• 한국항공우주학회지
• /
• 제43권11호
• /
• pp.1028-1034
• /
• 2015

발사체에 적용되는 솔레노이드 밸브의 경우 산업용 솔레노이드 밸브에 비해 엄격한 전류 및 무게, 크기 제한 조건을 요구한다. 이러한 제한 조건을 만족하며, 솔레노이드 밸브의 작동을 보장하기 위한 추진제탱크 가압제어용 솔레노이드 밸브 설계를 수행하였다. 극저온 상태에서 솔레노이드 전류 상승을 방지하기 위해 구리와 콘스탄탄 재료를 사용한 새로운 형태의 코일 설계를 적용하였으며, 시제품을 이용한 시험결과 측정된 전류는 설계 규격을 만족하고 있다.

• 한국인터넷방송통신학회논문지
• /
• 제12권2호
• /
• pp.77-83
• /
• 2012

진공 시스템의 성능에 대한 밸브 컨덕턴스의 영향은 진공시스템의 설계 최적화를 위해 전산모사 되었다. 본 연구에서는, 전산모사기인 VacSimMulti에 의한 모델링기구가 제시되었다. 진공 시스템의 설계는 진공 장비의 다양한 산업적 구현을 위해 특정한 프로세스 조건을 충족해야 한다. 진공 밸브의 구조, 길이, 직경 등은 컨덕턴스 영향의 전산모사 변수로서 모델링 되었으며, 직렬 진공 시스템의 배기 밸브 또한, 다양한 크기와 구조로 모델링하여 전산모사되었다. 밸브 직경의 변화는 도관의 길이의 변화보다 진공특성에 있어 더 유의미한 효과를 보여주었으며 슬릿형의 밸브도관 시스템은 모델링된 밸브구조 중 가장 뛰어난 진공특성을 가지는 것으로 관찰 되었다.

• 한국정밀공학회지
• /
• 제15권12호
• /
• pp.142-147
• /
• 1998

Developing robot hands with multi-degree-of-freedom is one of the topics that researchers have recently begun to improve the limitation by adding flexibility and dexterity. In this study, an articulated servo-pneumatic robot hand system with direct-drive joints has been developed whose main feature is the minimization of the dimension. The servo-pneumatic system is advantageous to fabricate a dexterous robot hand system due to the high torque-to-weight and torque-to-volume ratio. This enables the design of a finger joint with an integrated rotary vane type actuator which produces high output torque without reduction gears, being very robust. In order to control the servo-pneumatic finger joints, a miniature proportional valve that can be attached to the robot hand is required. In this paper, a flapper nozzle type 4/3-way proportional directional valve has been designed and tested. The experimental results show that the developed valve can control a finger joint satisfactorily without much vibratory joint movements and acoustic noises.

• 항공우주기술
• /
• 제11권2호
• /
• pp.109-116
• /
• 2012

우주발사체의 액체추진공급시스템에서 사용되는 연료 벤트/릴리프밸브는 안전밸브의 조합체로 지상에서 연료를 주입할 때와 비행 중에 추진제 탱크의 과압을 해소하는 역할을 한다. 벤트/릴리프밸브는 구동가스 공급에 의해 벤트밸브를 작동시키는 벤트모드와 설정된 압력을 유지하기 위해 자동으로 밸브를 개폐하는 릴리프모드로 작동한다. 본 논문에서는 해외발사체에 사용된(Saturn) 벤트/릴리프밸브 샘플을 이용하여 한국형발사체의 규격에 적용한 밸브 설계를 검토하였다. 또한 설계 검증 및 기본적인 작동 특성을 분석하기 위해 AMESim 상용코드를 이용하여 해석 모델을 구성하였다. 밸브 모델을 이용해서 동특성 해석을 수행하여 설계 변수에 대해 밸브 개폐 작동시간, 작동성능, 개폐압력을 예상하였다. 이를 통해 연료 벤트/릴리프밸브 설계변수에 따른 작동성을 파악하여 시제품 제작 전 의 상세설계 및 설계 경계조건을 제시하였다.

• 한국정밀공학회지
• /
• 제11권4호
• /
• pp.148-157
• /
• 1994

A multi-cylindrical hydraulic valve incorporating with an electro-rheological(ER) fluid is developed in this study. Field-dependent Bingham properties of the ER fluid are exploited to devise the valve system which features fast system response as well as simple mechanism. The fast response is accrued from almost instant response characteristics of the ER fluid itself, and the mechanism configuration is simplified since no nechanically moving parts are required. The material properties of the ER fluids to be utilized for modeling of the proposed valve system are firstly tested with a couette-type electroviscometer. The design and manufacturing processes are then undertaken on the basis of model parameters. The performance characteristics of the valve system are evaluated in terms of pressure variations with respect to the intensity of employed electric fields and flow rates.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제2권2호
• /
• pp.239-245
• /
• 2013

Modern electric controlled valves are demanded that its solenoid actuator should be smaller size, lighter weight, lower consumption power, and higher response time. For achieving these purposes, the major design factors of solenoid actuator such as magnetic flux density, coil turn numbers, plunger size, bobbin dimension, and etc. are must be optimized. In this study, for optimal design of high speed solenoid actuator for hydraulic servo valve operation, we draw up governing equations which are composed by combination of electromagnetic theories and empirical knowledge, and deduct the values of major design factors by use of them. For more increase the operating speed, voice coil are used as main armature in manufacturing of prototype actuator. And, we have proven the propriety of the governing equations and speed increasing method by experiments using the hydraulic valve assembly adopted the prototype of solenoid actuator.

• 한국자동차공학회논문집
• /
• 제10권3호
• /
• pp.85-92
• /
• 2002

This paper presents the effects of design and operating parameters to meet the static and dynamic performances of the electro-mechanical valve(EMV) actuator which can provide more flexible controllability of valve events compared to conventional variable valve actuation devices. The model of the EMV system was also set up and applied to identify the dynamic behavior of the system. And the effects of external disturbances were also investigated such as cylinder pressure, armature neutral position and current supplying time effects and so on. Experiments were carried out to verify the model using the prototype actuator on test bench, it was found that there is a relatively good agreement between experimental data and modeling results. Also, the actuators meet the general engine speed range (over 6000rpm) and the variable valve event control for various VVT effects.

• 동력기계공학회지
• /
• 제19권5호
• /
• pp.93-98
• /
• 2015

Nuclear power plants has a number of valves, which are operating at a high temperature-high pressure and radiation environment conditions. Nevertheless, it is important to maintain the reliability of the valves to ensure safe operation of the nuclear power plant. However, the aging of the valves by increasing of years of plant operation and the system transients due to the sudden load change are working the failures of the reliability of the valve. In this paper, we evaluate experimentally the performance change according to the thermal aging of the valve. Results show that the valve stem and the actuator leakages were enlarged by the thermal aging.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.136-136
• /
• 2000

The direct drive servo valve(DDV) is composed of a DC rotor, link, valve spool and displacement sensor(LVDT) where the spool is directly coupled to the DC motor through the link. Since the DDV is a kind of one-stage valve, the robust controller is required to overcome the flow force effect on the spool motion. The mathematical equations are derived and the stability, accuracy and response speed of a DDV are investigated analytically using a linearized system block diagram. Proportional control, PID control. Time-Delay control, Sliding Mode control, and Proportional control using the load pressure are applied to DDV to find which one shows the best control performance. The digital computer simulation results show that the proportional control using the load pressure satisfies the design requirement of response speed and steady state error regardless of the variation of load pressure,

• 한국정밀공학회지
• /
• 제27권5호
• /
• pp.27-35
• /
• 2010

A loader used for uploading materials into truck is a kind of construction equipment. Mainly, a wheel loader is applied to construction work. Recently, an automatic transmission for the wheel loader is used to help drivers get the repetitive works done comfortably. It is composed of geartrain, clutch pack, hydraulic control system and TCU. Especially, a high-performance proportional control valve and its control algorithm is demanded to achieve the shift quality during a change of speed. In this paper, the commercial package program was used in order to justify model of the proportional control valve and simulate it. Steady-state and dynamic characteristics of PCV were analyzed to classify attractive forces and hydraulic control characteristics. This model also was verified the validity compared to the experimental result. Using the developed model, performances of PCV were predicted as studying design parameters.