• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.895-898
• /
• 1999

We calculated Al-Absorption, Al-reflection, and Si-etching probabilities as a function of incident angle and energy using classical molecular dynamics (MD) simulation. Variations of the cases of Al-absorption rate and Al-reflection rate are less than that of Si-etching rate. In contrast with general prediction, our simulation results showed that channeling of the <110> direction occurred the most in the case of incident angle between 30degree and 40degree. We investigated that channeling of the <110> directions quite affect Al-absorption rate in silicon. Since Si-etching rate is high and Al-absorption rate by <110> channeling is high, we found that Al ionized physical vapor deposition (PVD) on Si(001) has a different characteristics with Al ionized PVD on A1(111).

• 설비공학논문집
• /
• 제16권2호
• /
• pp.194-201
• /
• 2004

In the present study, the improvement of absorption characteristics on combined heat and mass transfer process in a falling film of a vertical absorber by change of geometric parameters were studied experimentally and analytically. The energy and diffusion equations are solved simultaneously to give the temperature and concentration variations at the liquid solution-refrigerant vapor interface and at the wall. Absorption behaviors of heat and mass transfer were analyzed through falling film of the LiBr aqueous solution contacted by refrigerant vapor in the absorber. Effects of film Reynolds number, geometric parameters by insert device (spring) and flow pattern on heat and mass transfer performances have been also investigated. Especially, effects of the flow pattern by geometric parameters have been considered to observe the total heat and mass transfer rates through falling film along the absorber. As a numerical and experimental result, maximum absorption rate was shown at the wave-flow by insert device (spring). The error ranges between experiment and analysis were from 5.8 to 12％ at Re$_{f}$ > 100.0.

• 대한원격탐사학회지
• /
• 제37권5_2호
• /
• pp.1295-1305
• /
• 2021

연안 및 대양의 효과적인 모니터링을 위해 여러 연구 분야에서 고품질의 위성 기반 해색 산출물들이 요구 있으며 이를 위해서는 정확한 대기 효과의 보정이 필수적이다. 현재 Geostationary Ocean ColorImage (GOCI)-II 지상시스템에서는 수증기 및 오존 등에 의한 가스 흡광 보정을 수행하기 위해 European Centre for Medium-Range Weather Forecasts (ECMWF) 또는 National Centers for Environmental Prediction (NCEP) 기상장 자료를 사용하고 있다. 이 과정에서 기상장 자료의 낮은 시공간해상도로 인해 오차가 발생할 수 있다. 따라서 본 연구에서는 복사 전달 모델 모의를 통해 개발된 GOCI-II의 수증기 흡광 보정 모델 및 GeoKompsat (GK)-2A/Advanced Meteorological Imager (AMI)의 가강수량 자료를 이용하여 수증기 흡광 효과를 보정하고 이에 따른 영향력을 분석하였다. 개발된 수증기 흡광 보정 모델 적용 유무에 따른 오차는 수증기의 영향이 적은 620 nm와 680 nm의 대기 상한 반사도에서 최대 1.3%와 0.27%로 적은 오차를 보였다. 그러나 수증기 흡광의 경향이 큰 709 nm 채널의 경우 태양 천정각 및 가강수량에 따라 6~15%의 큰 오차를 나타냈다. 레일리 보정 반사도에서는 대기 상한 반사도에서 발생한 오차가 크게 증폭되어 태양 천정각에 따라 GOCI-II의 각 밴드(620~865 nm) 별로 1.46~4.98, 7.53~19.53, 0.25~0.64, 14.74~40.5, 8.2~18.56, 5.7~11.9%의 큰 오차를 보이고 있다. 이는 수증기 흡광 보정이 해색 산출물의 정확도와 안정성에 큰 영향을 미칠 수 있다는 것을 의미하며, 향후 시공간 해상도가 높은 GK-2A/AMI와의 융합을 통해 GOCI-II 해색 산출물의 정확도 향상이 가능함을 시사한다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제34회 춘계학술대회논문집
• /
• pp.383-389
• /
• 2010

적외선 흡수법을 사용하여 액체 헵탄 수직분사제트의 증기농도를 정성적으로 측정하였다. 본 연구의 목적은 모형 램젯 연소기에서 레이저를 이용한 적외선 흡수법으로 액체연료의 분열부터 기화까지의 과정을 이해하는 것이다. 실험결과로부터 헥산 증기 몰분율은 온도가 증가함에 따라 증가하였으나 연료공기 운동량비 변화에 대해서는 큰 차이가 나지 않았다.

• 한국추진공학회지
• /
• 제14권4호
• /
• pp.25-31
• /
• 2010

적외선 흡수법을 사용하여 액체 헥산 수직분사제트의 증기농도를 정성적으로 측정하였다. 본 연구의 목적은 모형 램제트 연소기에서 레이저를 이용한 적외선 흡수법으로 액체연료의 분열부터 기화까지의 과정을 이해하는 것이다. 실험결과로부터 헥산 증기 몰분율은 온도가 증가함에 따라 증가하였으나 연료 공기 운동량비 변화에 대해서는 큰 차이가 나지 않았다.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2002년도 춘계학술대회논문집
• /
• pp.41-47
• /
• 2002

A model of simultaneous heat and mass transfer process in absorption of refrigerant vapor into a lithium bromide solution of water-cooled vertical plate absorber was developed. The model can predict temperature and concentration profiles as well as the absorption heat and mass fluxes, the total heat and mass transfer rates and the heat and mass transfer coefficients. Besides, the effect of operating condition on absorption mass flux has been investigated, with the result that the absorption mass flux is increased as the inlet cooling water temperature decreases, the system pressure increases and the inlet solution concentration increases. And among the effects of operating parameters on absorption mass flux, the effect of inlet solution concentration is dominant.

• 설비공학논문집
• /
• 제16권6호
• /
• pp.599-607
• /
• 2004

The purpose of this study is to reevaluate the performance of Hanji as an architectural material. Hanji has good things in controlling indoor space comfortably. Particularly, ability of controlling humidity of Hanji affects indoor space comfort and human health. The major focuses of this experimental research are (1) how much of water vapor passes through Hanji, (2) how much of water vapor is absorbed into Hanji. In the first case, indoor humidity is higher than outdoor humidity. In this case, approximately 38 g of water vapor passes through Hanji 1, genarally utilized in window paper (Changhoji), per square meter in one hour. And approximately 4 g of water vapor is absorbed into Hanji 2, genarally utilized in wallpaper, per square meter. In the second case, outdoor humidity is higher than indoor humidity. In this case, Hanji passes water vapor to inner space at first, but when indoor relative humidity reach approximately 66%, although outdoor humidity is higher than indoor humidity, water vapor doesn't pass through Hanji. If Hanji is utilized in window material and wallpaper, indoor space is maintained comfortably without mechanical devices in humidity control.

• 설비공학논문집
• /
• 제10권5호
• /
• pp.581-588
• /
• 1998

An experimental study of the absorption process of water vapor into Lithium Bromide solution was performed. For the purpose of development of high performance absorption chiller-heater utilizing Lithium Bromide solution as working fluid, the absorber is the most effective to improve the performance of an absorber because it requires the largest heat transfer area in an absorption chiller-heater system. This paper introduces bare tube and floral tube for the absorber of absorption chiller-heaters. floral tube has higher heat and mass transfer performance than bare tube conventionally used in absorbers and the it is expected to perform high heat and mass transfer. This paper will provide important information on the selection of absorber tubes in commercial absorption chiller -heaters.

• Journal of Advanced Marine Engineering and Technology
• /
• 제24권4호
• /
• pp.478-485
• /
• 2000

An experimental study of the absorption process of water vapor into lithium bromide solution was performed. For the purpose of development of high performance absorption chiller-heater utilizing Lithium Bromide solution as working fluid, the absorber is the most effective to improve the performance of an absorber because it requires the largest heat transfer area in an absorption chiller-heater system. This paper introduces bare tube and inner ribbed notched fin tube for the absorber of absorption chiller-heaters. Inner ribbed notched fin tube has about 10∼20% higher heat and mass transfer performance than bare tube conventionally used in absorbers and the it is expected to perform high heat and mass transfer. This paper will provide important information on the selection of absorber tubes in commercial absorption chill-heaters.

• Journal of Industrial and Engineering Chemistry
• /
• 제68권
• /
• pp.335-341
• /
• 2018

We report the catalytic effects of metal oxides on the $CO_2$ absorption rate in an aqueous potassium salt of ${\text\tiny{L}}-lysine-HCl$ using the vapor liquid equilibrium method. The best $CO_2$ absorption rate obtained through testing metal oxides in a highly concentrated potassium salt of amino acids (2.0 M) was identified using CuO. The recyclability of the metal oxides was tested over three cycles. The catalyst CuO was found to enhance the absorption rate of $CO_2$ by 61%. A possible mechanism was proposed based on NMR spectroscopy studies. Further, the effect of change in liquid absorbent viscosity on $CO_2$ absorption is discussed.