6호
• /
• pp.499-507
• /
• 2004

본 연구에서는 준 분포형 지표수 유출모형인 SWAT과 3차원 지하수 유동모형인 MODFLOW의 완전 연동형 결합모형을 독자적인 방식에 따라 개발했다. SWAT의 지하수 모형성분은 집중형이므로 분포형 매개변수와 변화하는 양수량, 지하수위의 변화 등을 고려하지 못하며 MODFLOW 모형은 주요 입력자료인 함양량의 정확한 산정이 어렵다는 한계를 안고 있다. 이를 극복하기 위해 준분포형 모형인 SWAT의 HRU를 분포형 모형인 MODFLOW의 격자로 대응시키기 위해 DEM을 이용한 HRU-GRID변환기법을 독자적으로 개발하였으며, 수문성분 교환은 지하수 함양량의 전달과정과 하천네트워크-대수층간의 상호작용을 고려하여 완성하였다 결합모형을 이용하면 지표수나 지하수 모형만으로는 해결되지 않는 하천-대수층간의 경계유량을 고려한 유출해석이 가능해짐으로써 지하수 유출량을 포함한 유역내 총 유출량의 신뢰성이 증대될 것으로 기대된다.

• 한국자동차공학회논문집
• /
• 제16권5호
• /
• pp.37-43
• /
• 2008

The durability test of turbo-blower for PEM fuel cell is very important process of BOP development. It is a major barrier to the commercialization of these systems for stationary and transportation power applications. Commercial viability depends on improving the durability of the air supply system to increase the reliability and to reduce the lifetime cost. In this study, turbo-blower supported by oil-free bearing is introduced as the air supply system used by 80kW proton exchange membrane fuel systems. The turbo-blower is a turbo machine which operates at high speed, so air foil bearings suit their purpose as bearing elements. The impeller of blower was adopted mixed type of centrifugal and axial. So, it has several advantages for variable operating condition. The turbo-blower test results show maximum parasitic power levels below 1.67kW with the 30,000 rpm rotating speed, the flow rate of air has maximum 163SCFM(@PR1.1). For proper application of FCV, these have to durability test. This paper describes the experiment for confirming endurance and stability of the turbo-blower for 500 hours.

• 한국태양에너지학회 논문집
• /
• 제27권4호
• /
• pp.167-173
• /
• 2007

This study analyzed by simulation using TRNSYS as well as by experiment on the solar district heating system installed for the first time for the district heating system in Bundang. Simulation analysis using TRNSYS focused on the thermal behavior and long-term thermal efficiency of solar system. Experiment carried out for the reliability of simulation system. This solar system where the circuits of two different collectors, flat plate and vacuum tube collector, are connected in series by a collector heat exchanger, and the collection characteristics of each circuit varies. Therefore, these differences must be considered for the system's control. This system uses variable flow rate control in order to obtain always setting temperature of hot water by solar system. Specifically, this is a system that heats returning district heating water (DHW) at approximately $60^{\circ}C$ using a solar collector without a storage tank, up to the setting temperature of approximately $85{\sim}95^{\circ}C$ To realize this, a flat plate collector and a vacuum tube collector are used as separate collector loops. The first heating is performed by a flat plate collector loop and the second by a vacuum tube collector loop. In a gross collector area basis, the mean system efficiency, for 4 years, of a flat plate collector is 33.4% and a vacuum tube collector is 41.2%. The yearly total collection energy is 2,342GJ and really collection energy per unit area ($m^2$) is 1.92GJ and 2.37GJ respectively for the flat plate vacuum tube collector. This result is very important on the share of each collector area in this type of solar district heating system.

• Journal of Oral Medicine and Pain
• /
• 제37권2호
• /
• pp.107-112
• /
• 2012

하악 및 구강주위근육의 조절되지 않는 움직임으로 정의 되는 구강안면운동장애(orofacial movement disorder, OMD)는 노인층에서 많이 발생하며 그 원인이 아직 정확히 밝혀지지 않고 치료방법 또한 다양하다. 임상적 특징을 분석하고 치료방법을 연구한 자료는 많이 있으나 타액분비와 OMD의 상관관계에 대한 구체적인 연구는 아직 없다. 본 연구에서는 부산대학교치과병원 구강내과에 내원한 OMD 환자 중 구강건조감을 호소한 4명의 환자를 증례로 하여 필로카핀(pilocarpine)을 경구로 투여한 후 OMD 증상의 변화를 관찰하였다. 연구결과 타액분비량의 저하를 보여 구강건조증으로 진단된 증례와 정상타액분비량을 보이는 증례 모두에서 필로카핀의 경구투여 후 OMD증상의 개선을 보였다. 따라서 향후 OMD와 구강건조증의 상관관계에 대한 추가적인 연구가 필요할 것으로 사료된다.

• 한국전기전자재료학회논문지
• /
• 제26권11호
• /
• pp.816-820
• /
• 2013

We investigated the characteristics of the silicon oxy-nitride and nitride films grown by plasma-enhanced chemical vapor deposition (PECVD) at the low temperature with a varying $NH_3/N_2O$ mixing ratio and a fixed $SiH_4$ flow rate. The deposition temperature was held at $150^{\circ}C$ which was the temperature compatible with the plastic substrate. The composition and bonding structure of the nitride films were investigated using Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS). Nitrogen richness was confirmed with increasing optical band gap and increasing dielectric constant with the higher $NH_3$ fraction. The leakage current density of the nitride films with a high NH3 fraction decreased from $8{\times}10^{-9}$ to $9{\times}10^{-11}(A/cm^2$ at 1.5 MV/cm). This results showed that the films had improved electrical properties and could be acceptable as a gate insulator for thin film transistors by deposited with variable $NH_3/N_2O$ mixing ratio.