• 한국생물공학회:학술대회논문집
• /
• 2005.10a
• /
• pp.910-910
• /
• 2005

• 한국생물공학회:학술대회논문집
• /
• 2005.10a
• /
• pp.295-295
• /
• 2005

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.11
• /
• pp.923-932
• /
• 2002

A stoichiometric mixture of evaporating materials for CdIn$\_$2/S$\_$4/ single crystal thin films was prepared from horizontal furnace. To obtain the single crystal thin films, CdIn$\_$2/S$\_$4/ mixed crystal was deposited on thoroughly etched semi-insulating GaAs(100) substrate by hot wall epitaxy(HWE) system. The source and substrate temperatures were 630 $\^{C}$ and 420 $\^{C}$, respectively. The crystalline structure of single crystal thin films was investigated by the photoluminescence and double crystal X-ray diffraction(DCXD). The carrier density and mobility of CdIn$\_$2/S$\_$4/ single crystal thin films measured from Hall effect by van der Pauw method are 9.01$\times$10$\^$16/ cm$\^$-3/ and 219 ㎠/V$.$s at 293 K, respectively. From the optical absorption measurement, the temperature dependence of energy band gap on CdIn$\_$2/S$\_$4/ single crystal thin films was found to be Eg(T) ＝ 2.7116 eV - (7.74 $\times$ 10$\^$-4/ eV) T$\^$2//(T＋434). After the as-grown CdIn$\_$2/S$\_$4/ single crystal thin films was annealed in Cd-, S-, and In-atmospheres, the origin of point defects of CdIn$\_$2/S$\_$4/ single crystal thin films has been investigated by the photoluminescence(PL) at 10 K. The native defects of V$\_$cd/, V$\_$s/, Cd$\_$int/ and S$\_$int/ obtained by PL measurements were classified as donors or accepters type. And we concluded that the heat-treatment in the S-atmosphere converted CdIn$\_$2/S$\_$4/ single crystal thin films to an optical p-type. Also, we confirmed that In in CdIn$\_$2/S$\_$4/GaAs did not from the native defects because In in CdIn$\_$2/S$\_$4/ single crystal thin films existed in the form of stable bonds.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.175-178
• /
• 2004

The stochiometric mixture of evaporating materials for the $ZnIn_2S_4$ single crystal thin film was prepared from horizontal furnace. To obtain the $ZnIn_2S_4$ single crystal thin film, $ZnIn_2S_4$ mixed crystal was deposited on throughly etched semi-insulating GaAs(100) in the Hot Wall Epitaxy(HWE) system. The source and substrate temperature were $610^{\circ}C$ and $450^{\circ}C$, respectively and the growth rate of the $ZnIn_2S_4$ sing1e crystal thin film was about $0.5\;{\mu}m/hr$. The crystalline structure of $ZnIn_2S_4$ single crystal thin film was investigated by photoluminescence and double crystal X-ray diffraction(DCXD) measurement. The carrier density and mobility of $ZnIn_2S_4$ single crystal thin film measured from Hall effect by van der Pauw method are $8.51{\times}10^{17}\;cm^{-3}$, $291\;cm^2/V{\cdot}s$ at $293_{\circ}\;K$, respectively. From the photocurrent spectrum by illumination of perpendicular light on the c - axis of the $ZnIn_2S_4$ single crystal thin film, we have found that the values of spin orbit splitting ${\Delta}S_O$ and the crystal field splitting ${\Delta}Cr$ were 0.0148 eV and 0.1678 eV at $10_{\circ}\; K$, respectively. From the photoluminescence measurement of $ZnIn_2S_4$ single crystal thin film, we observed free excition $(E_X)$ typically observed only in high quality crystal and neutral donor bound exciton $(D^{o},X)$ having very strong peak intensity The full width at half maximum and binding energy of neutral donor bound excition were 9 meV and 26 meV, respectively, The activation energy of impurity measured by Haynes rule was 130 meV.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.10
• /
• pp.829-838
• /
• 2007

The stochiometric mix of evaporating materials for the $CdGa_2Se_4$ single crystal thin films was prepared from horizontal furnace. To obtain the single crystal thin films, $CdGa_2Se_4$ mixed crystal was deposited on thoroughly etched semi-insulating GaAs(100) substrate by the Hot Wall Epitaxy (HWE) system. The source and substrate temperature were $630^{\circ}C$ and $420^{\circ}C$, respectively. The crystalline structure of single crystal thin films was investigated by the photoluminescence and double crystal X-ray diffraction (DCXD).The carrier density and mobility of $CdGa_2Se_4$ single crystal thin films measured from Hall effect by van der Pauw method are $8.27{\times}10^{17}\;cm^{-3},\;345\;cm^2/V{\cdot}s$ at 293 K. respectively. The temperature dependence of the energy band gap of the $CdGa_2Se_4$ obtained from the absorption spectra was well described by the Varshni's relation, $Eg(T)\;=\;2.6400\;eV\;-\;(7.721{\times}10^{-4}\;eV/K)T^2/(T+399\;K)$. After the as-grown single crystal $CdGa_2Se_4$ thin films were annealed in Cd-, Se-, and Ga -atmospheres, the origin of point defects of single crystal $CdGa_2Se_4$ thin films has been investigated by PL at 10 K. The native defects of $V_{Cd}$, $V_{Se}$, $Cd_{int}$, and $Se_{int}$ obtained by PL measurements were classified as donors or accepters. We concluded that the heat-treatment in the Cd-atmosphere converted single crystal $CdGa_2Se_4$ thin films to an optical p-type. Also, we confirmed that Ga in $CdGa_2Se_4/GaAs$ did not form the native defects because Ga in single crystal $CdGa_2Se_4$ thin films existed in the form of stable bonds.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.6
• /
• pp.209-220
• /
• 2014

Compressive Sensing (CS) is a new signal acquisition paradigm which enables sampling under Nyquist rate for a special kind of signal called sparse signal. There are plenty of CS recovery methods but their performance are still challenging, especially at a low sub-rate. For CS recovery of natural images, regularizations exploiting some prior information can be used in order to enhance CS performance. In this context, this paper addresses improving quality of reconstructed natural images based on Dantzig selector and smooth filters (i.e., Gaussian filter and nonlocal means filter) to generate a new regularization called smooth residual error regularization. Moreover, total variation has been proved for its success in preserving edge objects and boundary of reconstructed images. Therefore, effectiveness of the proposed regularization is verified by experimenting it using augmented Lagrangian total variation minimization. This framework is considered as a new CS recovery seeking smoothness in residual images. Experimental results demonstrate significant improvement of the proposed framework over some other CS recoveries both in subjective and objective qualities. In the best case, our algorithm gains up to 9.14 dB compared with the CS recovery using Bayesian framework.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.27 no.1
• /
• pp.15-24
• /
• 2001

The purpose of this study is to evaluate the tissue response in applying of various bone substitutes included toothash-plaster mixture, resorbable hydroxylapatite (HA) and demineralized freeze-dried bone and to show the clinical usefulness of toothash-plaster mixture for the repair of craniomaxillofacial bone defect. For this experiment, 100 Sprague-Dawley rats weighing 200gm or more were used. There were four experimental groups: group I, toothash-plaster mixture; group II, demineralized freeze-dried bone; group III, resorbable HA; and group IV, control group. A full thickness, round bone defect measuring 10mm in diameter was created in the midcranium, and the substitutes cited above were embedded in the experimental rats based on their group assignment. Blood clot was filled in the rats assigned to the control group. Experimental rats were sacrificed on the 1st, 3rd, 5th, 8th, 12th and 24th week after implantation and stained with the hematoxylineosin, Masson's Trichrome, using Van Gieson's stain method, and were examined under light microscope. The results were as follows: 1. In all the groups, prominent inflammatory reaction and the infiltration of multinucleated giant cells were noted during the early stage. Gradual healing decreased this reaction. 2. Among the rats in the experimental group II, which were given demineralized freeze-dried bone implants, active formation of new bone traveculae manifested. Chondroid tissues appeared, and it was suggested that the defect was filled with newly formed bone by virtue of osteoinductive activity. On the 12th week after the experiments, most of the defect was filled with newly formed bone trabeculae. 3. In experimental groups I and III, it was noted that HA manifested a healing process similar to that characterized by the toothash-plaster mixture, but inflammatory reaction was more prominent in experimental group I. Active osteoblasts were observed along the periphery of osteoid tissues, while newly formed bone trabeculae appeared adjacent to the implanted materials three weeks later. Formation increased to the extent that newly formed bone trabeculae fused directly with the host bone. Increase in new bone ingrowth into the filling materials was revealed by both experimental groups. 4. In the control group, new bone formation adjacent to the host bone was observed, but most of the defect was filled with mature connective tissue 24 weeks after the experiments.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.4
• /
• pp.409-416
• /
• 2011

A mobile emission laboratory (MEL) was designed to measure the amount of traffic pollutants with high temporal and spatial resolution under real conditions. Equipment for gas-phase measurements of quantity of CO, NOx, $CO_2$, and THC and for the measurement of the number density and size distribution of fine and ultra-fine particles by a FMPS and a CPC were placed in a mini-van. The exhaust of different type of vehicles can be sampled by MEL. This paper describes the construction and technical details of the MEL and presents data from the experiment in which a car chases city buses fuelled by diesel, CNG, and LPG. The diameters of most particles in the exhaust of the diesel city bus were less than 300 nm and most of the particles had a diameter of 30-60 nm. However, most particles in the exhaust of the CNG and LPG city buses were nanoparticles (diameter: less than 50 nm).

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.2 no.2
• /
• pp.101-109
• /
• 1997

The present study was carried out to investigate the temporal and spatial changes in species composition and abundance of polychaetes in Lake Shihwa. Macrobenthic fauna were collected from eight sampling surveys performed in March, June, September and December of 1994, March and October of 1995, February and August of 1996, using a modified van Veen grab with 0.1 $m^2$ coverage area. Polychaete worms, the most abundant macrofaunal group, comprised of 1~22 species at each investigation; number of species continuously decreased during the survey period. The mean density of polychaete was $794{\pm}1,275\;indiv.{\cdot}m^{-2}$ and showed a large fluctuation over time. The variation in abundance was mainly coupled with the domination of Polydora ligni occupying 83% in total density. The next dominant species were Pseudopolydora kempi (mean density of 31 $indiv.{\cdot}m^{-2}$) and Capitella capitata (mean density of 23 $indiv.{\cdot}m^{-2}$). Abundant polychaetes in Lake Shihwa are known to be tolerant to sediment pollution. Ecological indices such as diversity (H') and dominance (D) also indicated that the number of species significantly decreased and a few species predominated in Lake Shihwa after the dike construction. The azoic zone were extended from the upper reach of Lake Shihwa to the vicinity of the dike over time. The reduced number of species, predominance of pollution indicator species and development of an azoic zone reflect severe deterioration of benthic environments in Lake Shihwa.

• Journal of Korea Spatial Information System Society
• /
• v.4 no.2 s.8
• /
• pp.55-64
• /
• 2002

VEfficient generation of road data is one of the most important issues in GIS (Geographic Information System). In this paper, we propose a hybrid approach for automatic generation of road data by combining mobile mapping and image processing techniques. Mobile mapping systems have a form of vehicle equipped with CCD camera, GPS, and INS. They can calculate absolute position of objects that appear in acquired image by photogrammetry, but it is labor-intensive and time-consuming. Automatic road detection methods have been studied also by image processing technology. However, the methods are likely to fail because of obstacles and exceptive conditions in the real world. To overcome the problems, we suggest a hybrid method for automatic road generation, by exploiting both GPS/INS data acquired by mobile mapping system and image processing algorithms. We design an estimator to estimate 3-D coordinates of road line and corresponding location in an image. The estimation process reduces complicated image processing operations that find road line. The missing coordinates of road line due to failure of estimation are obtained by cubic spline interpolation. The interpolation is done piecewise, separated by rapid change such as road intersection. We present experimental results of the suggested estimation and interpolation methods with image sequences acquired by mobile mapping system, and show that the methods are effective in generation of road data.