• 대한기계학회논문집B
• /
• 제35권3호
• /
• pp.287-291
• /
• 2011

증발하면서 원형으로 퍼져가고 있는 액체에 대한 모델을 지배하는 연립 상미분 방정식은 지금까지 수치해석적인 방법으로 풀어 왔는데 본 연구에서 섭동해를 최초로 구하였다. 액체의 순간적인 누출과 연속적인 누출에 대하여 섭동 변수로써 단위면적 당 증발률을 사용하여 1차항까지 섭동해를 구하였다. 1차 섭동해의 계산 결과 풀의 부피에 대하여 초기에는 수치해와 잘 일치 하였으나 후기에는 약간의 차이가 존재하였으며 풀의 반경에 대하여는 두가지 종류의 해가 거의 일치 하였다.

• 대한기계학회논문집B
• /
• 제20권5호
• /
• pp.1700-1716
• /
• 1996

The two-dimensional, unsteady, laminar conservation equations for mass, momentum, energy and species transport in the gas phase and mass, momentum and energy in the liquid phase are solved simultaneously in spherical coordinates in order to study heating and vaporization of a droplet entrained in the oscillating flow. The numerical solution gives the velocity and temperature distribution in both gas and liquid phase as a function of time. When the gas flow oscillates around an vaporizing droplet, the liquid flow circulates in the clockwise or counterclockwise direction and the temperature distribution in the liquid phase changes its shapes, depending on the gas fow direction. When the gas flow changes its direction of circulating liquid flow is opposite to the gas flow, forming two vortex circulating in the opposite direction. During the heating period, the difference in the maximum and minimum temperature is large, followed by the almost uniform temperature slightly below the boiling temperature. The mass and heat transfer from the droplet depend on the droplet temperature, droplet diameter and the magnitude of relative velocity, giving the droplet lifetime different from the d$^{2}$-law.

• 대한기계학회논문집B
• /
• 제23권6호
• /
• pp.778-787
• /
• 1999

In this study, the autoignition process of liquid fuel, injected into hot and stagnant air in a 2-D axisymmetric confined cylindrical combustor, has been investigated. Eulerian-Lagrangian scheme was adopted to analyze the two-phase flow and combustion. The unsteady conservation equations were used to solve the transition of the gas field. Interactions between two phases were accounted by using the particle source in cell (PSI-Cell) model, which was used for detailed consideration of the finite rates of transports between phases. And infinite conduction model was adopted for the vaporization of droplets. The results have shown that the process of the autoignition consists of heating up of droplets, vaporization, mixing and ignition. The ignition criteria could be determined by the temporal variations of temperature, reaction rate and species mass fraction. And the effects of various parameters on ignition phenomena are examined. These have shown that the increasing the reaction rate and/or the vaporization rate can reduce the ignition delay time.

• 한국항공우주학회지
• /
• 제33권4호
• /
• pp.71-78
• /
• 2005

초임계 상태의 질소 유동 환경에서 헵탄 액적의 기화 특성을 수치적으로 연구하였다. 더불어 실기체 효과와 액적 내부 순환, 다양한 열역학적 물성치 및 고압 효과를 고려하였다. 또한 헵탄 액적 바로 근처에서의 저속 유동 문제를 풀기 위하여 예조건화 스킴을 적용한 시간 전진법을 수치 코드에 적용하였다. 주위 유동 속도와 주위 압력을 변화 시켜가면서 액적의 거동을 살펴보았다. 유동 속도 증가로 인한 레이놀즈수의 증가에 따라 액적의 변형이 활발히 이루어졌고, 동일한 레이놀즈수에 대해서는 압력이 높아질수록 액적의 변형이 약화되었다.

• 한국연소학회지
• /
• 제4권1호
• /
• pp.17-26
• /
• 1999

Vaporization, ignition and combustion of fuel droplets in tandem array are theoretically investigated to understand the droplet interactions in combustors. Including the effects of density variation in gas-phase, internal circulation and transient liquid heating, a numerical studies are performed by changing parameters such as initial droplet temperatures, initial droplet spacings, initial Reynolds numbers, surrounding gas temperatures, and activation energies of fuel vapors. Combustion regime maps classify the droplet combustion phenomena according to the configuration and location of the flame with respect to injection Reynolds numbers and surrounding gas temperatures. In addition, it is shown that the dynamic histories of droplets and ignition delay times are dependent on droplet size ratios and initial spacings of tandem droplets.

• 한국수소및신에너지학회논문집
• /
• 제21권3호
• /
• pp.184-192
• /
• 2010

PEM fuel cell produces electric power, water and heat by the electrochemical reaction of hydrogen and oxygen. The heating value is dependent on the molar enthalpy of vaporization of product water and the performance loss. In this paper, the heating value of fuel cell stack has been studied under various stack operating temperatures to achieve more efficient heat management. A technology using the molar enthalpy of vaporization of product water is suggested to reduce heat-up time during start-up of a fuel cell vehicle.

• 대한기계학회논문집B
• /
• 제20권6호
• /
• pp.1983-1993
• /
• 1996

For selected (pure and compound) metallic species effects of saturation ratio, temperature, particle size and number density on condensation mechanisms are first reviewed. The tendencies for vaporization and condensation differ between metallic species because of the significant differences in their saturation pressures. Then particle pressure of a metal vapor species at incineration temperature is calculated by simplifying waste as a compound of methane, chlorine and small amounts of metals and assuming a thermodynamic equilibrium state. Next the condition is assessed for which supersaturation of combustion gases by the species above the critical level for homogeneous condensation may occur, when the gases contain a large number of pre-existing particles such as entrained ashes. Regardless of the presence of chlorine in the waste, the homogeneous condensation of PbO vapors may occur, depending on number density of the pre-existing particles. However, when chlorine exists in the waste, the homogeneous condensation of PbCl$_2$vapors does not occur, which is similar to the case of Cd and Hg vapors. Thus these highly volatile species, PbCl$_2$, Cd, and Hg, may emit to atmosphere as vapor phase. In general, for reducing the emission of hazardous metallic species into the atmosphere, the number density of pre-existing particles has to be increased. For fixed particle number density, the temperature drop rate must be kept in low if the temperature at which a condensable vapor species emits from a incineration system is fixed, while the temperature drop rate must be kept in high if the residence time for which a condensable species stays in the system is fixed.

• Investigative and Clinical Urology
• /
• 제59권6호
• /
• pp.392-398
• /
• 2018

Purpose: To evaluate the initial experience and outcome of photo-selective vaporization of the prostate (PVP) for benign prostatic hyperplasia (BPH) in Pakistan with the use of a 980 nm diode laser. Materials and Methods: A prospective study was performed from November 2016 to December 2017. A total of 100 patients diagnosed with bladder outlet obstruction secondary to BPH who planned for PVP were enrolled in the study. PVP was carried out with a diode laser at 980 nm (Biolitec Diode 180W laser) in a continuous wave with a 600 nm (twister) fiber. Baseline characteristics and perioperative data were compared. Postoperative outcomes were evaluated by International Prostate Symptom Score (IPSS), post void residual (PVR) and maximum urinary flow rate (Qmax) at 3 and 6 months after surgery. Results: The mean age was $65.82{\pm}10.42$, mean prostate size was $67.35{\pm}16.42$, operative time was $55.85{\pm}18.01$ and total energy was $198.68{\pm}49.12kJ$. At 3 months and 6 months, significant improvements were noted (p<0.001) in IPSS $7.04{\pm}1.69$ (-18.92), Qmax $19.22{\pm}4.75mL/s$ (+13.09) and and PVR $18.89{\pm}5.39mL$ (-112.80). Most frequent problems were burning micturition (35%) and terminal dysuria (29%). No significant difference in postoperative hemoglobin was seen in patients who were on anti-platelet drugs. Conclusions: PVP with a diode laser is a safe and effective procedure for the treatment of BPH and is also safe in patients who are on anti-platelet agents.

• 한국추진공학회지
• /
• 제18권3호
• /
• pp.1-7
• /
• 2014

친환경 추진제인 액체메탄을 연료로 사용하는 이원추진제 로켓엔진의 이론성능분석을 통해 엔진의 설계변수를 도출하였다. 엔진의 연소성능 예측을 위해 CEA를 활용한 화학평형해석을 수행하였으며, 추진제 혼합비 및 연소실 내부압력에 따른 연소성능 특성을 고찰하였다. 엔진의 특성길이 도출을 위해 1차원 액적기화모델을 적용하여 성능변수 변화에 따른 추진제의 기화시간을 계산하였으며, 지상연소 이론성능분석을 통해 메탄 이원추진제 로켓엔진의 설계제원을 제시하였다.

• 마이크로전자및패키징학회지
• /
• 제7권4호
• /
• pp.1-5
• /
• 2000

열전반도체 ($Pb_{1-x}Sn_{x}$)Te를 AC통전 가압법으로 제조하여 그물성에 대해서 연구하였다. 균질성 향상과 구성 성분의 휘발방지에 유효한 진동분쇄공정으로 기계적 합금화를 시켰다. Sn 함량이 증가함에 따라 합금화에 요구되는 기계적 합금화 시간이 증가되었다. AC 통전 hot press법으로 873-923 K에서 1~4분간 150 kgf/$\textrm{cm}^2$의 압력으로 소결하였다. 단시간의 소결은 Te의 증발을 억제할 수 있었다. ($Pb_{1-x}-Sn_{x}$)Te 밀도는 소결 시간보다 소결온도에 더 영향을 받았다. Sn첨가량이 10 mol% 이하일때 온도 상승에 따라 p-n전이 현상이 일어났으나 그 이상의 함량에서는 p-type반도성이 그대로 유지됨이 관찰되었다. 열기전력은 500 K, x=0.2일때 250 $\mu$V/K의 최대치론 나타내었다. Sn함량의 증가에 따라 최대치는 낮아졌으며, 그 온도는 고온측으로 이동하였으며, 전기전도도의 최대치는 온도가 상승함에 따라 저하되었다.