• Water Engineering Research
• /
• 제2권1호
• /
• pp.1-10
• /
• 2001

The frequency analyses for the precipitation data in Korea were performed. We used daily maximum series, monthly maximum series, and annual series. For nonparametric frequency analyses, variable kernel estimators were used. Nonparametric methods do not require assumptions about the underlying populations from which the data are obtained. Therefore, they are better suited for multimodal distributions with the advantage of not requiring a distributional assumption. In order to compare their performance with parametric distributions, we considered several probability density functions. They are Gamma, Gumbel, Log-normal, Log-Pearson type III, Exponential, Generalized logistic, Generalized Pareto, and Wakeby distributions. The variable kernel estimates are comparable and are in the middle of the range of the parametric estimates. The variable kernel estimates show a very small probability in extrapolation beyond the largest observed data in the sample. However, the log-variable kernel estimates remedied these defects with the log-transformed data.

• Structural Engineering and Mechanics
• /
• 제24권3호
• /
• pp.375-393
• /
• 2006

Under high velocity, pulse type near source earthquakes semi-active control systems are very effective in reducing seismic response base isolated structures. Semi-active control systems can be classified as: 1) independently variable stiffness, 2) independently variable damping, and 3) combined variable stiffness and damping systems. Several researchers have studied the effectiveness of independently varying damping systems for seismic response reduction of base isolated structures. In this study effectiveness of a combined system consisting of a semi-active independently variable stiffness (SAIVS) device and a magnetorheological (MR) damper in reducing seismic response of base isolated structures is analytically investigated. The SAIVS device can vary the stiffness, and hence the period, of the isolation system; whereas, the MR damper enhances the energy dissipation characteristics of the isolation system. Two separate control algorithms, i.e., a nonlinear tangential stiffness moving average control algorithm for smooth switching of the SAIVS device and a Lyapunov based control algorithm for damping variation of MR damper, are developed. Single and multi degree of freedom systems consisting of sliding base isolation system and both the SAIVS device and MR damper are considered. Results are presented in the form of nonlinear response spectra, and effectiveness of combined variable stiffness and variable damping system in reducing seismic response of sliding base isolated structures is evaluated. It is shown that the combined variable stiffness and variable damping system leads to significant response reduction over cases with variable stiffness or variable damping systems acting independently, over a broad period range.

• 대한기계학회논문집A
• /
• 제24권10호
• /
• pp.2477-2486
• /
• 2000

A planetary gear assembly is a key component to combine and/or split a power from the source. With a planetary gear assembly, a continuously variable unit extends its capacity by means of power bra nching mechanism. Power branching with one planetary gear assembly and one continuously variable unit is categorized into 12 basic types. Each type represents peculiar power transmitting characteristics. Additionally, a multi-mode (range) continuously variable transmission can be designed with accompanying clutches. A multi-mode continuously variable transmission changes the path through which the source power is transmitted. Each path has its own features, such as high efficiency. In this paper, some design principles are examined such as, criteria to guarantee the minimum power efficiency, and constraints to guarantee the smooth mode shift after discussing well-known features of multi-mode M mathematically.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.484-489
• /
• 2003

The mass flow rate of gas flow through critical nozzle depends on the nozzle supply conditions and the cross-sectional area at the nozzle throat. In order that the critical nozzle can be operated at a wide range of supply conditions, the nozzle throat diameter should be controlled to change the flow passage area. This can be achieved by means of a variable critical nozzle. In the present study, both experimental and computational works are performed to develop variable critical nozzle. A cone-cylinder with a diameter of d is inserted into conventional critical nozzle. It can move both upstream and downstream, thereby changing the cross-sectional area of the nozzle throat. Computational work using the axisymmetric, compressible Navier-Stokes equations is carried out to simulate the variable critical nozzle flow. An experiment is performed to measure the mass flow rate through variable critical nozzle. The present computational results are in close agreement with measured ones. The boundary layer displacement and momentum thickness are given as a function of Reynolds number. An empirical equation is obtained to predict the discharge coefficient of variable critical nozzle.

• 한국산학기술학회논문지
• /
• 제16권12호
• /
• pp.8222-8227
• /
• 2015

가시거리는 볼 수 있는 거리로 정의되며, 이는 글자 크기, 조도 등에 따라 바뀐다. 글자 크기와 조도를 결정할 때 가시거리는 중요한 참고 자료가 될 수 있다. 따라서, 본 논문에서는 가시거리 측정과 예상의 2가지 연구를 하였다. 3가지 글자 크기와 3가지 조도에 대해서 약 120명의 학생에 대해서 가시거리를 측정했다. 측정하지 않은 조도에 대한 가시거리를 예상하기 위해서 독립변수가 조도이고, 종속변수가 가시거리인 함수를 제안하였다. 가시거리는 조도에 대해서 많이 바뀌지 않으므로 분수 함수를 제안하였다. 분수 함수에는 결정해야 할 3개의 변수-k,m,n-가 있다.측정한 가시거리 값들을 근거로 이 3개의 변수의 값들을 정하였다. 3개의 조도에 대해서 가시거리를 측정했으므로 세 개의 k들을 계산할 수 있다. 본 논문에서는 이 3개의 k값들의 분산이 가장 작은 경우를 선택하여 이 경우의 3개의 변수-k,m,n-의 값들을 선택하였다. 3개의 글자 크기에 대해서 각각 다른 3개의 분수 함수를 제안하였다. 제안한 함수와 측정한 자료의 차이가 적으므로 제안한 함수가 정확함을 증명하였다.

• 복합신소재구조학회 논문집
• /
• 제6권3호
• /
• pp.32-40
• /
• 2015

The torque shear high strength bolt is clamped normally at the break of pin-tail specified. However, the clamping forces on slip critical connections do not often meet the required tension, as it considerably fluctuates due to torque coefficient dependent on lubricant affected temperature. In this study, the clamping tests of torque shear bolts were conducted independently at indoor conditions and at construction site conditions. During last six years, temperature of candidated site conditions was recorded from $-11^{\circ}C$ to $34^{\circ}C$. The indoor temperature condition was ranged from $-10^{\circ}C$ to $50^{\circ}C$ at each $10^{\circ}C$ interval. As for site conditions, the clamping force was reached in the range from 159 to 210 kN and the torque value was from 405 to $556 N{\cdot}m$. The range of torque coefficient at indoor conditions was analyzed from 0.126 to 0.158 while tensions were indicated from 179 to 192 kN. The torque coefficient at site conditions was ranged from 0.118 to 0.152. Based on this test, the variable trends of torque coefficient, tension subjected temperature can be taken by statistic regressive analysis. The variable of torque coefficient under the indoor conditions is $0.13%/^{\circ}C$ while it reaches $2.73%/^{\circ}C$ at actual site conditions. When the indoor trends and site conditions is combined, the modified variable of torque coefficient can be expected as $0.2%/^{\circ}C$. and the modified variable of tension can be determined as $0.18%/^{\circ}C$.

• 성인간호학회지
• /
• 제12권1호
• /
• pp.112-121
• /
• 2000

The purpose of this study was to define the degree of the resourcefulness and the health-promoting behavior of cancer patients, to identify the relationship between the resourcefulness and the health promoting behaviors and to provide the basis for strategic nursing intervention. This study was conducted by an exploratory survey. Data were collected by self-reported questionnaires from 97 cancer patients in a university hospital in Tae-Gu from September to December of 1998. The sample data were collected by using a convenient sampling method. The following instruments were used in the study after some adaptation : Park Chai Soon's Health Promoting Lifestyle Profile, Oh Pok Ja's instrument for health promotion behavior and the Rosenbaum self-control schedule(SCS). The reliability of instruments was tested with Chronbach'alph(.79-.89). Data was analyzed by using the SAS program. T-test, ANOVA, and Pearson's coefficients of correlation. The results of this study were as follows: First, the average score of the resourcefulness variable was 22.20; the range of the score was from -30 to +81 The average score of the performance in the health promoting behavior variable was 96.13; the range of the score was from 39 to 137 Second, the resourcefulness variable was significantly different from such demographic factors as gender and perceived health status, but there was no statistically significant difference between the demographic factors and the health promoting behavior variable, except that of perceived health status. Third, the performance in health promoting behavior of cancer patients was significantly correlated with the resourcefulness of cancer patients(r= .50) In conclusion, resourcefulness was identified to be an important variable that could contribute to promote health-promoting behavior.

• 한국항공우주학회지
• /
• 제49권5호
• /
• pp.365-372
• /
• 2021

본 논문에서는 가변 연속사격 시간을 고려한 근접 방어 시스템(Closed-In Weapon System, CIWS)의 최적 무장 할당 알고리듬에 대해 다룬다. 본 연구에서 근접 방어 시스템의 무장 할당 문제는 혼합정수계획법(Mixed Integer Linear Programming, MILP)을 기반으로 정식화된다. 제안한 방법은 연속사격 시간을 교전 사거리와 관계없이 일정하다고 가정한 기존 연구와 달리 사거리에 따른 요격확률을 바탕으로 가변 연속사격 시간을 고려한다. 따라서 기존의 방법대비 보다 현실적인 교전상황을 반영할 수 있을 뿐만 아니라 표적 대응시간을 향상할 수 있다. 본 논문에서는 가변연속사격 시간이 반영되도록 기존의 혼합정수계획법 기반 무장 할당 문제를 변형시켰으며, 상용최적화 프로그램을 활용한 수치 시뮬레이션을 통해 제안한 방법의 성능을 검증하였다.

• 대한치과교정학회지
• /
• 제25권3호
• /
• pp.263-271
• /
• 1995

Canine retraction spring과 같은 looped wire에서, 각 변환요소에 따라 변하는 탄성 정도를 알아보기 위하여, wire의 재료, 굵기, loop에 소요된 길이, loop의 모양, gabling의 여부 등 5가지의 변환요소를 설정하여, 각 wire activation시의 탄성을 range, force, stiffness등의 면에서 알아보고자 하였다. wire의 재료적인 면에서 Hi-T (Unitek Co.)와 blue Elgiloy (Rocky Mountain Orthodontics)를 선택하였으며, 굵기로는 .016"$\;\times\;$.022" 와 .018"$\;\times\;$.025"를 선택하였다. loop 자체에 소요된 wire 길이를 15mm와 20mm의 두가지로, loop의 모양을 vertical open loop과 vertical closed loop의 두가지로, gabling의 양을 $0\circ$와 $30\circ$의 두가지로 하여 각각 제작하였다. 따라서 wire의 재료와 굵기, loop의 길이와 모양, gabling의 5가지 변환요소에 따라 32개군으로 구분되었으며, 각 군의 시료수는 8개씩으로, 총 256개의 시료를 대상으로 하였다. Instron(4202, Instron Co, USA)을 사용하여 각 시료의 하중변형 곡선을 얻었으며 elastic limit에서의 하중과 변형을 계측하고, 그때의 stiffness(force/range)를 산출하여, ANOVA 등의 통계처리로 32개군 간의 상관성을 조사하였다. 그 결과 wire의 재료, 굵기, loop의 길이, 모양, gabling모두가 looped wire의 하중 변형도에 유의한 영향을 미치는 것을 관찰할 수 있었으며, 탄성범위에서의 force는 Hi-T, .016"$\;\times\;$.022", loop 길이 20mm, open loop, non-gable군에서 가장 적었으며, blue Elgiloy, .018"$\;\times\;$.025", loop 길이 15mm, closed loop, non-gable군에서 가장 컸다. 탄성범위에서의 range는 Hi-T, .018"$\;\times\;$.025", loop길이 15mm, open loop, non-gable군이 가장 적었으며, Hi-T, .016"$\;\times\;$.022", loop길이 20mm, closed loop, gable군에서 가장 컸다. 또한 Looped wire의 탄성에 가장 큰 영향을 미치는 변환요소는 loop의 모양과 길이였으며, gabling의 영향이 가장 적었다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제14권5호
• /
• pp.579-587
• /
• 2014

This paper presents a variable gain amplifier (VGA) for an analog front-end (AFE) of ultrasound medical imaging. This VGA has a closed-loop topology and shows a 37-dB-linear characteristic with a single-stage amplifier. It consists of an op-amp, a non-binary-weighted capacitor array, and a gain-control block. This non-binary-weighted capacitor array reduces the required number of capacitors and the complexity of the gain-control block. The VGA has been fabricated in a 0.35-mm CMOS process. This work gives the largest gain range of 37 dB per stage, the largest P1 dB of 9.5 dBm at the 3.3-V among the recent VGA circuits available in the literature. The voltage gain is controlled in the range of [-10, 27] dB in a linear-in-dB scale with 16 steps by a 4-bit digital code. The VGA has a bandpass characteristic with a passband of [20 kHz, 8 MHz].