• The Transactions of the Korea Information Processing Society
• /
• v.5 no.3
• /
• pp.715-719
• /
• 1998

In this paper, we propose a color enhancement system which is based on the improvement of transition time problem and specific color detection stability. The proposcd system apply the time difference correction step to corrects time difference which is taken place at the transimission process between color signal and color subcarrier signal and to reduce detection errors. And also, we proposed stability method to improve transition time problem and detection efficiency as the control of reference color. The proposed system controls specific color when the mean difference value of detected voltages greater than the value of minimum discriminate voltages of two adjacent color signals. Thus, the color enhancement system improves detection efficiency and controls specific color from the color signal without overlapping of correction range.

• Journal of KIISE:Information Networking
• /
• v.29 no.4
• /
• pp.346-351
• /
• 2002

We improve a new probabilistic public key cryptosystem, in which the one wav function was defined only on the discrete logarithmic functions, proposed by Okamoto and Uchiyama. The plaintexts are calculated from the modular product of two these functions, one of which has a fixed value depending on a given public key. The improvement is achieved by a well-chosen public key assuming an unit element 1 as the fixed function value. Because it is possible to reduce the number of operations at the decryption. Also the concrete method for a public key of our improved scheme is suggested.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2001.06a
• /
• pp.346-353
• /
• 2001

Zirconia powder containing 3 mol% yttria(3Y-PSZ) with and with out Fe$_2$O$_3$ addition was coated on tile cast iron substrate by plasma spraying method. The erosion experiments were performed at temperatures from $25^{\circ}C$ to $600^{\circ}C$. A gas blast type erosion tester was used to examine erosion behavior of the specimens. The results of 3Y-PSZ coatings showed that tile erosion rate had maximum value at 40$0^{\circ}C$. It coincided with tile results of phase transformation tetragonal phase to monoclinic phase caused by low temperature thermal degradation. The tensile stress relaxation and the micro-hardness improvement significantly influenced on the erosion rate at $600^{\circ}C$. In the case of Fe$_2$O$_3$ added 3Y-PSZ coatings, the erosion rate of tested at $25^{\circ}C$ showed maximum value at 5.0 mol% Fe$_2$O$_3$ added coating. This tendency is caused by the improvement of mechanical properties and the tensile residual stress. The erosion rate at 200'c and 400'L showed significantly decrease by Fe203 addition. This decrease is believed to be the stabilization of the tetragonal phase and the increase of micro-hardness.

• Journal of Korean Society of Water and Wastewater
• /
• v.19 no.3
• /
• pp.330-337
• /
• 2005

This study was carried out to propose the managemental improvement of the purification plants and the distribution facilities which can minimize the formation of disinfection by-products in drinking water distribution system. The disinfection by-products were highly created in the water treatment plant that the organic matters were high and the chlorine dosage was excessive. The concentration of DSPs was shown the highest value in August and the lowest value in December, because of temperature and pre-chlorine dosage effect. From the result of tracer test, the travel time from the treatment plant to the end of pipeline was around 3-4 days in summer, 5-6 days in winter, respectively, and the DSPs concentration of the reservoir(end of pipe) was 2-3 times higher than that of the beginning point. The improvement of the chlorination process and structural reformation of distribution facility was demanded to minimize the DSPs increase from purification plant to the end of pipe.

• Food Science of Animal Resources
• /
• v.38 no.4
• /
• pp.653-663
• /
• 2018

Lamb has long been considered a traditional meal within Australia; however as consumer preferences have changed since the 1950's, consumption of lamb has decreased from the 1980's. This is the result of changing societal roles, particularly for females, decreasing household sizes and increasing awareness of the impact of food choices on human health. Since the 1980's improvement of farm practices and increases in genetic gains has addressed part of this decline by increasing the amount of lean meat and decreasing fat in lamb retail cuts. Yet, this has created a challenge for the industry to utilise the larger carcases now being produced. Thus, a whole value chain approach to increasing consumption has been undertaken through several research programs to create cuts which suit the modern consumer, examine nutritional and eating quality and increase adoption of value added cuts. Therefore, this paper outlines this history of changing consumer patterns and the consequent research to address these changes.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.11a
• /
• pp.129-132
• /
• 2012

Value Engineering(VE) process is going to make a series of improvements for the effective construction project management or optimal proposal to improve quality, performance improvement, cost reduction and customer satisfaction. For making the quality model based on better than the architecture that is required in the VE, such a project promoting creative plan, functionality and constructability reflecting the materials and improved construction methods and building life cycle for reviewing the smooth progress of the construction projects may be necessary for management techniques. This study is to establish a management plan in the educational facilities construction process through education institution's recent orders completed by VE case study.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 1998.10a
• /
• pp.467-472
• /
• 1998

The interface friction angle between soil and fibers is important to evaluate improvement of the shear strength on fiber mixed soils. Direct shear test and pullout tort conducted by an apparatus made specially for the purpose of this study, was analyzed to know how fiber and soils affect on interface friction angle. By the results, The value of interface friction angle of sandy soils is larger than that of clayey soils. As a diameter of fiber is large, the value of friction coefficient of sandy soil is increase and that of clayey soil is decrease. An interface friction angle of well graded soil is larger value than that of uniform graded soil

• Korean Journal of Digital Imaging in Medicine
• /
• v.12 no.1
• /
• pp.19-25
• /
• 2010

This study is mainly for the reduction of exposure dose by using a heavy elements filter(Gd) in the digital radiology. They contained heavy elements filter of Gd and X-ray beam hardening filters such as Al and Cu. According to the results of experimental evaluation, X-ray property was not changed with variety of kVp in the case of the Gd filter. The surface dose and absorption dose were increased in order of Cu and Al. The contrast of image showed the higher value in order of Cu, Al and Gd. While the use of Gd has increased the numerical value of the CR image, and grayscale has decreased noise value of the DR image.

• Journal of the Korea Safety Management & Science
• /
• v.6 no.2
• /
• pp.167-178
• /
• 2004

Supply chain management and e-procurement system built in the company, are set goal of internal process improvement. This paper show how SLV(Supplier Lifetime Value) can be used to structure the supplier in automotive part manufacturer, the method of selection is described and a detailed example of how SLV can be used and allocation of order Quantity for the selected suppliers also are provided, and aims at giving a method to realization profitable supplier relation using search for SL V system development which is making corporation with supplier, in the favor of decision supplier.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.24 no.3
• /
• pp.440-447
• /
• 2000

The effects of DP finishing conditions including process technique and finishing agent on the mechanical properties and hand of cotton fabrics were investigated. 100% cotton fabrics were treated with NMA/DMDHEU and NMA/YF using wet-fixation and steam-fixation process. For comparison, conventional pad-dry-cure process was used with DMDHEU. After DP finishing, tensile and compressional resilience increased and bending hysteresis decreased, resulting in the improvement of dimensional stability of cotton fabric. WF and SF process rendered fabrics better shear properties, tensile energy, and compressional linearity and energy than PDC process. However, SF process produced fabrics with higher geometrical roughness than WF process. After DP finishing, primary hand values except Koshi increased, resulting in the increase of total hand value of cotton fabric.