• 제목/요약/키워드: Variable and Sensitive Loads

검색결과 5건 처리시간 0.02초

가변 감쇠를 이용한 충격제어기법의 성능분석 (Performance Investigation of Variable Damping Shock Attenuation Logic)

  • 오현웅
    • 항공우주시스템공학회지
    • /
    • 제7권1호
    • /
    • pp.1-7
    • /
    • 2013
  • Launch vehicles cause several shock events during their lift-off. The excessive shock loads in the several thousands of g's level can results in permanent damage to electronics, optics and other sensitive payload components. The shock can be attenuated by mounting a shock absorber. In this paper, we proposed a semi-active control logic to attenuate the shock so that the input acceleration to main instruments does not exceed the allowable maximum acceleration value. For the performance investigation, two elements model of variable damping and spring stiffness has been used and the analysis results indicate that the proposed semi-active control logic attenuates shock level better than an optimal passive and conventional semi-active on-off control system.

Line-Interactive 전압보상기에 관한 연구 (A Study of Line-Interactive UPS with Voltage Compensator)

  • 우성민;강대욱;이우철;최창호;현동석
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2001년도 전력전자학술대회 논문집
    • /
    • pp.487-490
    • /
    • 2001
  • Power Quality and Reliability are becoming important issues for critical and sensitive loads. This paper describes the Line Interactive UPS with the function of Voltage Compensator that is 'Line interactive Dynamic Voltage Restorer(LIDVR). The main purpose of a LIDVR is to compensate for voltage sag(dip), outage and overvoltage. The overall system consists of three controller 1) current controller with prediction 2) voltage controller and 3) proposed variable DC LINK controller. The variable DC LINK control technique using the LIDVR protects DC LINK from overflowing the input current. The simulation results are depicted in this paper to show the effect of this proposed system.

  • PDF

가변 및 민감성 부하를 고려한 대단위 가상 발전소 운영 방법 (Large-scale Virtual Power Plant Management Method Considering Variable and Sensitive Loads)

  • 박용국;이민구;정경권;이용구
    • 전자공학회논문지
    • /
    • 제52권5호
    • /
    • pp.225-234
    • /
    • 2015
  • 가상발전소(Virtual Power Plant)는 비상발전(DG), 열병합발전(CHP), 에너지 저장 장치(ESS), 부하(Load)등과 같은 분산 에너지 자원을 ICT기반의 기술로 연계하여 하나의 단일 발전소와 같이 운영하는 기술이다. 지금까지의 가상발전소는 하나의 가상발전 플랫폼을 통하여 광범위하게 산재해 있는 다양한 분산 에너지 자원을 네트워크로 연결하는 구조를 기반으로 개발되고 실증되었다. 그러나 분산 에너지 자원 종류 및 수가 지속적으로 증가할 경우 이러한 분산 에너지 자원과 관련된 데이터 또한 기하급수적으로 증가할 수밖에 없으며 분산 에너지 자원의 분포가 광범위한 지역에 분포되어 있는 경우 하나의 가상발전 플랫폼으로 이들 모든 자원에 대한 네트워크를 중앙 집중형으로 가져가는 것은 네트워크 구성을 위한 기술적, 비용적 측면에서 매우 비효율적이다. 따라서 본 논문에서는 광범위한 지역에 분포되어 있는 분산 에너지 자원을 효율적으로 관리함으로써 시스템 부하에 따른 오류 확률을 낮추고, 분산 에너지 자원과의 데이터 교환의 견고성과 가상발전소의 확장성을 확보할 수 있는 대단위 가상 발전소 구성 방법을 제안한다. 또한 대단위 가상 발전소 구성 시 분산 에너지 자원을 직접적으로 제어하고 모니터링하는 소단위 가상발전 플랫폼에서 가변 및 민감성 부하를 고려한 최적의 자원 스케줄링 방법 또한 시뮬레이션을 통해 그 결과의 유효성을 검증한다.

철근 콘크리트 플랫 플레이트 처짐의 변동성 평가 (Variability of Deflections for Reinforced Concrete Flat Plate)

  • 김민숙;조은선;이영학
    • 한국전산구조공학회논문집
    • /
    • 제27권6호
    • /
    • pp.543-549
    • /
    • 2014
  • 불확실성을 가지는 콘크리트의 특성으로 인해 철근 콘크리트 부재의 처짐에는 높은 변동성이 발생할 수 있다. 그러나 현행 설계규준은 이를 고려하지 않고 경험적인 데이터에 바탕을 두고 있으며, 부재의 최소 두께 또는 최대 허용 처짐만을 제시하고 있다. 본 논문에서는 철근 콘크리트 플랫 플레이트의 처짐 예측이 가능한 유한요소해석 모델에 확률해석 모델을 적용하여 철근 콘크리트 플랫 플레이트 처짐의 변동성을 평가하고자 하였다. 이를 위해 콘크리트, 철근, 부재치수, 인장강성에 관련된 8개 요소를 변수로 한 몬테카를로 시뮬레이션을 수행하였다. 해석결과, 스팬의 크기가 증가할수록 하중으로 인한 처짐에 더 민감하게 반응하는 것으로 나타났으며, 재하되는 활하중의 크기가 클수록, 슬래브의 두께가 작을수록 처짐의 변동성이 큰 것으로 나타났다.

도전율 및 유전율이 다른 병소의 검출을 위한 320-채널 다주파수 Trans-Admittance Scanner(TAS) (320-Channel Multi-Frequency Trans-Admittance Scanner(TAS) for Anomaly Detection)

  • 오동인;이민형;김희진;우응제
    • 대한의용생체공학회:의공학회지
    • /
    • 제28권1호
    • /
    • pp.84-94
    • /
    • 2007
  • In order to collect information on local distribution of conductivity and permittivity underneath a scan probe, we developed a multi-frequency trans-admittance scanner (TAS). Applying a sinusoidal voltage with variable frequency on a chosen distal part of a human body, we measure exit currents from 320 grounded electrodes placed on a chosen surface of the subject. The electrodes are packaged inside a small and light scan probe. The system includes one voltage source and 17 digital ammeters. Front-end of each ammeter is a current-to-voltage converter with virtual grounding of a chosen electrode. The rest of the ammeter is a voltmeter performing digital phase-sensitive demodulation. Using resistor loads, we calibrate the system including the scan probe to compensate frequency-dependent variability of current measurements and also inter-channel variability among multiple. We found that SNR of each ammeter is about 85dB and the minimal measurable current is 5nA. Using saline phantoms with objects made from TX-151, we verified the performance of the lesion estimation algorithm. The error rate of the depth estimation was about 19.7%. For the size estimate, the error rate was about 15.3%. The results suggest improvement in lesion estimation algorithm based on multi-frequency trans-admittance data.