• 대한원격탐사학회지
• /
• 제39권3호
• /
• pp.355-361
• /
• 2023

지구 표면에 대한 정보는 기상 및 대기 역학의 이해나 인간을 포함한 동물에 큰 영향을 미치는 극한 열현상에 대응함에 있어서 핵심적인 지구 물리량이다. 지구 영역에 대한 온도를 추정하기 위하여 위성에 탑재된 열적외 센서가 널리 활용되어 왔는데, 정밀한 활용을 위해서는 온도 추정 과정의 불확도에 대한 이해가 선행되어야 한다. 하지만 온도추정 불확도에 영향을 미치는 많은 요소 중에서 한반도 주변의 환경 하에서의 온도추정 알고리즘의 불확도 산정에 대한 연구는 미미하였다. 본 연구에서는 한반도 주변의 대기 및 해양 조건하에서 범용성이 높은 single-channel 알고리즘의 불확도를 추정하는 연구를 수행하였다. 알고리즘의 입력자료로 필요한 재분석자료(reanalysis)의 영향성을 평가하기 위하여 두 가지의 재분석자료, 즉 fifth generation of European Centre for Medium-Range Weather Forecasts reanalysis of the global climate and weather (ERA5)와 Modern-Era Retrospective analysis for Research and Applications-2 (MERRA-2)를 사용하였고, 복사전달모델은 MODerate resolution atmospheric TRANsmission (MODTRAN)을 사용하였다. MODTRAN 모의와 온도 추정 정확도 검증에 사용되는 현장 관측 수온은 한반도 인근 해역에 위치한 해양 기상 부이(buoy)로부터 획득했다. 실험 결과, 알고리즘 불확도는 대기 수증기량에 따라서 선형에 가깝게 증가하는 것을 확인하였고, 가장 건조한 조건에서는 약 0.35K 그리고 평균적으로 0.45K 가량의 불확도가 발생함을 확인하였다. 이러한 결과는 재분석자료의 종류에 상관없이 유사하게 도출되어 알고리즘이 가지는 순수한 불확도라고 추정할 수 있었다.

• 대한기계학회논문집
• /
• 제16권7호
• /
• pp.1255-1265
• /
• 1992

본 연구에서는 단열 및 온도가 영으로 고정된 경계조건을 갖는 대칭 입술형과 대칭 익형 강체함유 물상의 접합경계면 균열에 대한 Hilbert 문제로부터 복소 포텐셜 함수와 커스프 균열선단 그리고 접합경계면 균열선단에서 TSIF를 구하고자 한다.

• 대한기계학회논문집B
• /
• 제24권12호
• /
• pp.1596-1607
• /
• 2000

The optimal design of auto-catalyst needs a good compromise between the pressure drop and flow uniformity in the substrate. One of the effective methods to achieve this goal is to use the concept of radially variable cell density. But this method has not been examined its usefulness in terms of chemical behavior and conversion performance. In this work, two-dimensional performance prediction of catalyst coupled with turbulent reacting flow simulation has been used to evaluated the benefits of this method n the flow uniformity and conversion efficiency. The results showed that two cell combination of 93cpsc and 62 cpsc was the most effective for improved pressure drop and conversion efficiency due to balanced space velocity and efficient usage of geometric surface area of channels. It was also found that large temperature difference between the bricks in case that the edge of the frontal face of brick has too much lower cell density(less than 67% of cell density of the center of the brick). This study has also demonstrated that the present computational results show the better prediction accuracy in terms of CO, HC and NO conversion efficiencies compared to those of conventional 1-D adiabatic model by comparison with experimental results.

• 대한기계학회논문집B
• /
• 제28권11호
• /
• pp.1302-1314
• /
• 2004

Turbulent heat transfer to $CO_2$ at supercritical pressure flowing in vertical tubes is investigated using direct numerical simulation (DNS). A conservative space-time discretization scheme for variable-density flows at low Mach numbers is adopted in the present study to treat steep variations of fluid properties at supercritical pressure just above the thermodynamic critical point. The fluid properties at these conditions are obtained using PROPATH and used in the form of tables in the simulations. The buoyancy influence induced by strong variation of density across the pseudo-critical temperature proved to play a major role in turbulent heat transfer at supercritical state. Depending on the degree of buoyancy influence, turbulent heat transfer may be enhanced or significantly deteriorated, resulting in local hot spots along the heated surface. Based on the results of the present DNS combined with theoretical considerations, the physical mechanism of this local heat transfer deterioration is elucidated.

• Journal of the Korean Wood Science and Technology
• /
• 제43권5호
• /
• pp.600-612
• /
• 2015

We investigated the optimization of the organosolv pretreatment of yellow poplar for bioethanol production. Response surface methodology was used to determine the optimal conditions of three independent variables (reaction temperature, reaction time, and sulfuric acid (SA) concentration). Reaction temperature is the most significant variable in the degradation of xylan and lignin in the presence of an acid catalyst, and ethanol production increased with a decrease in the lignin content. The highest ethanol concentration ($42.80g/{\ell}$) and theoretical ethanol yield (98.76%) were obtained at $152^{\circ}C$ (2.5 bar) with 1.6% SA for 16 min. However, because of excessive degradation of the raw material, the overall ethanol yield was less than under other pretreatment conditions which has approximately 50% of WIS recovery rate after pretreatment. The optimal conditions for the maximum overall ethanol yield ($146^{\circ}C$ with 1.22% SA for 15.9 min) were determined with a predicted yield of 17.11%, and the experimental values were very close (17.15%). Therefore, the quadratic model is reliable.

• 분석과학
• /
• 제10권6호
• /
• pp.418-426
• /
• 1997

고주파를 이용한 오니의 건조특성에 대하여 살펴보고 재래식 건조특성과 비교 분석하였다. 고주파 건조는 빠른 속도와 높은 효율을 보였다. 재래식 건조에서는 항율건조기간이 나타나지 않았고 수분은 모세관현상에 의하여 이동하였다. 오니의 수분 중 자유수와 결합수는 존재하지 않았다. 고주파 건조에서 감율건조기간이 두 부분으로 나타났으며, 수분의 이동은 확산에 의하여 일어났다. 증발 표면적이 커질수록 수분의 제거가 촉진되었고, 오니의 지름이 커질수록 넓은 범위의 항율건조 기간이 나타났으며, 모양에 따라서도 건조특성이 다르게 나타났다. 고주파 건조에서는 오니의 중심부에서 가장 먼저 온도가 상승하였으며, 항율건조기간에서 $80{\sim}100^{\circ}C$로 일정하게 유지되면서 가장 높았다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 춘계학술대회
• /
• pp.187-191
• /
• 2006

Sputter deposition followed by surface treatment was studied using reactive RF plasma as a method for preparing titanium oxide $(TiO_2)$ films on the FTO $(SnO_2: F)$ substrate for dye-sensitized solar cells (DSCs). Anatase structure $TiO_2$ films deposited by reactive RF magnetron sputtering under the conditions of $Ar/O_2(5%)$ mixtures, RF power of 600W and substrate temperature of $400^{\circ}C$ were surface-treated by inductive coupled plasma (ICP) with $Ar/O_2$ mixtures at substrate temperature of $400^{\circ}C$, and thus the films were applied to the DSCs. We have chosen a solar cell width as a variable of a large-scaled DSCs and confirmed electric characteristics of an individual cell. As a result, the higher the internal resistance of DSC becomes, the wider the width gets. Internal resistance makes it difficult to collect photoelectron generated from dye. Ultimately up sizing DSC causes the increase of internal resistance and then has a bad effect on the cell characteristics.

• 한국환경과학회지
• /
• 제26권12호
• /
• pp.1307-1319
• /
• 2017

In this study, we investigated the impact of different initial data on atmospheric modeling results using the Weather Research and Forecast (WRF) model. Four WRF simulations were conducted with different initialization in March 2015, which showed the highest monthly mean $PM_{10}$ concentration in the recent ten years (2006-2015). The results of WRF simulations using NCEP-FNL and ERA-Interim were compared with observed surface temperature and wind speed data, and the difference of grid nudging effect on WRF simulation between the two data were also analyzed. The FNL simulation showed better accuracy in the simulated temperature and wind speed than the Interim simulation, and the difference was clear in the coastal area. The grid nudging effect on the Interim simulation was larger than that of the FNL simulation. Despite of the higher spatial resolution of ERA-Interim data compared to NCEP-FNL data, the Interim simulation showed slightly worse accuracy than those of the FNL simulation. It was due to uncertainties associated with the Sea Surface Temperature (SST) field in the ERA-Interim data. The results from the Interim simulation with different SST data showed significantly improved accuracy than the standard Interim simulation. It means that the SST field in the ERA-Interim data need to be optimized for the better WRF simulation. In conclusion, although the WRF simulation with ERA-Interim data does not show reasonable accuracy compared to those with NCEP-FNL data, it would be able to be Improved by optimizing the SST variable.

• 한국수산과학회지
• /
• 제44권1호
• /
• pp.31-36
• /
• 2011

This study developed a normal temperature-circulatable retort-sterilized crab analog (RSCA) with a long shelf-life by retort sterilization. We examined the optimum sterilization conditions and quality characteristics of the RSCA. A central composite design for response surface methodology (RSM) was adopted to optimize of the retort sterilization. The central composite design consisted of 11 samples: four factorial points, four star points, and three central points. The sterilization temperature and $F_0$-value for retort sterilization were the independent variables, and the shearing force, whiteness, and sensory score for texture were the dependent variable. The RSM analysis of the multiple response optimization for the RSCA using the Minitap statistical programing gave an $F_0$-value of 3.3 min. at $117.5^{\circ}C$. The RSM analysis also indicated that the sterilization temperature during retort sterilization was the most influential factor, while the $F_0$-value had little effect on the quality of the RSCA. The moisture, pH and volatile basic nitrogen contents of the RSCA product were 73.1%, 7.3 and 17.2 mg/100 g, respectively, and viable cells count was >18 CFU/g. And sensory quality characteristics of this RSCA was similar to those of a commercial crab analog.

• KSBB Journal
• /
• 제28권2호
• /
• pp.65-73
• /
• 2013

This study aimed to investigate the enzymatic hydrolysis of mannitol using Viscozyme$^{(R)}$ L, Celluclast$^{(R)}$ 1.5 L, Saczyme$^{(R)}$, Novozym$^{(R)}$, Fungamyl$^{(R)}$ 800 L, Driselase$^{(R)}$ Basidiomycetes sp., and Alginate Lyase, and to optimize of reaction conditions for production of reducing sugar. Response surface methodology (RSM) based on central composite rotatable design was used to study effects of the independent variables such as enzyme (1-9% v/w), reaction time (10-30 h), pH (3.0-7.0) and reaction temperature ($30-70^{\circ}C$) on production of reducing sugar from mannitol. The coefficient of determination ($R^2$) of $Y_1$ (yield of reducing sugar by Viscozyme$^{(R)}$ L) and $Y_3$ (yield of reducing sugar by Saczyme$^{(R)}$) for the dependent variable regression equation was analyzed as 0.985 and 0.814. And the p-value of $Y_1$ and $Y_3$ showing 0.000 and 0.001 within 1% (p < 0.01), respectively, was very significant. The optimum conditions for production of reducing sugar with Viscozyme$^{(R)}$ L were 9.0 % (v/w) amount of enzyme, 30.0 hours of reaction time, pH 4.5 and $30.0^{\circ}C$ of reaction temperature, and those with Saczyme$^{(R)}$ were 9.0% (v/w) of amount of enzyme dosage, 30.0 h of reaction time, pH 7.0 and $30.0^{\circ}C$ of reaction temperature, consequently, the predicted reducing sugar yields were 22.5 and 27.9 mg/g-mannitol, respectively.