• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.37 no.4 s.112
• /
• pp.8-17
• /
• 2005

WCT (Wet compaction test) is a new fiber evaluation method developed recently by Seo and its test results can be used as a predictor for pulp quality and its paper property Bleached chemical pulps (SwBKP, HwBKP), recycled pulp (OCC), and mechanical pulp (BCTMP) were used for the furnishes to be tested by WCT We compared the WCT results to conventional fiber evaluation tests such as WRV (Water Retention Value), free ness, and fiber length in this study, and found that WCT always gave better regression coefficients in relation to pulp quality (drainage), and paper properties (density, tensile, tear, and burst strength). WCT may be used on-line in papermachine.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1998.10a
• /
• pp.473-480
• /
• 1998

The substructuring pseudodynamic test is a hybrid testing method consisting of a numerical simulation of the earthquake response of an analytical model and a loading test of a specimen. The substructuring pseudodynamic testing technique has been applied to various seismic experiments since it has advantages over the shaking table test to study dynamic behaviors of relatively large scale structures. However, experimental errors are inevitable in substructuring pseudodynamic testing. Some of these errors can be monitored during the test, but, due to limitations in control system, they cannot be eliminated. For example, one cannot control exactly the displacements that are actually imposed on the structures at each time step. This paper focuses on a technique to minimize the cumulative effect of such control errors for MDOF system. For this purpose, the modified posterior adjustment of the time increment from a target value $\Delta$t$_{n}$ to an adjusted value is performed to minimize the effect of the control errors for MDOF system.for MDOF system.

• The Journal of Engineering Geology
• /
• v.26 no.4
• /
• pp.439-445
• /
• 2016

The new airports apply the systematic runway foundation construction to build the high quality runways in order to take the leading position to win future aerial demands and stay ahead of competitors. This study is intended to supplement the weakness of existing standard compaction test to minimize residual settlement of lower weak foundation during operation of passenger berthage. The fill material was sampled from 4 construction sites using the fill material with diameter of 100mm or less, and the standard compacting test (KS F 2312), large circular mold compacting test, and water-replacement field density test (ASTM D 5030) were conducted. The regression analysis of correlation of the field density test and the standard indoor compaction test showed the unreliable value at P-value of 0.05, and the regression analysis of the field density test and the large indoor compaction test showed the high correlation with R value of 0.8878. It is judged that the construction of overall uniform quality can be assured as the site condition is truly reflected only if the compacting test method is selected in consideration of maximum size of fill material when evaluating the maximum dry density used in design and construction.

• Journal of the East Asian Society of Dietary Life
• /
• v.24 no.5
• /
• pp.631-640
• /
• 2014

In this study, manufactured a cream soup by varying addition of Hericium erinaceus and decided its recipe, and conducted particle size analysis, calorimetry, sensory test for investigating physicochemical characteristics and quality characteristics (salinity, sugar content, color value, pH, viscosity), antioxidant activities of soup, and mechanical sensory test for objectivity. This study found that moisture content in Hericium erinaceus powder was 6.16%, crude protein 26.87%, crude fat 4.62% and crude ash was 10.75% respectively. No significant differences were found in salinity, sugar content, pH according to addition of Hericium erinaceus. As for color value of cream soup manufactured by adding Hericium erinaceus, L value decreased with increase in addition of Hericium erinaceus, whereas a value and b value increased. The more the addition of Hericium erinaceus, the higher the viscosity, which increases concentration of soup. As result of analysis on antioxidant activities of Hericium erinaceus cream soup, antioxidant activities increased with increase in addition of Hericium erinaceus. Particle size analysis showed results similar to that of viscometry, which means that the smaller the particle size, the higher the viscosity, whereas viscosity lowered vice versa. Calorie of cream soup showed no significant difference notwithstanding the amount of addition. As a result of sensory test, S5 with 5% of Hericium erinaceus powder was highest rated in color, flavor, taste, umami taste and overall preference. As a result of mechanical sensory test, umami taste increased with increase in addition of Hericium erinaceus powder, whereas bitterness taste lowered significantly (p<0.05) with addition of Hericium erinaceus. As for salty taste, both control group and experimental group that added Hericium erinaceus powder showed no significant difference. Accordingly, experimental group with 5% of Hericium erinaceus powder was proved to be the most desirable.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2004.06a
• /
• pp.257-258
• /
• 2004

The dose from radionuclides released from high-level radioactive waste (HLW) glasses as they corrode must be taken into account when assessing the performance of a disposal system. In the performance assessment (PA) calculations conducted for the proposed Yucca Mountain, Nevada, disposal system, the release of radionuclides is conservatively assumed to occur at the same rate the glass matrix dissolves. A simple model was developed to calculate the glass dissolution rate of HLW glasses in these PA calculations [1]. For the PA calculations that were conducted for Site Recommendation, it was necessary to identify ranges of parameter values that bounded the dissolution rates of the wide range of HLW glass compositions that will be disposed. The values and ranges of the model parameters for the pH and temperature dependencies were extracted from the results of SPFT, static leach tests, and Soxhlet tests available in the literature. Static leach tests were conducted with a range of glass compositions to measure values for the glass composition parameter. The glass dissolution rate depends on temperature, pH, and the compositions of the glass and solution, The dissolution rate is calculated using Eq. 1: $rate{\;}={\;}k_{o}10^{(ph){\eta})}{\cdot}e^{(-Ea/RT)}{\cdot}(1-Q/K){\;}+{\;}k_{long}$ where $k_{0},\;{\eta}$ and Eaare the parameters for glass composition, pH, $\eta$ and temperature dependence, respectively, and R is the gas constant. The term (1-Q/K) is the affinity term, where Q is the ion activity product of the solution and K is the pseudo-equilibrium constant for the glass. Values of the parameters $k_{0},\;{\eta}\;and\;E_{a}$ are the parameters for glass composition, pH, and temperature dependence, respectively, and R is the gas constant. The term (1-Q/C) is the affinity term, where Q is the ion activity product of the solution and K is the pseudo-equilibrium constant for the glass. Values of the parameters $k_0$, and Ea are determined under test conditions where the value of Q is maintained near zero, so that the value of the affinity term remains near 1. The dissolution rate under conditions in which the value of the affinity term is near 1 is referred to as the forward rate. This is the highest dissolution rate that can occur at a particular pH and temperature. The value of the parameter K is determined from experiments in which the value of the ion activity product approaches the value of K. This results in a decrease in the value of the affinity term and the dissolution rate. The highly dilute solutions required to measure the forward rate and extract values for $k_0$, $\eta$, and Ea can be maintained by conducting dynamic tests in which the test solution is removed from the reaction cell and replaced with fresh solution. In the single-pass flow-through (PFT) test method, this is done by continuously pumping the test solution through the reaction cell. Alternatively, static tests can be conducted with sufficient solution volume that the solution concentrations of dissolved glass components do not increase significantly during the test. Both the SPFT and static tests can ve conducted for a wide range of pH values and temperatures. Both static and SPFt tests have short-comings. the SPFT test requires analysis of several solutions (typically 6-10) at each of several flow rates to determine the glass dissolution rate at each pH and temperature. As will be shown, the rate measured in an SPFt test depends on the solution flow rate. The solutions in static tests will eventually become concentrated enough to affect the dissolution rate. In both the SPFt and static test methods. a compromise is required between the need to minimize the effects of dissolved components on the dissolution rate and the need to attain solution concentrations that are high enough to analyze. In the paper, we compare the results of static leach tests and SPFT tests conducted with simple 5-component glass to confirm the equivalence of SPFT tests and static tests conducted with pH buffer solutions. Tests were conducted over the range pH values that are most relevant for waste glass disssolution in a disposal system. The glass and temperature used in the tests were selected to allow direct comparison with SPFT tests conducted previously. The ability to measure parameter values with more than one test method and an understanding of how the rate measured in each test is affected by various test parameters provides added confidence to the measured values. The dissolution rate of a simple 5-component glass was measured at pH values of 6.2, 8.3, and 9.6 and $70^{\circ}C$ using static tests and single-pass flow-through (SPFT) tests. Similar rates were measured with the two methods. However, the measured rates are about 10X higher than the rates measured previously for a glass having the same composition using an SPFT test method. Differences are attributed to effects of the solution flow rate on the glass dissolution reate and how the specific surface area of crushed glass is estimated. This comparison indicates the need to standardize the SPFT test procedure.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.22 no.4
• /
• pp.82-95
• /
• 1980

This paper complies the results of the studies so far made on the subsoil improvement of subsurface drainage systems for wet paddy fields (those were located in the Gum-Ho area in Kyung Buk province) which had poor permeability and a high water table. In general, a drainage problem is an excess of water on the ground surface which can effect the productivity and bearing capacity of the soil. With drain pipe systems, (According to their depths and spacing) it may be possible to correct that problem. The experimentation consisted of three test plots, two of which included drain pipe systems with varing depths and width spacing of the pipes. The third plot (C) was an ordinary plot being exempt of a drain pipe system. In detail, the depth of plot A was 80 cm, and the width spacings began at 2. Om and increased by 2. Om up to 10. 0m. The depth of plot B was 60cm and the width spacing was the same as plot A. These tests were performed to research specific details; such as crop yeild, bearing capacity of the soil, the amount of underdrainage, surface cracks, root distribution, the water table level, the consumptive water depth and the soil moisture content. The test period lasted three years, from 1977 thru 1979. The results obtained were as follows: 1. During the test period, the weather conditions for the area tested were in accordance with the annual average for that area. Furthermore the precipitation factor during the spring cultivation season, the intermediate drainage period and the harvest drainage period was of optimum conditions for controling surface cracks, because of less precipitation than evaporation. 2. The difference in the level of the ground water table in plots A and B was hardly noticable, but the difference in the test plots and the ord. plot was greatly noticable. The test plots (A, B) were 30 to 40cm lower than the ordinary plot. On the whole, the ground water table of the ord. plot always stayed at a level of 15-20cm beneath the surface of the soil, the ground water table of the test plot A showed The difference in the depth of the pipe lower than the test plot B, while the test plots showed a remarkable descending effect. 3. The soil temperature in plot A was slightly core than in plot B with a difference of 0. 47$^{\circ}$C, but plot A was 1. 6$^{\circ}$C higher than the ord. plot during the flooding period, but after drainage the temperature difference climed to 2. 0$^{\circ}$C. 4. During the 3rd test year, the values of the cracks were recorded with the values of 59cm in plot A, 42cm in plot B and 15cm in the ordinary plot. Plots A and B had increased 2.5 times the value of the first year while the ordinary plot had remained the same. 5. The root weight of the rice was measured at a value of 77.2 gr. for plot A, 73.5 gr. for plot B and 65.3 gr. for the ord. plot. Therefore, the root growths in plots A and B were much more energetic than in the ord. plot. 6. The consumptive water depth measured during the 3rd year resulted in the values of 26. 0mm per day for plot A, and 24.9 mm per day for plot B, respectively. Therefore, both plot A and plot B maintained the optimum consumptive water depths, but the ordinary plot only obtained the value of 12.3 mm per day, which clearly showed less than the optimum consumptive water depth which is 20 to 30 mm/day. 7. The soil moisture content is in direct relationship to the ground water level. During drainage, test plot A decreased in its ground water level much more rapidly than the other two plots. Therefore, plot A had a much less soil moisture content. But this decreased water level could be directly effected by the weather conditions. 8. The relationship between the bearing capacity and the soil moisture content were directly inversely proportional. It can be assumed that the occurence of soil creaks is limited by the soil moisture content. Therefore, the greater the progress of the surface creaks resulted in a greater bearing capacity. So, tast plot A with a greater amount of surface cracks than the other test plots resulted in a greater bearing capacity. But, the bearing capacity at the harvest season could be effected by the drainage during the intermediate drainage period and by the weather conditions. 9. Comparing the production of the test plots to the ord. plot; there was an increased value of 840kg for plot A, 755kg for plot B and 695kg for the ord. plot in the rough rice. Therefore, plot A had an increase of 20% over the ordinary plot. The possibility of producing double crops was investigated. The effects on barley production in the test plots showed a value of 367kg per 10 acres, which substantiated the possibility of double crops because that value showed an increased value over the average yearly yield for those uplands. 10. So as a result, it can be recommended that by including a drain pipe system with the optimum conditions of an (80cm centimeter) depth and a (l0m) spacing will have a definite positive effect on the over all production capacity and quality of wetpaddy fields.

• Culinary science and hospitality research
• /
• v.24 no.3
• /
• pp.35-46
• /
• 2018

This study investigated the quality characteristics of makpyeon made of dry milled rice powder according to soaking time. Makpyeon samples made of dry milled rice powder were analyzied with various soacking time, the moisture content, pH, Hunter's color value texture characteristics, attribute difference test and acceptance test. The moisture content of makpyeon did not indicate difference among samples. pH resulted in MS90 showed the lowest moisture content. The L-value (lightness) and a-value (greenness) result in that MS0 showed the highest and decreased according to soaking time. The b-value (yellowness) increased according to soaking time, MS90 showed the highest. TPA resulted in that MS90 indicated the highest hardness, chewiness, gumminess and the lowest adhesiveness. Hardness of makpyeon samples was higher than sulgitteok samples, adhesiveness was lower than those of sulgitteok in each soaking time. Based on attribute difference test, the score of brightness, moistness, glossy, particle size were decreased and firmness were increased according to soaking times. Flavor, taste and mouth feel attribute was stronger in makpyeon samples with the longer soaking time. Acceptance results showed that MS0 and MS30 (soaking for 30 min) were preferred the most. Also limitations and future research directions of this study were discussed.

• Laser Solutions
• /
• v.1 no.1
• /
• pp.4-10
• /
• 1998

A basic research for tailored blank welding between mild steel and Zn-coated steel was carried out with $CO_2$ laser beam. The materials used in this work were low carbon steel sheet with a thickness of 1.2mm and Zn-coated steel sheet with the same thickness and 6.3$\mu$m Zn coating. Experiments were carried out by applying the Taguchi method in order to obtain optimized conditions for the application of tailored blank laser welding method in practical manufacturing process. Optical microscopy, XRD, SEM and TEM analysis were performed to observe microstructures and to determine the solidification mode of welded zone. Also mechanical properties were measured by microhardness test tensile test and Erichsen test in order to evaluate the formability of welded specimen. There was no trapped Zn in the fusion zone, and the phases in this region consisted of polygonal ferrite, quasi-polygonal ferrite, banitic ferrite and martensite. The elongation value of welded specimen was more than 80% of that value in the substrate and LDH value was more than 90% of that value in the substrate metal.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.10
• /
• pp.255-265
• /
• 2020

This study aims to test the interrelationship among perceived value, tourist satisfaction, quality of life, and tourist loyalty in an Indonesian tourist adventure destination. The respondents were recruited from Bromo Mountain, East-Java Province, Indonesia. For this study, 250 questionnaires were distributed, of which 240 could be used for analysis, yielding a response rate of 96%. Data was analyzed using Partial Least Squares with smartPLS 3 software. Both outer model and inner model evaluation were conducted to ensure the robustness of the proposed model. The findings showed that perceived value does not have a direct significant effect on tourist loyalty. However, tourist satisfaction and quality of life have significant effects on tourist loyalty. The mediating effect test indicated that tourist satisfaction and quality of life significantly mediated the effect of perceived value on tourist loyalty. The multi-group analysis test found that the demographic factor does not have any influence. By accomplishing its research objectives, this study provides both theoretical and practical contributions. From a theoretical standpoint, this study provides a comprehensive conceptual model in explaining Indonesia adventure tourist loyalty. From a practical standpoint, this study offers recommendations to adventure tourism management to enhance the sustainability of the tourism destination, especially the adventure tourism destination.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.30 no.3
• /
• pp.177-183
• /
• 2016

The purpose of this study was to evaluate the reliabilities of questions and diagnostic value of the Korean Sasang Constitutional Diagnostic Questionnaire(KS-15). The young adults aged 20's participated in this study. The first survey was conducted in march, 2016, and the second one was conducted two weeks later. Three hundred and three questionnaires and the informed consent were obtained from all participants. The test-retest kappa analysis was used to identify the reliabilities of the questions and diagnostic value, and the significance level was .05. The number of subjects was 303 [87(28.7%)males and 216(71.3%)females]. The Cronbach's α were .630 in 6 characteristic questions. The test-retest reliabilities of questions were ranged from .469 to 734. The agreement rate of KS-15 between the first and second constitutional diagnostic value was 87.13%(Kappa=0.794). The higher Sasang constitutional probability score in first survey resulted in the higher agreement rate between first and second diagnostic value. KS-15 seems to be a reliable implement. Further studies for the reliability of the people of different ages and suitable cut off point in Sasang constitutional probability score are needed for the practical use of KS-15.