• Proceedings of the Korean Vacuum Society Conference
• /
• 2004.02a
• /
• pp.94-94
• /
• 2004

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2010.04a
• /
• pp.203-204
• /
• 2010

• Proceedings of the Korean Vacuum Society Conference
• /
• 2004.08a
• /
• pp.152-152
• /
• 2004

• Transactions on Electrical and Electronic Materials
• /
• v.11 no.1
• /
• pp.1-10
• /
• 2010

This is an overview paper reporting our most recent work on processing and microstructure of nano-structured oxides and their photoluminescence and photo-catalysis properties. Zinc oxide and related transition metal oxides such as vanadium pentoxide and titanium dioxide were produced by a combination of magnetron sputtering, hydrothermal growth and atmosphere controlled heat treatment. Special morphology and microstructure were created including nanorods arrays, core-brushes, nano-lollipops and multilayers with very large surface area. These structures showed special properties such as much enhanced photoluminescence and chemical reactivity. The photo-catalytic properties have also been promoted significantly. It is believed that two factors contributed to the high reactivity: the large surface area and the interaction between different oxides. The transition metal oxides with different band gaps have much enhanced photoluminescence under laser stimulation. Use of these complex oxide structures as electrodes can also improve the energy conversion efficiency of solar cells. The mixed oxide complex may provide a promising way to high-efficiency photo emitting materials and photo-catalysts.

• Korean Journal of Materials Research
• /
• v.31 no.7
• /
• pp.382-385
• /
• 2021

Well-crystallized vanadium pentoxide V₂O₅ thin films are fabricated on MgO single crystal substrates by using pulsed-laser deposition technique. The linear optical transmission spectra are measured and found to be in a wavelength range from 300 to 800 nm; the data are used to determine the linear refractive index of the V₂O₅ films. The value of linear refractive index decreases with increasing wavelength, and the relationship can be well explained by Wemple's theory. The third-order nonlinear optical properties of the films are determined by a single beam z-scan method at a wavelength of 532 nm. The results show that the prepared V₂O₅ films exhibit a fast third-order nonlinear optical response with nonlinear absorption coefficient and nonlinear refractive index of 2.13 × 10^-10 m/W and 2.07 × 10^-15 cm²/kW, respectively. The real and imaginary parts of the nonlinear susceptibility are determined to be 3.03 × 10^-11 esu and 1.12 × 10^-11 esu, respectively. The enhancement of the nonlinear optical properties is discussed.

• Resources Recycling
• /
• v.33 no.3
• /
• pp.3-11
• /
• 2024

This study addressed the cost structure of metallurgical plants for vanadium recovery or production, which were previously planned or implemented. Vanadium metallurgy consists of several sub-processes such as such as pretreatment, roasting, leaching, precipitation, and filtration, in order to finally produce vanadium pentoxide. Here, lots of costs should be spent for such plants, in which these costs are largely divided into CAPEX (Capital Expenditure) and OPEX (Operational Expenditure). As a result, the capacities (feed input rates) and vanadium contents are various along the target projects for this study. However, final production rates and grades of vanadium pentoxide showed relatively small differences. In addition, a noticeable correlation is found between capacities and specific operating costs, in that a steadily decreasing trend is described with a non-linear curve with around -0.3 power. Therefore, for the plant capacity below 100,000 tons per year, the specific operating cost rapidly decreases as the capacity increases, whereas the cost remains relatively stable in the range of 0.6 to 1.2 million tons per year of the capacity. From a technical perspective, effective optimization of the metallurgical process plant can be achieved by improving vanadium recovery rate in the pre-treatment and/or roasting-leaching processes. Finally, the results of this study should be updated through future research with on-going field verification and further detailed cost analysis.

• Resources Recycling
• /
• v.31 no.2
• /
• pp.20-32
• /
• 2022

This study implemented a chelating agent (Ethylenediaminetetraacetic acid, EDTA) in purification to obtain high-purity vanadium pentoxide (V₂O₅) for use in VRFB (Vanadium Redox Flow Battery). V₂O₅ (powder) was produced through the precipitation recovery of ammonium metavanadate (NH₄VO₃) from a vanadium solution, which was prepared using a low-purity vanadium raw material. The initial purity of the powder was estimated to be 99.7%. However, the use of a chelating agent improved its purity up to 99.9% or higher. It was conjectured that the added chelating agent reacted with the impurity ions to form a complex, stabilizing them. This improved the selectivity for vanadium in the recovery process. However, the prepared V₂O₅ powder exhibited higher contents of K, Mn, Fe, Na, and Al than those in the standard counterparts, thus necessitating additional research on its impurity separation. Furthermore, the vanadium electrolyte was prepared using the high-purity V₂O₅ powder in a newly developed direct electrolytic process. Its analytical properties were compared with those of commercial electrolytes. Owing to the high concentration of the K, Ca, Na, Al, Mg, and Si impurities in the produced vanadium electrolyte, the purity was analyzed to be 99.97%, lower than those (99.98%) of its commercial counterparts. Thus, further research on optimizing the high-purity V₂O₅ powder and electrolyte manufacturing processes may yield a process capable of commercialization.

• Korean Journal of Materials Research
• /
• v.34 no.8
• /
• pp.387-394
• /
• 2024

Transition metal oxide-based materials have mainly been studied as electrodes for energy storage devices designed to meet essential energy demands. Among transition metal oxide-based materials, hydrated vanadium pentoxide (V₂O₅·nH₂O), a vanadium oxide material, has demonstrated great electrochemical performance in the electrodes of energy storage devices. Graphene oxide (GO), a carbon-based material with high surface area and high electrical conductivity, has been added to V₂O₅·nH₂O to compensate for its low electrical conductivity and structural instability. Here, V₂O₅·nH₂O/GO nanobelts are manufactured with water without adding acid to ensure that the GO is uniformly dispersed, using a microwave-assisted hydrothermal synthesis. The resulting V₂O₅·nH₂O/GO nanobelts exhibited a high specific capacitance of 206 F/g and more stable cycling performance than V₂O₅·nH₂O without GO. The drying conditions of the carbon paper electrodes also resulted in more stable cycling performance when conducted at high vacuum and high temperature, compared with low vacuum and room temperature conditions. The improvement in electrochemical performance due to the addition of GO and the drying conditions of carbon paper electrodes indicate their great potential value as electrodes in energy storage devices.

• Korean Chemical Engineering Research
• /
• v.57 no.6
• /
• pp.891-897
• /
• 2019

In this study, heteropoly acid PVMo catalysts were supported on activated carbon with various composition of phosphoric acid ($H_3PO_4$), vanadium (V) pentoxide ($V_2O_5$) and molybdenum (VI) trioxide ($MoO_3$). Catalytic performance was examined at $140^{\circ}C$ for 1hour in vapor formaldehyde. XRD and BET analyses were carried with the catalysts before and after the reaction. Formaldehyde conversion was increased with decreasing Mo and $H_3PO_4$ content and increasing $V_2O_5$ content. Acidity of the catalysts was investigated with $NH_3-TPD$. Crystallinity of the catalysts was relatively low, and surface area was decreased after the reaction. In $NH_3-TPD$ result, the ratio of strong acid site corresponding to $NH_3$ desorption between $400^{\circ}C$ and $500^{\circ}C$ was increased by decreasing $MoO_3$ and $H_3PO_4$ content and increasing $V_2O_5$ content. Therefore, it was found that the strong acid site could affect the catalytic reactivity in vapor formaldehyde conversion.

• Resources Recycling
• /
• v.13 no.4
• /
• pp.32-38
• /
• 2004

Recently, Orimulsion (a bitumen-in emulsion) has received increasing attention as an alternative fuel. Orimulsion combusion produces an ash rich in V, Ni and Mg which are processed to recover metals. As a basic study to recover V from Orimulsion ash, physico-chemcial properties and leaching behaviours were investigated. Orimulsion ash was fine size grains ($d_{50}$ 5.9 $\mu\textrm{m}$) with 16% V, 4 % Ni and 9% S. Vanadium was easily leached in water because Orimulsion ash was mainly constituted of metal sulfates. However, the increase of leaching temperature decreased the extraction percentage of vanadium because of hydrolysis of V(V) to vanadium pentoxide. The addition of sulfuric acid could increase the leaching percentage vanadium. In case of alkaline leaching for selective recovery of vanadium, the oxidzing agent such as $H_2$$O_2$ is required to improve the leaching per-centage