• Korean Journal of Organic Agriculture
• /
• v.23 no.1
• /
• pp.91-101
• /
• 2015

'Chuhwangbae' pears (Pyrus pyrifolia Nakai) were investigated on how types of paper bag and harvesting dates influenced on skin blackening before harvest as well as fruit quality after harvest. Experiments included four different types of paper bags (NP/YP, GP/YP, NP/BP, and NP/RP) and five different harvesting dates [160, 170, 180, 190, and 200 days after full bloom (DAFB)]. NP/YP and GP/YP indicated for newspaper- and gray paper-outer bag, respectively, with yellow paper-inner bag of the both. NP/BP and NP/RP indicated for newspaper-outer bag of the both with black paper- and red paper-inner bag, respectively. The NP/YP (newspaper/yellow paper) showed high absorbance and air and water vapor permeability in the bags, while the NP/RP (newspaper/red paper) resulted in poor physical properties in the bags. Fruit enclosed with NP/YP resulted in the absence of skin blackening, but fruit with NP/RP bags had the highest skin blackening (12.7%). Occurrence of skin blackening was concentrated on the middle and calyx end-part of fruit region. NP/RP bag treatment was likely to increase fruit weight, firmness, titratable acidity, and fruit surface color. Harvest at high relative humidity in air increased skin blackening of fruit. Later fruit harvest, such as 190 and 200 DAFB, increased skin blackening, fruit weight, and sugar content while decreasing fruit firmness and titratable acidity.

• Korean Journal of Food Science and Technology
• /
• v.20 no.3
• /
• pp.380-384
• /
• 1988

The coefficients of the hot-air and freeze dried garlic isotherms and the critical water activities of these were estimated to be 0.85-0.94 by the linear regression and 0.58-0.60 by the sensory evaluation and ${\Delta}E$ value. Water adsorption rate(K) of hot-air dried garlic packaged with $48{\mu}m$ low density polyethylene(LDPE) decreased from $0.12g\;H_2O/100g/day\;to\;0.093g\;H_2O$/100g/day with decreasing the package dimension from $0.051m^2\;to\;0.029m^2\;at\;40^{\circ}C$ and 75% RH, and that of freeze dried one decreased from $0.17g\;H_2O/100g/day\;to\;0.12g\;H_2O$/100g/day as the filling weight increased from 50g to 10g in the package of $0.051m^2$. Shelf-life of hot-air dried garlic packaged with $80{\mu}m$ LDPE were 99days at $40^{\circ}C,\;283day\;at\;30^{\circ}C\;and\;455\;days\;at\;15^{\circ}C$ in the 75% RH. The differences of water contents between predicted data with water vapor permeability of the conventional method and experimental data were 0-1.5% in the water content range of around 13-18%, but about 2 in the water content range of around 8-11%.

• Korean Journal of Food Science and Technology
• /
• v.37 no.1
• /
• pp.142-146
• /
• 2005

Soy protein isolate (SPI) film was laminated with corn zein or wheat gluten to improve functional properties. Both SPI/corn zein-laminated film (Film B) and SPI/wheat gluten-laminated film (Film C) showed increased tensile strength by 150%, compared to control (Film A). Film C showed significant 253% increase in percentage elongation. Water vapor permeability (WVP) of Films B and C decreased slightly compared to Film A. Solubility values of Films B and C were lower than that of Film A. Hunter color values of Films A and C were not significantly different, while Film B showed yellowness due to presence of corn zein. These results suggest SPI/wheat gluten-laminated film is suitable as packaging material.

• Korean Journal of Food Science and Technology
• /
• v.35 no.2
• /
• pp.217-221
• /
• 2003

Effect of direct addition of $CaCl_2$ into sodium alginate film-making solution and immersion of alginate films into $CaCl_2$ solutions on tensile strength (TS), percentage elongation at break (E), water vapor permeability (WVP), and water solubility (WS) of the films were investigated. TS of alginate films prepared by both methods increased. E of $CaCl_2-added$ films did not change significantly (P>0.05), whereas that of $CaCl_2-immersion$ films decreased significantly (p<0.05). WVP of films prepared by both methods decreased significantly, but the effect was more significant in the $CaCl_2-immersion$ films. Water resistance was not changed in the $CaCl_2-added$ films, whreras increased significantly in $CaCl_2-immersion$ films (p<0.05). Properties of alginate films depend on the concentration of $CaCl_2$ treatments in both methods, and they also depend on treatment time in the immersion method.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.1
• /
• pp.121-125
• /
• 2006

To study the effects of plasticizer concentration and its ratio on the physical properties of silk fibroin films, polyethylene glycol (PEG) was used at 4 different concentrations; 1, 2, 3, $4.5\%$ (w/v). Tensile strength (TS) and water vapor permeability (WVP) increased with the increase of PEG concentration, while opposite trend was observed for percent elongation of silk fibroin films. WVP of silk fibroin films increased from $2.54\;ng{\cdot}m/m^2spa$ for $1\%$ of PEG to $5.41\;ng{\cdot}m/m^2sPa$ for $4.5\%$. In addition, a mixture of PEG and glycerol (Gly) as a plasticizer was used at the ratio of 100:0, 75:25, 50:50, 25:75, and 0:100 (w/w). Percent elongation of the films was improved to $130.95\%$ when the ratio of 75:25 was used. On the contrary, WVP of silk fibroin films increased with the decrease of the ratio of PEG:Gly. Effect of the plasticizer concentration and its ratio on the color of silk fibroin films was negligible. These results suggest that mixture of PEG and Gly as a plasticizer provide more flexible than PEG alone in silk fibroin films, and the best ratio of PEG to Gly was 75:25.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.6
• /
• pp.727-731
• /
• 2009

Effects of various plasticizers (1.5%) such as glycerol, sorbitol, fructose, sucrose, and polypropylene glycol, and ferulic acid on the physical properties of Gelidium corneum (GC) film were examined. GC films containing plasticizer and ferulic acid were prepared by incorporating various amounts (10, 30, 50, 70, 100 mg/100 mL) of ferulic acid into the film. Water vapor permeability (WVP) of the GC film varied depending on the type of plasticizer, and among them the film containing sucrose had the lowest WVP. Tensile strength (TS) and % elongation (%E) of the film were in the range of $1.29{\sim}11.29$ MPa and $5.55{\sim}36.44$ %, respectively, and the WVP values were of $1.30{\sim}1.60\;ng\;m/m^{2}sPa$. In addition, the GC films were prepared using ferulic acid as a cross-linking agent. WVP of the film decreased with the addition of ferulic acid, and the film containing 30 mg ferulic acid had the lowest WVP value. TS value of the GC film containing 10 mg of ferulic acid was significantly higher than that of the control. However, further increase of ferulic acid concentration decreased the TS value. Therefore, 10 mg of ferulic acid was determined to be the optimal concentration for the film.

• Food Science of Animal Resources
• /
• v.29 no.3
• /
• pp.391-395
• /
• 2009

Gelidium corneum - gelatin (GCG) blend films containing fermented pollen extract (FPE) were prepared and used as a packaging material of pork loins. Water vapor permeability (WVP) of the film containing FPE was better than the control film, and the film's antimicrobial activity against Escherichia coli O157:H7 and Listeria monocytogenes increased with increasing FPE concentration. Addition of 0.15% FPE decreased the populations of Escherichia coli O157:H7 and Listeria monocytogenes by 2.98 and 3.68 Log CFU/g, respectively, compared to the control. Pork loin samples were inoculated with E. coli O157:H7 and L. monocytogenes and packed with the film. The samples packed with the GCG film containing 0.15% FPE had a decrease in the populations of E. coli O157:H7 and L. monocytogenes by 1.49 and 1.01 Log CFU/g after 4 d of storage, respectively, compared to the control. The results suggested that shelf life of the pork loins could be extended by packaging with the GCG film containing 0.15% FPE.

• Korean Journal of Food Science and Technology
• /
• v.53 no.5
• /
• pp.634-639
• /
• 2021

This study investigated the effects of cold plasma (CP) treatment on the properties of biopolymer films prepared with defatted mustard meal (DMM films). CP treatments using N₂, O₂, He, Ar, and dry air did not affect the tensile properties, water vapor permeability, color, and morphology of DMM films, whereas the treatments using He and Ar improved their printability. The tensile strength (TS) of O₂- or air-CP-treated DMM films and the elastic modulus (EM) of O₂-, He-, Ar-, or air-CP-treated films were lower than those of the untreated films. An increase in the power of Ar-CP treatment resulted in an increase in EM. The optimum treatment power and time for minimizing yellowness changes by Ar-CP treatment were 420 W and 40 min, respectively. The results demonstrated the potential application of CP treatment to improve the film properties of DMM films and possibly other agricultural by-product-based biopolymer films, making the films more applicable to food packaging.

• Korean Journal of Food Science and Technology
• /
• v.54 no.2
• /
• pp.179-184
• /
• 2022

In this study, edible films made of fish and mammalian gelatins were produced using heat pressing, and their physical properties were investigated. Transparent and smooth films were formed continuously and uniformly using a mixture of fish skin gelatin (FG) or mammalian gelatin (MG), glycerol, and water under the process of heat pressing at 90℃ and 20 MPa for 5 min. Heat-pressed FG films possessed lower light transmittance and tensile strength than heat-pressed MG films; however, their appearance, surface morphology, water vapor permeability, lightness, and redness were not different from those of heat-pressed MG films. Although heat-pressed FG films had lower tensile strength, they had a flatter and more uniform surfaces and demonstrated higher transparency and moisture barrier properties compared to the casted FG films. These results demonstrate the potential utility of heat pressing for the large-scale production of edible films using both FG and MG.

• Korean Journal of Food Science and Technology
• /
• v.54 no.3
• /
• pp.327-333
• /
• 2022

An orally disintegrating film (ODF) based on hyaluronic acid (HA) containing vitamin D was developed. The vitamin D content in the ODF was set based on the adequate intake (AI) of vitamin D from 0 to 10 AI (0, 1, 4, 7, and 10AI). The control (0AI) had the highest thickness and showed the longest disintegration time among the samples. The moisture content of the ODFs was significantly lower in those with vitamin D compared to the control. As the amount of vitamin D increased, the water vapor permeability (WVP) of the ODFs decreased, and the opacity significantly increased. The tensile strength was higher in the films containing vitamin D compared to the control films. However, the elongation at the break showed no significant difference among the films. The vitamin D content in the film was reduced by 25.7-44.2% during processing compared to the amount that was originally added. Based on the above results, a new and convenient vitamin D delivery system, an ODF, could be successfully produced.